Oscam Emu Chat Thread

  • Thread starter ooOO_SORGOS_OOoo
  • Start date

solarpoweredwok

Registered
Messages
18
This is my client reader. As it is not blocking I assume as you say it will auto send EMM's to the server. Correct me if i am wrong. The chap running the card server which is IRSERVER has enabled it to accept updates from me but does not know how to check if in fact its getting them from me or someone else.

Part of my oscam.server

[reader]
label = IRDETO_CS
enable= 1
protocol=newcamd
key=0102030304050608091011121214
device= xxxxxxxxxxxxxx (IP, Port)
user=xxxxxxx
password=xxxxxx
connectioninit = 1
dropbadcws = 1
group=1
cacheex = 1
inactivitytimeout=1
reconnecttimeout=30

Cheers
 
Last edited:

harryt

Donating Member
Messages
376
in IRSERVER user setup there is a AU box next to each client
the ones that are ticked are the only clients that will be sending updates, as far as i can remember it will only be updating from that client or his own card server. other clients should be using the N line in there cccam.cfg
 

abrasat

Registered
Messages
43
Which oscam-emu should be installed on vu+ duo2 with openpli 6: *mipsel, *mipsoe20 or *openpli40 ?
 

wolvesday

Registered
Messages
4
Hi.Please im beginner with e2 receiver octagon sf4008 have problem to open channels with oscam need some help this my log file.

060200/08DE/4332/30:5A1B7AEDDA1A91A20B7F7133D1F13026): rejected (1 ms) by cccam - SRF zwei HD
2018/03/08 11:23:22 4990E9C1 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0500 PROVID 023800 ECMPID 02CF ANY CHID PMTPID 01FF VPID 0200
2018/03/08 11:23:22 4990E9C1 c (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 0500 PROVID 040810 ECMPID 02D9 ANY CHID PMTPID 01FF VPID 0200
2018/03/08 11:23:22 4990E9C1 c (dvbapi) Demuxer 0 trying to descramble PID 2 CAID 0500 PROVID 050800 ECMPID 02E3 ANY CHID PMTPID 01FF VPID 0200
2018/03/08 11:23:22 4990E9C1 c (dvbapi) Demuxer 0 trying to descramble PID 3 CAID 0500 PROVID 060200 ECMPID 02ED ANY CHID PMTPID 01FF VPID 0200
2018/03/08 11:23:23 4990E9C1 c (ecm) linuxsatsupport (0500@023800/08E2/4332/2A:0D96F225882F3F0B7114E7CBC8A5835E): rejected (1 ms) by cccam - SRF zwei HD
2018/03/08 11:23:23 4990E9C1 c (ecm) linuxsatsupport (0500@040810/18E2/4332/2A:4D392C611DDAE4C6AE15C0E6AB274918): rejected (0 ms) by cccam - SRF zwei HD
2018/03/08 11:23:23 4990E9C1 c (ecm) linuxsatsupport (0500@050800/08E2/4332/2A:12882C0931F5337A4C384B072B7BFCC2): rejected (0 ms) by cccam - SRF zwei HD
2018/03/08 11:23:23 4990E9C1 c (ecm) linuxsatsupport (0500@060200/08DE/4332/30:5A1B7AEDDA1A91A20B7F7133D1F13026): rejected (0 ms) by cccam - SRF zwei HD
2018/03/08 11:23:23 4990E9C1 c (ecm) linuxsatsupport (0500@023800/08E2/4332/2A:0D96F225882F3F0B7114E7CBC8A5835E): rejected (1 ms) by cccam - SRF zwei HD
2018/03/08 11:23:23 4990E9C1 c (ecm) linuxsatsupport (0500@040810/18E2/4332/2A:4D392C611DDAE4C6AE15C0E6AB274918): rejected (1 ms) by cccam - SRF zwei HD
2018/03/08 11:23:23 4990E9C1 c (ecm) linuxsatsupport (0500@050800/08E2/4332/2A:12882C0931F5337A4C384B072B7BFCC2): rejected (0 ms) by cccam - SRF zwei HD
2018/03/08 11:23:23 4990E9C1 c (ecm) linuxsatsupport (0500@060200/08DE/4332/30:5A1B7AEDDA1A91A20B7F7133D1F13026): rejected (0 ms) by cccam - SRF zwei HD
2018/03/08 11:23:24 4990E9C1 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 4 enabled and 0 disabled ecmpids!
2018/03/08 11:23:24 4990E9C1 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
Edit/Delete Message Reply With Quote Multi-Quote This Message Quick reply to this message
Reply
 

dxdy

VIP
Messages
669
is any solution for ARM oscam emu authorization Viaccess 2.5 and 3.0 cards (Oiv HRT 020A00 and 030A00)?

please dont send typical reader config from other oscams because i tried all this configs and ARM cams and nothing work. card work but only authorization wont work...

edit:
with oscam Emu 11420 (without PowerVU from Satvenus Panel) seems authorization is OK for channels 1, 3 and 4 but still waiting for channel 2 (srvid 0386)
 
Last edited:

dank

Registered
Messages
109
STB Alphasat opening the sat's grid 65, 75 and 84W in PVU. Good news, we hope that Oscam will be back before the world cup.
 
O

ooOO_SORGOS_OOoo

@nautilus7 are you here?
Oscam emu patch need fix afn and mtn?
 

Lexzie

Registered
Messages
128
Can anyone please please please bring back the OScam builds WITH SSL support, smartreader and pcsc support?
And perhaps for future use: IPv6 support?

I can't update now (VU+ Zero 4k) because I use a triple smartcardreader.
(I don't know if and how to build one myself, I have only Windows).
 

Lexzie

Registered
Messages
128
Can anyone please please please bring back the OScam builds WITH SSL support, smartreader and pcsc support?
And perhaps for future use: IPv6 support?

I can't update now (VU+ Zero 4k) because I use a triple smartcardreader.
(I don't know if and how to build one myself, I have only Windows).

I got a message that I should install the OScam from this thread, still no smartreader support.
 

Lexzie

Registered
Messages
128

Thanks, I will try that, but I don't know for sure if the Oscam I mentioned
has no smartreader support because it doesn't work on my VU+ Zero 4k.

I installed the one for OpenPLi it doesn't even run!
Can't access the WebIF, config files are in /etc/tuxbox/config/oscam-emu ? Default port 8888 and even if I change that in oscam.config I can't access the WebIF, softcam is not doing anything!

Have I installed the right version? Don't I need a arm-version for mu VU+ Zero 4k?
 
Top