Method of Opening PowerVu Channels in Enigma2 Using Oscam

Ghouri

Registered
Messages
154
Mates,
It is very encouraging news that due to latest changes, Oscam Emu now support opening of PowerVu channels in Enigma2 through "Stream Relay method". Everything happens inside the STB, no PC required. Enigma2 streams to oscam-emu, and oscam-emu streams back to Enigma-2. All on the STB. You can watch on Enigma2 directly. You can add the stream URL to your channel list, and directly watch on the E2. So, the stream relay needs a fast CPU. For example, CPU usage on VU+ Duo2 for SD Channel 5% & for HD Channel is 15%. Not every STB is fast enough. So only those receivers will be suitable which have powerfull CPUs, like Vu+ Solo2, Duo2 or Dreambox DM800SE V2 etc.
Here are details of the procedure with the links of new Oscam Emu for Dreambox and Vu+ Enigma2 Images (OE 1.6, OE 2.0 & Pli versions):
Latest - oscam_1.20-rev-10886 oe1.6 - 2.0 -Pli -4.0
Oscam Config Files:
https://drive.google.com/file/d/0BxND9JnDok97UXlEY0o4RUxOdHM/view?usp=sharing

.
How to do settings for PowerVU:
Keys are put into SoftCam.Key, which is placed inside the same folder oscam.conf is (for example /etc/tuxbox/config).
Key format in SoftCam.Key:
P <srvid> <nb> <key>
P 1234 01 11223344556677
Note:
- For best performance, the "Include ECM in http streams" setting must be enabled. If your image supports it (openpli, openatv), you can find it here: OpenWebif -> Settings -> Customize
- If the setting is not available, you may need to adjust the "ECM fix delay" setting in oscam webif (Config -> Stream Relay). Increase/Lower it until there is no stuttering.
- When using VU+ devices, make sure to use the latest drivers (June 2015), if you encounter any problems.
Channel Config:
1. Go to the OpenWebif and click on the "Stream" button for the channel you want to add.
2. Download and save the .m3u file.
3. Open the .m3u file with a text edior and get the stream link. It looks like this:
http://stb:8001/1:0:19:1234:3EF:1:C00000:0:0:0:
4. Replace the port (8001) with the relay port (default: 17999)
http://stb:17999/1:0:19:1234:3EF:1:C00000:0:0:0:
5. Add the new stream link to your channel list (for example with DreamBoxEdit)
Note:
- When using DreamBoxEdit:
- A. Go to the list in the middle pane "TV User Bouquet details".
- B. Right click on a channel, select "IPTV and other streaming services", select "Add".
- C. Select "DVB/TS".
- D. Chosse a name and use the new stream link as URL.
- E. Use the "Service ID" of the original channel. You can find it in the left list ("Services").
But I have not tested it yet for two reasons:
1. At the moment away from my satellite system.
2. I have Dreambox DM800 HD PVR which has a slower CPU (333 MHz).
 

JimBizkit

Registered
Messages
128
The README has been updated.

PowerVU config
==============

Keys in SoftCam.Key:
P <srvid> <nb> <key>
example:
P 1234 01 11223344556677

AU keys:
P <srvid> <UA> <key>
example:
P 1234 11223344 11223344556677

For PowerVU the Stream Relay must be used:

IMPORTANT:
The stream relay needs a fast CPU. Not every STB is fast enough.
If you cannot fix stuttering with the following guide, likely your CPU is
too slow.

For best performance, the "Include ECM in http streams" setting must be enabled.
If your image supports it (openpli, openatv), you can find it here:
OpenWebif -> Settings -> Customize

If the setting is not available, you may need to adjust the "ECM fix delay"
setting in oscam webif (Config -> Stream Relay).
Increase/Lower it until there is no stuttering.

When using VU+ devices, make sure to use the latest drivers (June 2015), if
you encounter any problems.

Channel Config:
1. Go to the OpenWebif and click on the "Stream" button for the channel you want to add.
2. Download and save the .m3u file.
3. Open the .m3u file with a text edior and get the stream link. It looks like this:
http://stb:8001/1:0:19:0123:3EF:1:C00000:0:0:0:
4. Replace the port (8001) with the relay port (default: 17999) and the host name ("stb") with 127.0.0.1
http://127.0.0.1:17999/1:0:19:0123:3EF:1:C00000:0:0:0:
5. Add the new stream link to your channel list (for example with DreamBoxEdit)

IMPORTANT:
Do NOT use the correct Transponder ID/Network ID/Namespace for the stream link.
Use Transponder ID: "11", Network ID: "22" and Namespace: "33".
Set Service Type to "1", and enter the correct Service ID for the channel.

