How Fix error NO: NO CA Found in dreambox 800HD se

satamuse

Registered
Messages
322
800 HD pvr sim1

Thank you guys, tried everything but no luck. my box is old HD 800 PVR SIM1.
hi
yes....but you must use an image corresponding to the name (a8p? ferrarri? estar ?)of your sim
try to use "optiflasher"
regards
 

satamuse

Registered
Messages
322
how to

Do I have to connect my computer to the router or can I just have it like this (wireless) :p
hi
you must use le little cable with 1 little usb on one side
and a normal usb on the other side
the little side in the receiver
the normal side in the PC
regards
 

gianload

Registered
Messages
1
r01.....

Sorry the firsth metod with my dm800se clone not work,yes appare flash i put the firmware but still waithing cheksum many time so i dont know what do,pls help me
 

Ferret

Marching On Together !
Staff member
Administrator
Messages
17,480
Sorry the firsth metod with my dm800se clone not work,yes appare flash i put the firmware but still waithing cheksum many time so i dont know what do,pls help me

Use japher flasher with ethernet and service cable attached.

Japher is a patched version of DreamUP very easy to use.
 

Galeyr

Registered
Messages
1
Plz help me

please help me i have error No CA Found

-DM800se
-Clone
-SIM2.10
-No Ca Found After Flash image[/QUOTE]
I don't know how to fix it if u could help me to make it work, i would have muchly opprociated
Thankx
 

Ferret

Marching On Together !
Staff member
Administrator
Messages
17,480
please help me i have error No CA Found

-DM800se
-Clone
-SIM2.10
-No Ca Found After Flash image
I don't know how to fix it if u could help me to make it work, i would have muchly opprociated
Thankx[/QUOTE]

Use japhar flasher with network and mini usb connected.

If you have a mini flashup button on the back of your box use that.
 

shimu

Registered
Messages
2
argh... my DM800SE suddenly start hanging at boot-up since yesterday. Flashed latest firmware and got this "No CA found" problem now... will try the tips in this thread *finger crossed. Will update if I can solve it.
 

shimu

Registered
Messages
2
argh... my DM800SE suddenly start hanging at boot-up since yesterday.:mad: Flashed latest firmware and got this "No CA found" problem now... will try the tips in this thread *finger crossed. Will update if I can solve it.
 

Arselona

Registered
Messages
3
This may be helpful to those who have encountered with "NO CA FOUND" message while flashing their clone DM800se V2.2

You need first to forget other software available for flashing. Just let your browser (chrome, firefox,opera or explorer) do the charm

And this is how you should go about
1. Have mini usb and ethernet cables in place
2. Determine the boot loader version of your box
3.Have a rooter in place
4. Determine the SIM version of your box
5. Download the image compatible with the bootloader of your box

Now lets do the magic
1.Use the ethernet cable to connect your box to the router
2. use the mini usb cable to connect your box to your computer via usb port
3. connect your box to the power source (and dont put on the power button)
4. Connect your computer to thesame router via ethernet cable or wifi
5. Open either of the browser i have written ubove
6. Press and hold the flashup button behind your box
7. While doing the procedure no.5 put on the power button
8. Remove your finger on the flashup botton when you IP address on the lcd of your box
9. Copy the IP address to your browser and clirk enter key
10. Select firmware update from your brown
11. browse to the area in your computer where you save the image you downloaded
12. Click flash and wait for the magic to occur
13. When the flashing finishes do no opt for automatic reboot.
14. Power off you box for 30 seconds and power on your box to allow it to reboot
15. Your box will be restored.
Enjoy again the magic of dreambox

NB: for mates with dm800se v2.2 ssl#88acan follow the link to download the image (choose openpli 4.0 and yuo willbe directed to the latest image)https://mega.nz/#F!E1QShIyZ!JHze-4OBmTJ81-kTKiCMZg
 
Last edited:

satamuse

Registered
Messages
322
boot missing !!

