TNT Sat - Oscam + CCCam

W

white_westie

Donating Member
Messages
11
zeeteefje said:
Tested my many already: Gbox works fine to write emms to the TNTSAT V5 card, it is just not enough. After Gbox you need to run Scam for about half an hour to receive the final emm(s).
Click to expand...

Was about to pull trigger on a real tntsat box after initial failure with gbox/scam, but gave it another go (never used these sofcams before). Can confirm that using gbox first (overnight in my case), then scam for about 30mins, my V5 card now works.
Thks guys.

STB ET8000 with fresh install of OpenVix, cams from feeds, tuned into TMC channel.
 
K

kalehrl

Registered
Messages
147
This is just to confirm that I have successfully updated my v5 card in internal reader using oscam 11335 followed by scam 3.60.
This is my config.
oscam.conf:
Code: 
[global]
disablelog                    = 1
logfile                       = /dev/tty
waitforcards                  = 0

[dvbapi]
enabled                       = 1
au                            = 1
pmt_mode                      = 0
request_mode                  = 1
user                          = localuser
read_sdt                      = 1
boxtype                       = dreambox

[webif]
httpport                      = 16004
httprefresh                   = 10
httpallowed                   = 127.0.0.1,192.168.0.0-192.168.255.255
oscam.server:
Code: 
[reader]
label                         = tntsat
protocol                      = internal
device                        = /dev/sci0
caid                          = 0500
boxkey                        = 014D902F
deskey                        = 22D60F37567BAB12F505D8C8C71A22E3
detect                        = cd
mhz                           = 500
ident                         = 0500:030B00
aeskeys                       = 0500@030B00:439726EBB6A939A456C05FF6AA606C43,F1DCB15A3DE3FA1D7E2998DA7DD4898A,48C19B86A4E2EB7288DFDCE7C2BB7577,0,0,0,0,0,0,0,0,0,9A3EAB0203EBFFCA85B4F18280749F56,2504B382B16D8C6758DB960E311E9351,349883E54D58336DCA750A878ACC5CD5,4A26AD251795A58A11BBC07B53C44348,2844258792F6D9529A328B3E8CD2FD0E,F62C3BE300E98BBB378DFA38BB6EEEF1,0,0,6B1B024D36F60974973CB81FA5E8F01C,127003F8E95100367A556121C779FB6E,9D73BE61D6498E2F20E157E1C6416A23,1DE5B042AD670BB16A3A76BDAD2F7AC0,6747F2E500CF123428337591435C6585
group                         = 1
emmcache                      = 2,1,2,1
disablecrccws                 = 1
oscam.user:
Code: 
[account]
user                          = localuser
au                            = tntsat
group                         = 1
Run oscam on TF1 until you receive around 20 global EMMs, after that run scam 3.60 for about half an hour. Afterward the card will work in any oscam. Good luck!
 
K

Krrf

Registered
Messages
2
I confirm that the trick described in the post #265 of kalehrl works :wer:. My TNTSat-v5 card is back to life.
  • Channel set on TF1 yesterday during all night long with OScam 11359 and the config given by kalehrl
  • This morning, still no image but changed current Softcam from Oscam to Scam 3.60
  • Current channel still set on TF1
  • This afternoon, still no image, but when I switched the Softcam back to Oscam, miracle, the image was back :)
This process has been executed on my DM8000 running OpenPLI 4.
 
Last edited:
H

hibees09

Registered
Messages
175
I have a TNTSAT V6 card

It works perfect between the hours of 8am-6pm then goes black screen

any way to update this as i watch shows at night

cheers
 
H

hibees09

Registered
Messages
175
I have a TNTSAT V6 card

It works perfect between the hours of 8am-6pm then goes black screen

any way to update this as i watch shows at night

cheers
 
E

echweesnet

Registered
Messages
1
I can confirm the the gbox + scam method worked for me with the v5 card. The important thing is to be sure that gbox and scam actually have "communication" with the card. I only managed to do that with a smargo, not with the internal reader of my edision osminiplus.
 
V

viasatt

Registered
Messages
29
kalehrl said:
Run oscam on TF1 until you receive around 20 global EMMs, after that run scam 3.60 for about half an hour. Afterward the card will work in any oscam. Good luck!
Click to expand...

Hello
In how many hours did you received 20 global emm's?
In one hour I didn't received anything.
Thanks a lot!
Best Regards!
 
V

viasatt

Registered
Messages
29
Thank you for your answer.
I'm using your oscam files on dm7080 ,but on TF1 I didn't received any kind of emm .at least it's not showing in oscam webif.
Card it's initializing ok,the sub date it's ok,but no emm.
Do you have any ideea what it's wrong?
Best Regards!
 
V

viasatt

Registered
Messages
29
It's too late to edit my previous post,so I write here:problem solved ,it was my fault,the username from dvbapi was different from oscam.user.
After that,in 15 minutes I've received 30 global emm's and later in scam,after 10 minutes everything works.
Big thanks to all here,no need to buy an official cam or stb.
Best Regards!
 
V

viasatt

Registered
Messages
29
If you dont't know that,what is the point in having an TNT sat card?
Anyway,to ask your question,TF1 it's a French chanel on Astra 19 ,and you need to wait for EMM's on that chanel using oscam.
Best Regards!
 
ELECTRIK DZ

ELECTRIK DZ

VIP
Messages
1,333
new aeskey
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
Click to expand...
 
H

hibees09

Registered
Messages
175
I am running a vusolo and i am getting high ecm times and freezes with my local tntsat card on 19.2 east

anyway to stop this?

cheers
 
You must log in or register to reply here.
Top