anyone in or close to barnsley

J

jud1255

Registered
Messages
165
is there anybody close to me where i can iether bring this piece of shit for you to sort out ,(yes i agree its me that's shit not the box lol) or if you wanna come to me feel free , im willing to cover cost a drink etc, im at my wits end and ready for throwing it thru the window,
all i want is for this 9000hd to be up n running on egnima 2.
any suggestions are welcome
thanks jud
 
K

keano16

Donating Member
Messages
344
m8 best thing to do would be to flash it with the last PKT image.

Not the usb image but the flash image, its dead easy and has been going strong on mine for ages now.
oscam and crossepg working 100%.


Have you flash the box before with a dgstation image ?


Here is the link, download the flash version.

h**p://e2.pkteam.pl/index.php?dir=IMAGE%20IPBOX%20CUBEREVO/Enigma2/1.0.0.457_flash_Gold/
 
Last edited:
B

brianmullen8

Registered
Messages
61
type these into telnet if you want it on usb or hdd

fdisk /dev/sda -then enter

d & enter -keep doing untill no partitions left

n & enter -this will create a new partition on stick

p & enter -to create a primary partition

1 & enter & enter again

w to write changes & save & exit- This should have created a linux partition on your USB stick

mkfs.ext2 /dev/sda1 & enter

mount -t ext2 /dev/sda1 /mnt/usb




ftp your image to mnt/usb



type cd /mnt/usb - enter

tar xvzf PKT.tar.gz (replace PKT.tar.gz with the name of the image you download)


when its done enigma2 will be on the hdd


now you need to setup multiboot. best way is put pkt.gold in flash and use the multiboot config in the plugins. set config 1 to boot from usb - sda1 - enigma2

then restart the box holding No 1 on the remote.

it should then boot.
 
J

jud1255

Registered
Messages
165
fdisk

Ok thanks,
I am halfway through doing the factory reset although it has not gone back to original factory settings STRANGE it is still showing the indb6 image.
I am now scanning services.
When I did previously update to indb6v008 i updated by usb upgrade image from memory stick same as I have done before with other images nlb and dsg then removed usb stick, i never had a problem with hdd.
The image must be on hdd as I removed usb stick after installing.
MAYBE THIS IS WHERE IVE GONE WRONG.
Will advise in a short time whether hdd is now visible and working.
If I end up doing as you say , shall I format the stick fat32 before putting in receiver then do I also have to leave the stick in ?
Thanks jud
 
J

jud1255

Registered
Messages
165
brianmullen8 said:
type these into telnet if you want it on usb or hdd

fdisk /dev/sda -then enter

d & enter -keep doing untill no partitions left

n & enter -this will create a new partition on stick

p & enter -to create a primary partition

1 & enter & enter again

w to write changes & save & exit- This should have created a linux partition on your USB stick

mkfs.ext2 /dev/sda1 & enter

mount -t ext2 /dev/sda1 /mnt/usb




ftp your image to mnt/usb



type cd /mnt/usb - enter

tar xvzf PKT.tar.gz (replace PKT.tar.gz with the name of the image you download)


when its done enigma2 will be on the hdd


now you need to setup multiboot. best way is put pkt.gold in flash and use the multiboot config in the plugins. set config 1 to boot from usb - sda1 - enigma2

then restart the box holding No 1 on the remote.

it should then boot.
Click to expand...
sticking on the 1st hurdle
d&enter , its not showing any partitions.
in telnett
drive
i tick usb & hdd
usb as
which do i select ?
disc or part1
ive just now trying the format button but already looks to be froze/hanging
 
J

jud1255

Registered
Messages
165
brianmullen8 said:
type these into telnet if you want it on usb or hdd

fdisk /dev/sda -then enter

d & enter -keep doing untill no partitions left

n & enter -this will create a new partition on stick

p & enter -to create a primary partition

1 & enter & enter again

w to write changes & save & exit- This should have created a linux partition on your USB stick

mkfs.ext2 /dev/sda1 & enter

mount -t ext2 /dev/sda1 /mnt/usb




ftp your image to mnt/usb



type cd /mnt/usb - enter

tar xvzf PKT.tar.gz (replace PKT.tar.gz with the name of the image you download)


when its done enigma2 will be on the hdd


now you need to setup multiboot. best way is put pkt.gold in flash and use the multiboot config in the plugins. set config 1 to boot from usb - sda1 - enigma2

then restart the box holding No 1 on the remote.

it should then boot.
Click to expand...
This is wat I get after
Fdisk /dev/sda then enter


The number of cylinders for this disk is set to 19457
There is nothing wrong with that, but this is larger than 1024,and could in certain setups cause problems with :
1 software that runs at boot time eg old versions of lilo
2 booting and partitioning software from other os’s
Eg dos fdisk os/2 fdisk
 
B

brianmullen8

Registered
Messages
61
just press d to delete any partitions
it might say you have none if you have already deleted them

then just press n to create a new partition.
 
You must log in or register to reply here.
Top