how to get updates sky uk card

jgc115 said:

Will do and I presume I should remove the # from the Oscam.usr config?

Of course I wont know whether this works for a month or so.

Thanks again!!:thum:

Click to expand...

you can remove # or not upto you . these are extra settings not needed really .

let us know mate .

have a big problem with this setup
i have everything now working
eccept i cannot clear movies or sports
this is my log

**** OSCam << cardserver started at Sat Jul 16 10:17:56 2011
-------------------------------------------------------------------------------
2011/07/16 10:17:56 2CE3F4B0 c **** OSCam << cardserver started version 1.00-unstable_svn, build #4842 (mipsel-oe-linux)
2011/07/16 10:17:56 2CE3F4B0 c version=1.00-unstable_svn, build #4842, system=mipsel-oe-linux, nice=-1
2011/07/16 10:17:56 2CE3F4B0 c client max. idle=120 sec, debug level=0
2011/07/16 10:17:56 2CE3F4B0 c max. logsize=10 Kb
2011/07/16 10:17:56 2CE3F4B0 c client timeout=5000 ms, fallback timeout=2500 ms, cache delay=120 ms
2011/07/16 10:17:56 2CE3F4B0 c Connection closed to client
2011/07/16 10:17:56 2CE3F4B0 c thread 2CE3F4B0 ended!
2011/07/16 10:17:57 2CE3F4B0 c client connected to 12000 port
2011/07/16 10:17:57 2CE3F4B0 c Connection closed to client
2011/07/16 10:17:57 2CE3F4B0 c thread 2CE3F4B0 ended!
2011/07/16 10:17:58 2AAC6C10 s exit with signal 15
2011/07/16 10:17:58 2AAC6C10 s cardserver down

2011/07/16 10:17:58 2AAC6C10 s cardserver down

Click to expand...

it seems like oscam is not running . as you say only movies & sports not clearing then with this version of oscam it may be that you need boxid if you have not put it in already .

post your 3 oscam files & lets take a look mate omitting boxid details .

box key already imputted

[global]
nice = -1
WaitForCards = 1
logfile = /var/local/oscam.log
preferlocalcards = 1
saveinithistory = 1

[webif]
httpport = 8888
httpuser =
httppwd =
admin
httpallowed = 192.168.1.100
# protocols
[newcamd]
key = 0102030405060708091011121314
port = 10000@0963:000000;10001@0963:000000

[reader]
label = skyuk
protocol = internal
enable = 1
device = /dev/sci0
caid = 0963
boxid = xxxxxxxx
detect = cd
mhz = 500
cardmhz = 500
ident = 0963:000000
group = 1
emmcache = 1,3,2
blockemm-g = 1
blockemm-unknown = 1
lb_weight = 101


[account]
user =
pwd =
monlevel = 0
uniq = 0
group = 1,2
au = 1
caid = 0963

port = 10000@0963:000000;10001@0963:000000

i can see you have 1 card , but here you show 2 ports for 2 cards .

clarify this . port 10000 is what you are using for newcamd & what port are you using for CCcam .

post your N line aswell .

N: 192.168.0.100 10000 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

m4nik said:

box key already imputted

[global]
nice = -1
WaitForCards = 1
logfile = /var/local/oscam.log
preferlocalcards = 1
saveinithistory = 1
cachedelay = 120

[webif]
httpport = 8888
httpuser =
httppwd =
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255


# protocols
[newcamd]
key = 0102030405060708091011121314
port = 10000@0963:000000
keepalive = 1

[reader]
label = skyuk
protocol = internal
enable = 1
device = /dev/sci0
caid = 0963
boxid = xxxxxxxx
detect = cd
mhz = 500
cardmhz = 500
ident = 0963:000000
group = 1
emmcache = 1,3,2
blockemm-g = 1
blockemm-unknown = 1
lb_weight = 101


[account]
user =
pwd =
monlevel = 1
uniq = 2
group = 1
au = skyuk
ident = 0963:000000
caid = 0963

Click to expand...

in CCcam.cfg

N: 127.0.0.1 10000 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

try this config with the changes in red .

oscam will only read your card & forward it via the N line to CCcam . you then give C lines to your peers as usual .

upon putting all your settings together make sure you stop oscam then cccam via the blue panel .

restart oscam then cccam . this allows oscam to read the card before cccam .

any changes to configs in oscam will take effect upon restart of oscam

there are many other settings that you can have but this is a basic setting to get going .

still the same
could it be the image im running
im using Newnigma2 V3.2.2 and i am unable to run oscam first the cccam
it runs them both together
cccam 2.1.4/oscam

m4nik said:

still the same
could it be the image im running
im using Newnigma2 V3.2.2 and i am unable to run oscam first the cccam
it runs them both together
cccam 2.1.4/oscam

Click to expand...

what receiver do you have . the image sometimes does make a problem . the 256 will only work with cccam 2.1.3 & earlier .cccam & oscam together is ok .

dm800hd 2.01 clone

in cccam 2.1.4 you have to put the 256 away in

N: 127.0.0.1 10000 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

still no luck
if i add my boxbey to cccam it clears but not with oscam

m4nik said:

dm800hd 2.01 clone

Click to expand...

i thought so . try the nabilo blackhole image this works well with clone dm800hd .

make sure you install a version which is compatible with your bootlader mate .

look around should you want to install that image you will find the cam links file which is called NabiloAddons_bh , aswell as tunisiasat addons manager 3.0 .

either 1 will do . as i cannot attach files i cannot upload it here .

this has all cams & much more for all images .

the only nabilo blackhole i can find is v 012 from 2009
are there any later versions
my boot loader is 082

barney said:

i have setup Oscam and it works good and can connect via mgcamd running on another box and i can clear premium channls without having entered my boxkey but my question is which is my boxkey in oscam i see Boxid ******* and box serial ********
so which is the boxkey is it boxserial or boxid ??
both have 8 digits in hex/dec format .
thnxs for any help as im new to oscam but already liking it quite a lot .
cheers .
----
barney

Click to expand...

in CCcam.cfg you need

boxkey:/dev/sci0 12 34 56 78 this format

in oscam

boxid = 12345678 this format

all up and running on blackhole pheonix
1 more thing ive heard alot about sly sending emms to the card to see if its being used for cs
is there anyway of protecting this by adding mores lines to the server config
thanks for all your help

m4nik said:

all up and running on blackhole pheonix
1 more thing ive heard alot about sly sending emms to the card to see if its being used for cs
is there anyway of protecting this by adding mores lines to the server config
thanks for all your help

Click to expand...

glad to hear your up & running mate .

if you have not added these 2 lines then do so to protect your card . in oscam.server

blockemm-g = 1
blockemm-unknown = 1

allready added thanks