"Invalid ecm type for card" on 0604 card

Lexzie

Registered
Messages
128
Hi everyone,

I'm trying to get a Irdeto 0604 card (ZETA card from DELTA, a dutch cable company) working in OScam.
Using a Xtrend ET9500, card only works on Smartreader (USB).

Card is detected, entitlements are read and okay.
Still no encryption and message:
Code:
(ecm) dvbapiau (0604@000000/0064/0BBA/4C:ECC9929CFE1B95ADB0458C9FE3069A45): rejected  (144 ms) by DELTA - 24Kitchen HD (Invalid ecm type for card)

Chid 0064 is available on the card (basic package).
rsa- and boxkeys are valid (as far as I know, they work on another 0604 card from the same provider).

Reader config:
Code:
[reader]
label                         = DELTA
protocol                      = smartreader
device                        = 002:003
boxkey                        = 1122334455667788
rsakey                        = 3C8633AAC0D367533DEC7BB2EEEDEB8CA3ADA52E58B99BB34672783277A1DAAC3B6106AD0909774E031B2A6E30195B437683AD0FC599B87D08CEA47BE1B6C76A
force_irdeto                  = 1
detect                        = cd
mhz                           = 600
cardmhz                       = 600

What could be wrong on this card?
 

kisanth

Registered
Messages
1
Did you update the card in an official CAM module?
I'm seeing the same error (After running without problems for months) and the only way to get the card working is to leave it in the CAM module in one of my TV's overnight.
After that it's good for a few weeks and then I have to do the same trick again.
I now have two cards that I swap every week.
 
Top