Method of Opening PowerVu Channels in Enigma2 Using Oscam

Hi everyone.
I have use setting that Lexzie descrive in post 1178.
Lexzie Can you upload files. the oscam file that you use and all the other files.
I current use a vu Duo2 and nothing works with that config.

Tanks.

Current config:
Vu+Duo2 openattv 6.1
oscam ymod for bbc 27.5w

I know but only use oscam ymod for bbc nothing else.

Juli13 but can't config oscam to use powervu correctly.

Can you or others send me file or config. In the past in openatv 5.0 it was ok. I open 9.0E channels with powervu configs.

Anyone here can share a working streamrelay channels list for 0.8W and 4.8E ?

here is the userbouquet for powervu
with dreamboxedit

Garglo said:

I have the same Octagon SF4008 receiver. I am familiar with Oscam but interested in IS-19 166.0E C-Band PowerVu Channels. Can someone help out with Oscam files that work as I'm sending an image to an aged friend (Not technical) who has the large C-Band dish. I only have Ku Band here where I live. Thanks

Click to expand...

Like Garglo, I also have an Octagon SF4008 and am looking for OSCAM files which work on this box with ARM chip (which means no stream relay needed?).
My image is OpenAtv6.1
Please help.
Thankx

ketupa said:

Like Garglo, I also have an Octagon SF4008 and am looking for OSCAM files which work on this box with ARM chip (which means no stream relay needed?).
My image is OpenAtv6.1
Please help.
Thankx

Click to expand...

Nobody to help me ?
I a trying for days now with the instructions on the first 3 pages of this thread, with no result. My box is Octagon SF4008 (aRM chip) and my image OpenAtv 6.1.
Is there someone who ever managed to open the PV channels with this configuration?
Thanks a lot.

Ketupa you Can use cam panel/ cam manager

download softcamfeed
unzip -> copy ftp to tmp -> blue button -> select ipk installer under extensions -> ok -> in the new window -> select ipk / tmp sofcamfeed ipk -> ok -> green button installed -> if install ok -> exit
next step -> press green -> press green -> softcam -> select oscam emu -> install -> done
box restart
next step -> red button -> infopanel -> softcampanel press -> select cam 1 select oscam -> green button -> oscam is started -> exit
next step -> webif at the pc with your ip the box: 8080
-> config

Rickk said:

download softcamfeed
unzip -> copy ftp to tmp -> blue button -> select ipk installer under extensions -> ok -> in the new window -> select ipk / tmp sofcamfeed ipk -> ok -> green button installed -> if install ok -> exit
next step -> press green -> press green -> softcam -> select oscam emu -> install -> done
box restart
next step -> red button -> infopanel -> softcampanel press -> select cam 1 select oscam -> green button -> oscam is started -> exit
next step -> webif at the pc with your ip the box: 8080
-> config

Click to expand...

Thanks for your reply. All this I already know. I think the problem is to choose the right soft cam version. Oscam or Oscam emu, and which version ?
Then to have the right config.
Do you have a config running right now for the PV channels ? And can you share it ?

You need oscam emu for arm.

ketupa said:

Thanks for your reply. All this I already know. I think the problem is to choose the right soft cam version. Oscam or Oscam emu, and which version ?
Then to have the right config.
Do you have a config running right now for the PV channels ? And can you share it ?

Click to expand...

now replace the oscam emu with this version
http://www.sat-universe.com/showthread.php?t=297567&page=2

oscam server:

[reader]
label = emulator
protocol = emu
device = emulator
caid = 090F,0500,0604,0E00,1010,2600,FFFF
detect = cd
ident = 090F:000000;0500:000000,030B00,023800,021110,007400,007800;0604:000000;0E00:000000;1010:000000;FFFF:000000;0100:000000
group = 1
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;0500:023800;050000040;0500:030B00

Click to expand...

oscam config:

[streamrelay]
stream_ecm_delay = 800
stream_relay_enabled = 1
stream_emm_enabled = 1

[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
delayer = 60
user = dvbapi
read_sdt = 1
extended_cw_api = 2
boxtype = dreambox

Click to expand...

Thanks Rickk. I have not access to my box at this moment. Ik will try tomorrow.

Rickk said:

now replace the oscam emu with this version
http://www.sat-universe.com/showthread.php?t=297567&page=2

oscam server:

oscam config:

Click to expand...

I am not sure I understand. Do I need 2 excitable files (oscam and oscam_emu, which would be a patch for the main executable) oujust one (ocam_emu as the patched version of the whole thing) ?

How to replace the oscam emu by the new one ? Where to place the file ? Per FTP in user/bin instead of the old one? And then, how to execute the file? (as this is not a ipk)

Due to my numerous trials, il have now a lot of oscam related files on my box. Perhaps I have to delete some ?

