New Mecool KIII Pro DVB S2 DVB T2

Diavolo

VIP
Messages
284
Hi,I have just recievd this kIII BOX after I have tested I have found out the problem is the signal is 50%-60% still had the same problem with previous models the signal on terestrial is very good
I tested it on biss it works fine I also tested it iptv works very good. on Kodi very good no more buffering . however I had problems with cccam it doesnt open all of the channels in the package and its slow I think the box needs more engerniring software de-bug
the box has problems such as blurring as you will see on the photos attached below and on SD channels the quality is not good
 
Last edited:

badisou

Registered
Messages
2
I bought a k3 pro 912s so I do not have any information on how to run it .. how do you recommend me to my friends
 

morris-it

Registered
Messages
4
Hi, I have the Mecool KIII Pro, is the same as the Acemax model?
Is there a satellite channel editor for PCs?
In the satellite list, there are none in the West (Atlantic), what can I do?
 

morris-it

Registered
Messages
4
How do I unlock the options:
Restore User Data-Backup Blocked User Data
Currently the two options are in gray!
 

Diavolo

VIP
Messages
284
@ moris-it How do I unlock the options:
Restore User Data-Backup Blocked User Data
Currently the two options are in gray
!goo to satellite list and press red baten add :thum:
 
Last edited:

morris-it

Registered
Messages
4
hbR9Ra.jpg


How are the two options activated?
 

Diavolo

VIP
Messages
284
MECOOL KIII PRO CABLE TUNER NEW OK

GOOD NEWS CABLE TUNER HAS BEEN ADETT ON KIII PRO
ALL OK
PLEASE USE MANUAL SEARCH


INSTALLATION APK VIA USB :thum:
 

tony52

Registered
Messages
44
new to mecool KIII pro dvbS2 dvbT2

Hi,I have just recievd this Mecool kIII pro dvbS2 dvbT2 BOX after I have tested I have found that the signal is 50%-60%, I've no newcam, only cccam, I read in this thread that is possible to upgrade the software can someone please explain to me how to back up in usb drive, or SDcard, and how to install the new software, thi is my first mecool KIII box, so I'm very new on this, so please can you explain on easy way.
thanks in advance
tony
 

Diavolo

VIP
Messages
284
is mate goo to installation|DVB S/S2
enter cod 111111
Smart Date Manager

ccam or oscam red batten add move left and right ccam or newcamd
 

tony52

Registered
Messages
44
is mate goo to installation|DVB S/S2
enter cod 111111
Smart Date Manager

ccam or oscam red batten add move left and right ccam or newcamd

thanks Diavolo (are you Italian?.. I'm) for your prompt response, when I enter the cccam and I press red button and move left/and right only shows cccam no newcam :mecry: any suggestions? please
 
Top