iptv streams for powervu

Wish I could. I have similar problem. If I figure mine out I'll post solution. I keep reading and experimenting so one of these days hopefully...

Channel Config:
1. Go to the OpenWebif and click on the "Stream" button for the channel you want to add.
2. Download and save the .m3u file.
3. Open the .m3u file with a text edior and get the stream link. It looks like this:
http://stb:8001/1:0:19:0123:3EF:1:C00000:0:0:0:
4. Replace the port (8001) with the relay port (default: 17999) and the host name ("stb") with 127.0.0.1
http://127.0.0.1:17999/1:0:19:0123:3EF:1:C00000:0:0:0:
5. Add the new stream link to your channel list (for example with DreamBoxEdit)

IMPORTANT:
Do NOT use the correct Transponder ID/Network ID/Namespace for the stream link.

Use Transponder ID: "11",
Network ID: "22"
and Namespace: "33".
Set Service Type to "1",
and enter the correct Service ID for the channel.

Note:
When using DreamBoxEdit:

A. Go to the list in the middle "Bouquet details".
B. Right click on a channel, select "IPTV and other streaming services", select "Add".
C. Select "DVB/TS".
D. Chosse a name and use the new stream link as URL.
E. Use the "Service ID" of the original channel. You can find it in the left list ("Services")


READ AND UNDERSTAND THIS


MAKE NEW Bouquet AND GIVE IT A NAME IE POWERVU
AND ADD YOUR POWERVU STREAMS TO IT

a sample

Is there a way to play a IPtv stream without turning off the LNBF voltage?

well, i found one way, i start a record on a channel with the right voltage, and then change to the IPTV. That keeps the LNBF voltage on.

But, there has got to be a better way...