I have :

In /etc :
CCcam_2.2.1.emu
Oscam_atv.emu
Oscam_atv_emu.emu

In user/bin :
CCcam_2.2.1
Oscam_atv
Oscam_atv_emu

And, of course, in etc/tuxbox/config the config files.
In ect/enigma2/ the bouquets, lamedb, ...

Sorry for all this questions and thanks for your patience

juli13 said:

Read the tutorial here http://www.sat-universe.com/showthread.php?t=299360

you need only one oscam which is oscam emu file.

Put it in usr/bin and rename it with zour current oscam name.
this is dine because the start script can detect the new oscam.
Also do not forget to give the priority 755, as the tutorial explain to you.

To execute the oscam can use the blu button in softcam manager ( depend from image you use)

Click to expand...

Very useful tutorial. Thanks.
Tomorrow I will try and give feedback.

ketupa said:

Very useful tutorial. Thanks.
Tomorrow I will try and give feedback.

Click to expand...

Hi Rickk and juli 13

I installed OSCAM emu correctly, with the config files you shared with me.
Now, the problem is to match the k**s with the info included in the user bouquets.
Here are some lines of my log. Perhaps you can see what is wrong.
SoftCam.k** is in user/k**s

In userbouquets I have for example :
1:0:1:AF0:B:16:0:0:0:0:http%3a//127.0.0.1%3a17999/1%3a0%3a1%3aAF0%3a2%3a5E%3aE08B00F%3a0%3a0%3a0%3aiscovery Poland HD

2017/08/15 10:54:25 00000000 (emu) Key not found: P 0AF0 01
2017/08/15 10:54:26 3B077845 r (-) -- Skipped 1 duplicated log lines --
2017/08/15 10:54:26 3B077845 r (emu) ECM failed: Key not found
2017/08/15 10:54:26 1C57F6D9 c (ecm) enigma (0E00@000000/0000/0AF0/40:F3E7130A98B03E4B6221B2560892CE30): not found (0 ms) by oscam_emu - Discovery Poland HD
2017/08/15 10:54:26 1C57F6D9 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 0 disabled ecmpids!
2017/08/15 10:54:26 1C57F6D9 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1794 ANY CHID PMTPID 0B4A VPID 0AF0
2017/08/15 10:54:26 00000000 (emu) Key not found: P 0AF0 01
2017/08/15 10:54:27 3B077845 r (-) -- Skipped 1 duplicated log lines --
2017/08/15 10:54:27 3B077845 r (emu) ECM failed: Key not found
2017/08/15 10:54:27 1C57F6D9 c (ecm) enigma (0E00@000000/0000/0AF0/40:9CAE256EA2B0F4E74801F0A7B1816A1A): not found (1 ms) by oscam_emu - Discovery Poland HD
2017/08/15 10:54:27 1C57F6D9 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 0 disabled ecmpids!
2017/08/15 10:54:27 1C57F6D9 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1794 ANY CHID PMTPID 0B4A VPID 0AF0
2017/08/15 10:54:28 00000000 (emu) Key not found: P 0AF0 01

I am now totally lost.
Now I have not any oscam installed and i can't install enigma2-softcam-oscamemu-solo4k_11.390-FOR-OpenATV_all.ipk anymore (box shows : 0 packages installed with 0 errors).
Yesterday, this was the way I managed to have oscam running: I installed the ipk and then replaced the bin with the bin from oscam-svn11390-sh_4-webif-emu.

With no possibility anymore (why ?) to load an ipk via the the folder, I tried via the feed on the box but I am not sure which softcam to choose. Tried oscam_atv and oscam.atv_emu.
But as I go in the softcampanel via the blue taste and I choose one of this and press green to start the sofcam, nothing happens (CAM 1 stays inactive). As I quit the softcampanel with exit and go back to it, CAM 1 shows no soft cam...

I have to admit this is too complicated to me. Strange, because on my old Vu+duo I had oscam running without big problems.

softcam.key
example groupid=0x8(0.8°w), sid=0x0Af0, keys 00 and 01:
P 00080AF0 00 11223344556677
P 00080AF0 01 11223344556677

oscam.atv_emu
new version rename to oscam_atv_emu

restart box

Rickk said:

softcam.key
example groupid=0x8(0.8°w), sid=0x0Af0, keys 00 and 01:
P 00080AF0 00 11223344556677
P 00080AF0 01 11223344556677

oscam.atv_emu
new version rename to oscam_atv_emu

restart box

Click to expand...

I did this, but no success. Still unable to make CAM 1 active from the softcampanel.
Step by step what I did :
- installed oscam_atv_emu 1.2 11209 from the feed via blue button (is the only oscam.atv.menu version I have on the feed list, but not sure this is a version for ARMV7 boxes)
- replaced oscam_atv_menu bin in user/bin by your juli13 11390 sh_4 bin, renamed it oscam_atv_emu and ch mod 755
-restarted the box (not only the IGU).

Result : when I select oscam_atv_emu in the softcampanel an press on green, CAM 1 stays inactive. When i exit the panel and come back : CAM 1 : no cam.

???