Dreambox 500s flash prb.

mukhtiyar

Registered User
Messages
595
First i use plijade3 image on my box its run but the colour gone after some time.i want to flash it with dream up loader but an error comed that

8:22:30 AM box type: DM500
8:22:49 AM Ping result: OK, box is alive and speaking to us ;-)


8:22:30 AM box type: DM500
8:22:49 AM Ping result: OK, box is alive and speaking to us ;-)
8:23:42 AM Uploading file to box...
8:23:50 AM ERROR , upload aborted!


i try dream up loader these versions 1.3.3.2

1.3.3.4

1.3.3.5

And also 1.3.3.7 last version also but still same problem.

Also try with flashWizard pro but nothing it cannot connect.

Any solution?
 

unieno

Registered
Messages
3,530
Possible the causes and need recheck :
- Dreambox itself.
- PC problem.(port,connection,OS)
- Image.(corrupt image file)
- Null modem.
Good luck.
 

mukhtiyar

Registered User
Messages
595
Thanks m8 for reply but in my point of view its dead!
Any other friend face the same issue?
Reguard's
 

mukhtiyar

Registered User
Messages
595
Possible the causes and need recheck :
- Dreambox itself.
- PC problem.(port,connection,OS)
- Image.(corrupt image file)
- Null modem.
Good luck.

Thanks alot my friend.my box working again.the problem is solved by erazing the box.And its heat up dm problem also i think cos'after 2 days my dm kept in store scrap.this is my last try and am very lucky to see my box live again.

if you have that prb.for 48 hours donot power on your stb.After that you dream up loader 1.3.3.2 and with eraze file and your problem will solve.
 

davidfutre10

Registered
Messages
2
Hi I am having exactly the same problem. I have waited 24 hours but still aborting after a few seconds. I will wait a bit longer (+48 hours) and try again. Thanks
 

davidfutre10

Registered
Messages
2
DM500 S working again. I couldn't wait 48 hours...even 20 minutes ;) I used DreamUP DM500s v2.18a with a lot of patience as it takes too too long to perform every step
 
Top