How to add INTERACTIVE channels manually to your 9100

Status
Not open for further replies.

satelliteman

Registered
Messages
97
So to add interactive channels manually we need to know the Service ID aswell as this other info.. for example:-

lets use the BBC interactive 'channels' as an example,
All of the info in the list below is required.

Frequency = 12441 V
Symbol rate= 27500
the FEC = 2/3
Service...VPID APID Service ID
BBCi 0....2305 2306 6880
BBCi 1....2321 2322 6881
BBCi 2....2325 2326 6882
BBCi 3....2329 2330 6883
BBCi 4....2333 2334 6884
BBCi 5....2337 2338 6885
BBCi 6....2345 2346 6886

use your remote
press SETUP
select SATELLITE INSTALLATION & TP EDIT
select MANUAL SATELLITE SEARCH
change satellite to 28.2E Eurobird 1
change frequency to 12441
change polarity to vertical
change FEC to 2/3
change SYMBOL RATE to 27500
press YELLOW BUTTON (enter pids)
on next screen change Name, VideoPID AudioPID and Service PID to the settings required from the list above. (do this by highlighting the box you wish to change then press OK on remote, once changed press OK again)
Press yellow to test it works, (then exit to return)
I dont know if this is needed but i let it read the NIT on each channel to get the TSID & ONID
press the BLUE BUTTON (save)

Repeat for all channels you wish to enter.

And there you have it ... a guide to entering interactive channels manually courtesy of Rodeo & Robxxx7

Robxxx7 also found out that these particular channels are located as DATA streams on 28.2E under the names of:-

STREAM-0
STREAM-1
STREAM-2
STREAM-3
STREAM-4
STREAM-5
STREAM-6

Instead of adding manually you can simply use DREAMBOXEDIT to import your settings then change the STREAM-0 to STREAM-6 to TV from DATA
then export the changed info back to your 9100 to be able to view the DATA streams as TV images instead .
 
Status
Not open for further replies.
Top