This may be helpful to those who have encountered with "NO CA FOUND" message while flashing their clone DM800se V2.2

You need first to forget other software available for flashing. Just let your browser (chrome, firefox,opera or explorer) do the charm

And this is how you should go about
1. Have mini usb and ethernet cables in place
2. Determine the boot loader version of your box
3.Have a rooter in place
4. Determine the SIM version of your box
5. Download the image compatible with the bootloader of your box

Now lets do the magic
1.Use the ethernet cable to connect your box to the router
2. use the mini usb cable to connect your box to your computer via usb port
3. connect your box to the power source (and dont put on the power button)
4. Connect your computer to thesame router via ethernet cable or wifi
5. Open either of the browser i have written ubove
6. Press and hold the flashup button behind your box
7. While doing the procedure no.5 put on the power button
8. Remove your finger on the flashup botton when you IP address on the lcd of your box
9. Copy the IP address to your browser and clirk enter key
10. Select firmware update from your brown
11. browse to the area in your computer where you save the image you downloaded
12. Click flash and wait for the magic to occur
13. When the flashing finishes do no opt for automatic reboot.
14. Power off you box for 30 seconds and power on your box to allow it to reboot
15. Your box will be restored.
Enjoy again the magic of dreambox

NB: for mates with dm800se v2.2 ssl#88acan follow the link to download the image (choose openpli 4.0 and yuo willbe directed to the latest image)https://mega.nz/#F!E1QShIyZ!JHze-4OBmTJ81-kTKiCMZg
i do not agree because when in "ca no found" you will need the good "loader" and usually owners does not know the kind and version of the boot !!!!!!!!!!!
you MUST use "Use JapharFlasher to recover your box"
and then , no problem for the boot !!!!!!!!!!!!!!
regards
the link for the soft here Under is for 800 VERSION 2 !!!!!!!!!!!!
 
Last edited:

Arselona

Registered
Messages
3
i do not agree because when in "ca no found" you will need the good "loader" and usually owners does not know the kind and version of the boot !!!!!!!!!!!
you MUST use "Use JapharFlasher to recover your box"
and then , no problem for the boot !!!!!!!!!!!!!!
regards
the link for the soft here Under is for 800 VERSION 2 !!!!!!!!!!!!

Mate that was how i did to my clone dm800se v2.2 ssl88a. I did nothing other than this. Seeing is believing. I have seen and therefore i now believe the a thing you believe imposible
 

satamuse

Registered
Messages
322
ssl

Mate that was how i did to my clone dm800se v2.2 ssl88a. I did nothing other than this. Seeing is believing. I have seen and therefore i now believe the a thing you believe imposible
that's ok
i believe in your method BUT
when you get a "ca no found " you loose your ssl = boot !!!!!
you should explain to the people how and where they will find the good ssl boot !!!!!
that is the question !
regards
 

toysoft

Member
Messages
1,828
With some boxes there is a button on the back, that button loads in memory the internal SSL, BUT that SSL is defined for the Sim that was in the box at the moment of the sale/delivery/production/manufacturing...

So if you changed your Sim after, then this method will NOT work. There is this in some boxes (not all !), it's in estar, sim2 and A8P clone boxes. So you have 1 chance on 3 (for DM800HDse V1) to have the right sim/ssl. For DM800HDseV2 only Sim2 with Sim 2.20 and Japhar with Japhar Sim have a solution/ssl/images.

I completely agree with satamuse that the only Universal way to recover any DM box is definitely only JapharFlasher as it works with ALL sims. Then knowing the sim in the box, you can flash the correct software/SSL. The button solution will work only on specific cases (no change of sim, right sim vs the ssl in the ROM etc).

TS

that's ok
i believe in your method BUT
when you get a "ca no found " you loose your ssl = boot !!!!!
you should explain to the people how and where they will find the good ssl boot !!!!!
that is the question !
regards
 
Top