Note:
When using DreamBoxEdit:

A. Go to the list in the middle "Bouquet details".
B. Right click on a channel, select "IPTV and other streaming services", select "Add".
C. Select "DVB/TS".
D. Chosse a name and use the new stream link as URL.
E. Use the "Service ID" of the original channel. You can find it in the left list ("Services")
 

drhans

Registered
Messages
116
It's not working on Vu+ Solo2 OpenATV 5 image (from end of June). Just black screen, although oscam seems to decode the channles.
By the way, the binary as well as config from this thread are useless.
 

kalehrl

Registered
Messages
147
I compiled my own oscam-emu and pv works just fine.
Just make sure you enter decimal values in ServiceId field in DreamboxEdit.
In keys, hex value must be entered.
 

kalehrl

Registered
Messages
147
Since I get a lot of pm messages, here is my oscam compiled with oscam-emu patch for mipsel together with config files and SoftCam.Key with Discovery keys on 1W and a PowerVu bouquet in favorites in Thor 1W section:
https://mega.co.nz/#!pwA1WaYA!oepFbWJLBjtqlXonzfqQxfrYEL4GuHQxdjTO36SCUgI
Beware that this binary is very minimal with only modules required for emulation so it's not suitable for regular card sharing.
Also, use dreamboxedit for channel list NOT dreamset.
Cheers!
 
Last edited:

manufact

Registered
Messages
177
sometimes its working for me sometimes not when i ZAP on the channels

openatv 4.2 / vu+ solo2 SE


testing AFN channels on 9°E
 

kalehrl

Registered
Messages
147
Reduce the Oscam - Config -> Stream Relay to 500 instead of the default 700. This will eliminate the stutter, at least in my case.
 

dxdy

VIP
Messages
669
not working for me

Unix starttime: 1436537741
Starttime: 10.07.2015 16:15:41
Version: oscam-1.20-unstable_svn-r10888
Compiler: mipsel-newnigma2-linux-gnu
Box type: vuduo2 (generic)
TempDir: /tmp/.oscam
ConfigDir: /etc/tuxbox/config/
WebifPort: 16004


in live log get bunch of this messages:


2015/07/10 16:18:29 43E1CEF7 c (dvbapi) socket connect error (errno=2 No such file or directory)
2015/07/10 16:18:29 43E1CEF7 c (dvbapi) PMT6: Trying connect to enigma CA PMT listen socket...
 

boyet05

Registered
Messages
245
its working on me at first I have video but no sound. I rebooted my dreambox and this is the log with no video:

2015/07/10 16:30:36 59B73E41 c (ecm) localuser (0E00@000000/0000/005B/40:2CA1F243C2BA3BDB2AE27ECEC7FFBB24): found (4 ms) by emulator
2015/07/10 16:30:37 59B73E41 c (ecm) localuser (0E00@000000/0000/005B/40:81E2EB7E99FE8806FD204D08AC2D32C3): found (2 ms) by emulator
2015/07/10 16:30:38 59B73E41 c (ecm) localuser (0E00@000000/0000/005B/40:F427C82614A5A494E203096ECB820693): found (12 ms) by emulator
2015/07/10 16:30:39 59B73E41 c (ecm) localuser (0E00@000000/0000/005B/40:7FA9895559557978D112A06A70E48DA4): found (6 ms) by emulator
2015/07/10 16:30:39 59B73E41 c (dvbapi) PMT6: Trying connect to enigma CA PMT listen socket...
2015/07/10 16:30:39 59B73E41 c (dvbapi) PMT6 CA PMT Server connected on fd 6!
 

dxdy

VIP
Messages
669
yes use your list uploaded with Dremboxedit (always use him)

did i need do change in camscript ch file??? or maybe to install other oscam and put oscam file in bin?
 

kalehrl

Registered
Messages
147
Use my oscam binary included in the package and put it in /usr/bin or wherever you're supposed to put it in your image. What images are you using? I use openpli and pmt_mode = 6 works best there. Try erasing:
Code:
pmt_mode                      = 6
line from oscam.conf and restarting oscam.
 
Top