***Loading Enigma 2 using USB stick for Cuberevo/IP Box 9000HD for Newbies***

markybrook

Registered
Messages
136
Point the remote directly at the IR port on front of the receiver and press a number button whilst the box boots. Eg 2. If the message comes up MULTIBOOT 2. Then you have the Multiboot code.
 

harps2299

Registered
Messages
8
Well, reflashed with this image
http://www.sat-universe.com/showthread.php?t=133188

No change unfortunately. Still sticks at MULTIBOOT 2 on startup.

Not sure where to go from here...
download a ghost image mate real easy if you want to change image fxp into ur box and delete everything in usb0 send over tar.gz file to usb0 then telnet to box and enter

cd /mnt/usb/usb0

tar xzf imagename.tar.gz
hit button 2 on remote after reboot
 

calle3

Registered
Messages
53
load E2 image into hdd

can anybody tell my, how to load E2 image into my hdd instead of USB using this guide??

and then?? how to make and change partitons on my hdd. I can see my hdd has sda1 and sda2... I want an sda3 for my multiboot image!!!

how big does the partitions has to be when I want to use sda1 for recordings, and sda2 for swap... my hdd is 250 gb???
 

tcs_fr

Registered
Messages
18
Hi,

Is it possible to edit the boot order ? and what is the default boot if no action is made ?

tcs_fr
 

SHARKERS

Registered
Messages
12
Still cant get this to work. Tried different USB drives also in various formats - ie FAT32,EXT2,EXT3. Ive used it on a Linux machine and also a Vista. It just hangs at Multiboot 2.

Tried each image below
NLB DGS_based r. 11577 rc
PGI 5.0 Gigan Edition DGS_based r. 11577
Sifteam DGS_based r. 11673

All images it mounts correctly

Ive wasted 3 whole days on it at the wifes disgust,lol

Really want the box to throw an error code my way

Going to buy a null modem and serial over the boot menu next

Stu
 

catseye

Registered
Messages
394
Stu

Boot your DGS image first -then shove usb stick in back

& follow steps to load usb enigma2 in 1st post

Then when stick is formated (following instructions in first post) pull it out & reboot dgs image

Reinstall usb stick once dgs reloaded & ftp usb file to stick

Then follow instructions to telnet etc, sync & enter etc

Hard reboot with stick in box, hold finger on button required on r/c once booting message appears
 

Jahu

Donating Member
Messages
254
Swap shouldn't be more then 2gb. I have yet to see my 9000 swap anything. I have swap on a USB stick. Having the Image and the swap on HDD spin constantly is not a good idea in such a poorly ventilated box.
 

tcs_fr

Registered
Messages
18
Still cant get this to work. Tried different USB drives also in various formats - ie FAT32,EXT2,EXT3. Ive used it on a Linux machine and also a Vista. It just hangs at Multiboot 2.

Tried each image below
NLB DGS_based r. 11577 rc
PGI 5.0 Gigan Edition DGS_based r. 11577
Sifteam DGS_based r. 11673

All images it mounts correctly

Ive wasted 3 whole days on it at the wifes disgust,lol

Really want the box to throw an error code my way

Going to buy a null modem and serial over the boot menu next

Stu

Stu

Boot your DGS image first -then shove usb stick in back

& follow steps to load usb enigma2 in 1st post

Then when stick is formated (following instructions in first post) pull it out & reboot dgs image

Reinstall usb stick once dgs reloaded & ftp usb file to stick

Then follow instructions to telnet etc, sync & enter etc

Hard reboot with stick in box, hold finger on button required on r/c once booting message appears

I have the same problem.
When I try to boot on usb with the R/C, the box hangs on "enigma-sdb" display. Then even if I wait 10 minutes nothing happens.

Does anybody have a clue ? Is it because I use a DVB-C cable tuner ?
 

mred

Registered
Messages
56
Are you trying to load Enigma on the usb or a DGS file.
I have a DGS version in flash & enigma on usb also a dvb-c tuner
which works fine
Make sure its a tar file you are trying to decompress &
don't forget to type sync after the tar file has decompressed
 

tcs_fr

Registered
Messages
18
I'm trying to use the enigma on the usb.
I used the "enigma setupe installation utility v1.3.5".

I'll try to install the enigma image manually.

What does the sync does ?
 

mred

Registered
Messages
56
I have only used the manual setup as described above & elsewhere & works ok
As for the command sync just google for linux commands
 

tcs_fr

Registered
Messages
18
I have only used the manual setup as described above & elsewhere & works ok
As for the command sync just google for linux commands
I tried last night, but it still doesn't work.
Is it possible to flash the cuberevo with flash tool 1.0.2 like with DGS images ?
 

badeyeah

Registered
Messages
92
I tried last night, but it still doesn't work.
Is it possible to flash the cuberevo with flash tool 1.0.2 like with DGS images ?

I've tried PGI and Sifteam these won't boot E2 on USB (properly).
Probably the NLB in flash too.

What has been told is that the DGS image in flash, will boot E2 on USB.So you ca try it,mine works OK.
 
Top