Err.0

j0312

Registered
Messages
1
Hi Guys! I have an old coship 2300a receiver with 'Err.0' on display:-(. There is a JTAG-connector in receiver. How and with what kind of sw can I revive it? Many thanks, bye;-).
 

jeromesat

Registered
Messages
1
coship 2003a err0 not dead

hello,

when you power on your coship 2300a you see for an second the red light then directly err0 without boot message, your coship might not be dead..

you have to use original soft firmware, i used topsat_b10.bin
you have to :
poweron receiver,
start Upgrade32 soft
dont choose com port, load directly .bin file, flash should beging

if not try other original soft like topsat b21, or power on receiver once .bin file has been loaded

if receiver boots.. you have then to upgrade your loader version
for this you can use uptool21.exe, select upgrade boot then load boot3902.bin

once loader updated you can upgrade your software with 39.02 images, you have to use following software: uptoolb343839.exe

hope it helps

wanted to upload files but couldnt find ....
 
Top