New Qviart One and Duo

raul7

Super VIP
Messages
1,539
Qviart One


8yzx9s.jpg


2uh021z.jpg





Qviart Duo


24cfrwn.jpg



dfuh69.jpg
 
Last edited:

raul7

Super VIP
Messages
1,539
Prometheus ONE 1.05:

Code:
http://www.mediafire.com/download/ekk0l0d9rh6hat3/PROMETHEUS_1.05_QVIART_ONE.bin

Readme:

-FIXED AUDIO PROBLEM
-UNLIMITED PROMETHEUS IKS ACTIVED, YOU JUST NEED TO ENABLE IT IN MENU SERVER (we will make it enabled by default in following firmware upgrade).
-IF YOU PRESS "IPTV" BUTTON AND CHANNELS ARE NOT LEADED, PRESS "OK" BUTTON, THEN "YELLOW" BUTTON, SELECT ONE CHANNEL AND IT WORKS
(after that, channel list always appear when pressing IPTV button). This will be also fixed in next software upgrade
 

raul7

Super VIP
Messages
1,539
Prometheus Qviart Duo 1.05:

Code:
http://www.mediafire.com/download/d542rh2mf7ldtha/PROMETHEUS_1.05_QVIART_DUO.bin

Readme Prometheus Duo 1.05:

- AUDIO PROBLEM FIXED
- TWIN TUNER PVR IN PROMETHEUS WORKING FINE(Disable SKS for this function).
If you only use 1 satellite(for instance ASTRA19º), you need LNB TWIN and two cables to your box, one for each tuner.
You need to create also a NEW Satellite and make channel Search, so you have two different satellites for Astra19 in Antenna Setings, one for each Tuner.
When recording one channel, you have to change the satellite to the other tuner which has separated channels to watch.
 

raul7

Super VIP
Messages
1,539
Prometheus Qviart ONE 1.06:






Code:
http://www.mediafire.com/download/b162or2ycbpdbnv/PROMETHEUS_1.06_QVIART_ONE.bin
 

raul7

Super VIP
Messages
1,539
Prometheus Qviart Duo 1.06:



Code:
http://www.mediafire.com/download/uo0a92bfo6ans2f/PROMETHEUS_1.06_QVIART_DUO.bin
 

raul7

Super VIP
Messages
1,539
PROMETHEUS QVIART ONE/DUO 1.09

Firmware Prometheus 1.09 Qviart DUO
Code:
https://www.mediafire.com/?19trfsveu997li5

Firmware Prometheus 1.09 Qviart ONE
Code:
https://www.mediafire.com/?wkriki5o4sl3eqy
 

pavive

Registered
Messages
2
Prometheus is dead on Qviart One. Just working ok today with a different server.
Try this way instead, after charging 1.09 or higher firm.

Menu + Settings + Update + Server Menu + Unmark Prometheus with remote blue key, then mark Redshare with the blue key, keep only this one before exit (Redshare) and exit. Done.....


El "Prosaqueus" esta muerto.
Pero, funcionando otro perfectamente hoy 22-10-2018, haciendo esto.

Cargar el 1.09 o superior.
Luego, Ajustes- Actualizar-- Menú Server- Quitamos "Prosaqueus" con tecla azul - --
--Marcar Redshare, dejar solo este y salir.

Saludos, pavive
pavive esta en línea ahora Añadir Reputación a pavive Reportar Mensaje
Respuesta rápida a este mensaje
 
Top