Latest Version of OScam (both, UMP & SB)
- Thread starter elgeneral
- Start date
Oscam svn 519 Sky It OK
Not tested.
Not tested.
Code:
Ok guys, it seems we have solved it now.
Current version rev 519 gives picture now for a few hours.
Zodac is right about people claiming that "no countermeasures" are sent,
the postprocessing is still active. The patch is sent yesterday evening was
just not tested yesterday evening, everybody was concentrating on
autooffset patch...
Also on my setup no EMM's are necessary. We are going to test on a "fresh"
card soon to check whether this card needs some special EMM or not.
Enjoy & many thanks to the guys from an Italian forum,
because they did the really hard work!!!!
example how to config for sky it working
Put the 3 files:
oscam.conf
oscam.user
oscam.server
in /var/tuxbox/config (e1) or etc/tuxbox/config (e2)
oscam.conf
[global]
nice = -1
WaitForCards = 1
[monitor]
port = 988
aulow = 120
monlevel = 0
[newcamd]
key = 0102030405060708091011121314
port = 34000@093b:000000
oscam.server
[reader]
Label = SkyItalia
Protocol = Intern
Detect = CD
Device = /dev/sci0
group = 1
CAID = 093b
BoxID = ###### (your Boxkey)
#savenano = all
Customspeed = 0
EMMCache = 1,3,2
Fallback = 0
#blockua = 0
#blockga = 0
#blocksa = 0
#AU = 1
#Enable = 1
oscam.user
[account]
user = user
pwd = pass
group = 1
uniq = 1
caid = 093b
ident = 093b:000000
AU = SkyItalia
monlevel = 0
CCcam.cfg
N: 127.0.0.1 34000 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256OScam for Enigma 2
Not tested by me ...
Erstmal Danke an alle die mitgewirkt haben!!!!!!!
NUR ENIGMA 1 testet in DM500s (Clone)
Install:
1. oscam-dbox.ppc in var/bin chmod 755
2. Dann alle Config dateien in var/tuxbox/config
3. in der oscam.server eure boxid eingeben dann wieder in var/tuxbox/config speichern
4. in der CCcam.cfg eine N-Line erstellen mit folgender Line
N: 127.0.0.1 34000 dream box 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D
und dann in var/etc speichern
5. Starte über Telnet die oscam-dbox.ppc -d63
6. Starte danach über Blue Panel CCcam_2.1.3
7. Es werde hell
Mfg Italia19311
DANKE nochmal an alle !!!!!!!!!!!!!!!!!
First of thanks to all who participated !!!!!!!
ONLY Enigma 1 funcion DM500S (Clone)
Install:
1. OSCAM-dbox.ppc in var / bin chmod 755
2. Then all the config files in var / tuxbox / config
3. Enter BoxID in oscam.server then save your config again in var / tuxbox /
4. in CCcam.cfg an N-line to create the following line
N: 127.0.0.1 34000 dream box 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D
and then save it in var / etc
5. Start the Telnet OSCAM-dbox.ppc-d63
6. Start, then via Blue Panel CCcam_2.1.3
7. Let there be light
Mfg. Italia19311
THANKS again to all !!!!!!!!!!!!!!!!!
OSCAM install ok. But as I use it with CCcam? In CCcam.cfg ce wrote:
N: 127.0.0.1 34000 Dream Box 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D
# N: 127.0.0.1 13000 Dream1 box1 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D
so I have to leave everything and then put my things in CCcam.cfg? Then the F Line etc..
Not tested by me ...
Erstmal Danke an alle die mitgewirkt haben!!!!!!!
NUR ENIGMA 1 testet in DM500s (Clone)
Install:
1. oscam-dbox.ppc in var/bin chmod 755
2. Dann alle Config dateien in var/tuxbox/config
3. in der oscam.server eure boxid eingeben dann wieder in var/tuxbox/config speichern
4. in der CCcam.cfg eine N-Line erstellen mit folgender Line
N: 127.0.0.1 34000 dream box 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D
und dann in var/etc speichern
5. Starte über Telnet die oscam-dbox.ppc -d63
6. Starte danach über Blue Panel CCcam_2.1.3
7. Es werde hell
Mfg Italia19311
DANKE nochmal an alle !!!!!!!!!!!!!!!!!
First of thanks to all who participated !!!!!!!
ONLY Enigma 1 funcion DM500S (Clone)
Install:
1. OSCAM-dbox.ppc in var / bin chmod 755
2. Then all the config files in var / tuxbox / config
3. Enter BoxID in oscam.server then save your config again in var / tuxbox /
4. in CCcam.cfg an N-line to create the following line
N: 127.0.0.1 34000 dream box 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D
and then save it in var / etc
5. Start the Telnet OSCAM-dbox.ppc-d63
6. Start, then via Blue Panel CCcam_2.1.3
7. Let there be light
Mfg. Italia19311
THANKS again to all !!!!!!!!!!!!!!!!!
OSCAM install ok. But as I use it with CCcam? In CCcam.cfg ce wrote:
N: 127.0.0.1 34000 Dream Box 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D
# N: 127.0.0.1 13000 Dream1 box1 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D
so I have to leave everything and then put my things in CCcam.cfg? Then the F Line etc..
Last edited:
