Latest - SmartDVB

rama11

Feed Hunter
Messages
16,310
SmartDVB 0.4.0 Beta2


v0.4.0 beta 2 test
added: smartexec /channel option saves currently selected channel (satid,nid,tid,sid) to channel.dat in the settings folder.
fixed: lag issue which could occur with skystar devices (skystar.dev).
fixed: bda.dev crash which could occur when switching to/from direct tune mode.
fixed: skystar HD Express should now also work with skystar WDM device (skystar.dev), should be a better option for owners of such devices compared to the buggy
bda implementation technisat provides.
fixed: transcode parameters were not saved correct/used at the transcode settings dialog.
fixed: video status bar would not update EPG progress/textual data correctly at all times, should work better now.
fixed: skystar.dev signal stats were not being shown correct (quality/level were shown as being the same).
fixed: edit filter should be maintained between channel tab switches.
added: HTTP stream option to stream radio station with MP3. (TV stations should also send the audio only through this http url).
added: basic transcode profile settings to allow for easier change/selected of different streaming/recording parameter sets. Seemed like a necessity to add
this to the current external ffmpeg transcode setup. Profiles are saved to settings/transcode.ini
fixed: scan update dialog lost channels are now sorted by frequency.
fixed: some issues with transport stream transcoded recordings (mp4/mkv).
added: remote ch# selection should also move epg to the selected remote tab channel.
fixed: channel list tv filter would not be retained across application instances.
fixed: adding a blindscan range now uses correct c-band defaults
fixed: client mode now also takes extra buffering into account when receiving streams (if set it’s used for client side receive buffering).
fixed: some transcode profile interface inconsistencies.
added: ability to hide video status (main menu > view)
added: optional extra video status line showing video/audio type and simple record progress.
added: video process to connection settings dialog. This allows you to enter a filter like for example ‘ffdshow raw filter’ to process video.
added: alternate video decoder, based on name selection for now, if you have other suggestions please let me know. You can use this to for example select
a different decoder for HD compared to H.264 (by entering a name like ‘ HD’ or alike).
added: seperate h.264 ffmpeg record transcode command lines. So you’re able to differentiate between then when recording, on slower systems you H264 transcoding
speed is increased by using preset -superfast where possible. This might decrease recording quality in such cases though, remove it again if you don’t have
issues with the efficiency of these transcoding on your system. Please note that slower systems might simply have problems automagically transcoding some
recording types, if you’re system simply isn’t efficient enough for ffmpeg to transcode in real-time this might be unsolvable besides a quicker cpu.
fixed: HTTP streaming seemed to fail on some XP systems, added HTTP option to optimize http streaming which might allow such XP systems to stream correctly when enabled.
modified: HTTP internal caching reworked somewhat to try to make it more stable under various network conditions.
added: renderless video renderer.
modified: some changes to bdas.dev due to reports, some people seem to have some weird exceptions there sometimes.
If you experience worse/sluggish video or lockups at exit please let me know, i might need to revert these changes if it’s not for the better.
added: option to schedule task exit to close the dvb device (experimental might be unstable, /STOPDEV parameter added to smartexec.exe for this purpose).
fixed: some problems with audio process filter being added twice under some settings situations.
fixed: some additional bug report fixes/modifications.
added: basic initial HEVC support. Current known codecs which support HEVC are lentoid/LAV/latest cyberlink. Please note that some of these codecs are still quite
unstable and could result in application exceptions related to these codecs. HEVC is not implemented for PIP atm (seemed like overkill with just 2-4
available and unstable satellite HEVC streams)
fixed: main app status bar did not remain hidden if so requested on restart.

https://dl.dropboxusercontent.com/u/51980102/SmartDVB040Beta2.zip
 

TRIOVI

Registered
Messages
11
SmartDVB 0.4.0 RC

v0.4.0 rc
added: timeout message for scheduled action start (30 seconds default value) added to schedule settings dialog.
modified: record all audio PID's for transport stream recordings moved to record settings dialog and should now also be used for normal manual recordings (previously it only worked for scheduled recordings).
added: chroma subsampling (4:2:0, 4:2:2 etc) to the additional video status, needs testing.
modified: pressing the 'play'/'pause' keys now toggles play/paused state, previously it would remain at the chosen state.
fixed: timeshift pause did not work correctly (introduced bug). Some modifcations to timeshift code with regards to this.
modified: some addons interface calls modified (DoDiseqc doesn't require the full channel data but instead uses the transponder and satellite structures, which is more appropriate not all channel data is needed by this call, this might break existing addons, but since there aren't many yet i figured it wouldn't be much of a problem If you have build an addon you'll need to rebuild with the current addon example headers to be sure)
modified: some setup changes. If you had undefined problems with upgrades previously please try again.
improved: osd timeshift button states (ff/play/pause didn't always update button state correctly).
added: end time to add schedule task dialog (by requests).
improved: smartosd transparency slider settings is more verbose now (seemed unclear to some)
added: EIT event description on the main epg pane is now also shown in the edit field.
modified: by default dvb-t offset settings are not used (too many users seem to have issues with this). Added an option to the scanner dialog to specifically enable offset addition to the currently scanned dvb-t frequency.
improved: EPG ampersand "&" would be incorrectly translated to underscore at some places.
added: blindscanner option to disable retries when no data is received.
added: option to diseqc settings to not show 'positioner moving ...' message when moving a positioner/rotor.
fixed: scanner bugfix where MIS values would not be shown correctly with a sort selected/active.
improved: some modifications to blindscan.dev to enable it to tune dvb-t/c (dvb-t tested).
fixed: bug which could occasionally cause a crash when using the diseqc console.
added: basic RF scanner. Only works with streamreader.dll supported devices so don't try this otherwise won't work. Might be removed for final version if it causes too many issues. Added for testing/feedback.
updated: streamreader.dll to current 1.2.0.1202 version.

https://dl.dropboxusercontent.com/u/51980102/SmartDVB040RC.zip
 
Last edited:

AHMAD ALBAHETH

Registered
Messages
166
Smart DVB 0.4.0 RC updated 2015




fUDYOzK.png



TMJh5f7.png



Hi for all user.
This is a new repack for smart DVB, which the last repack was in 2013.
For that am glad to introduce my new repack for Smart DVB which I hopefully will be
Have every Addon you need with this App
For plugins will be in your AppData folder (local\smart DVB\plugins\)
And all setting.

What is New?
1-OSD SKIN PACK (3D OSD & BLACK OSD)
2-SMART DVB optimize by Ddv122 & ABDULLL
3-DVB Emulator Cam's
A-Vplug updated 30/12/2014 included
Vplug ,Mdplug ,S2-Emu,XME

b- NWemu new version 1.2.8 updated 30/12/2014
5-Plugins for Cccam & Newcamserver
A-ACamd
B-Hadu
6-Plugins for Dongle server all of them in Custom mode
A-Obox3.30
B-AbOx2.7.6 with server work
C-MDBoxPlugin10
7-Plugins for Connected Dongle in Custom mode
A-Dongle_BY_HaTy

With my regard
AHMAD ALBAHETH

Data: 17/1/2015





Download link by torrent (magnet)











 

ViaHussun

Donating Member
Messages
4,097



fUDYOzK.png



TMJh5f7.png



Hi for all user.
This is a new repack for smart DVB, which the last repack was in 2013.
For that am glad to introduce my new repack for Smart DVB which I hopefully will be
Have every Addon you need with this App
For plugins will be in your AppData folder (local\smart DVB\plugins\)
And all setting.

What is New?
1-OSD SKIN PACK (3D OSD & BLACK OSD)
2-SMART DVB optimize by Ddv122 & ABDULLL
3-DVB Emulator Cam's
A-Vplug updated 30/12/2014 included
Vplug ,Mdplug ,S2-Emu,XME

b- NWemu new version 1.2.8 updated 30/12/2014
5-Plugins for Cccam & Newcamserver
A-ACamd
B-Hadu
6-Plugins for Dongle server all of them in Custom mode
A-Obox3.30
B-AbOx2.7.6 with server work
C-MDBoxPlugin10
7-Plugins for Connected Dongle in Custom mode
A-Dongle_BY_HaTy

With my regard
AHMAD ALBAHETH

Data: 17/1/2015





Download link by torrent (magnet)












windows 7 ultimate x64 problem

Ads1310z665566.png
 

1bedu12

Registered
Messages
237
save following with notepad as .bat file and put into folder smartdvb / filters, then run as admin

regsvr32.exe smartavsrc.ax
regsvr32.exe smartdump.ax
regsvr32.exe smartosd.ax
regsvr32.exe stillvideopushsource.ax
regsvr32.exe audiofilter.ax
 

mx3000

Registered
Messages
46
this repack have trOjan

dont install this repack

smartdvb have Official web site and free software for all

What it mean REAPACK
 

AHMAD ALBAHETH

Registered
Messages
166
SmartDVB 0.4.0 RC Final updated 2015



hEjaBv5.png



For all smart DVB user's
The last repacked for smart DVB has some missing folder and file in the installation process,
for that I was reviewed the repack and fixing the issue.
Now the installation folder is setting to be use it for setting & plugins
(C:\Program Files\smartDVB).
Also I had checked the SmartWebIF for working with the App fine.
There was missing folder which use the ffmpeg.exe for steaming, this issue was fixed.
Also the register filters for the App has solved.
The size of repack will be increased from 17 MB to 25 MB.

What is New?
1-OSD SKIN PACK (3D OSD & BLACK OSD)
2-SMART DVB optimize by Ddv122 & ABDULLL
3-DVB Emulator Cam's
A-Vplug updated 30/12/2014 included
Vplug ,Mdplug ,S2-Emu,XME

b- NWemu new version 1.2.8 updated 30/12/2014
5-Plugins for Cccam & Newcamserver
A-ACamd
B-Hadu
6-Plugins for Dongle server all of them in Custom mode
A-Obox3.30
B-AbOx2.7.6 with server work
C-MDBoxPlugin10
7-Plugins for Connected Dongle in Custom mode
A-Dongle_BY_HaTy





the download links and result scan by virus total in

pastebin link













 
Last edited by a moderator:

josagi

Super VIP
Messages
3,052
SmartDVB 0.4.0

Fixed:
Scanner update would mark MIS entries with other ID incorrectly lost
RF scan would not take into account other defined LNB's for the current satellite and incorrect LNB limits might be set also when blindscanning
Some more RF scan fixes/cosmetic issues
Tray icon record state would not always correctly indicate recording on/off
Issue where channel icons would not be shown correctly when SID's were shown in the channellist (only for service name based icons)
Some modifications to bda.dev tbs and autodetection code, might detect specific tbs devices (also tbs 6983) better now (thanks to steven)
Some more fixes to scanner MIS parsing (thanks to alexi)
RF Scanner resource strings added (for translations)
MIS scan scanner (bda.dev) bug which could select the wrong mis when scanning (thanks once more to alexi)
Sometimes a scheduled record would use the wrong EIT entry
Some cosmetic changes to record name defaults
Updated streamreader.dll to 1.2.2.1260
Some minor fixes to the SmartOSD timeshift button toggles (remote now also should toggle between play/pause)
 

AHMAD ALBAHETH

Registered
Messages
166
SmartDVB 0.4.0.12 Release (final updated) 2015



bS1S4pi.png





My friend’s
This is the newest repack for new version has released for Smart DVB in date 11/1/2015.
Of course it’s will be included all plugins and some OSD that existing in the previous repack.
Also the installation folder will be has all setting and plugins in the same folder.
The AppData folder not set to use.
By that it will be easier to edit your servers and what you like to modified.
Finally the size will be 25 Mb for who like to know that





Change log? for the Repack




This its new version released 11/1/2015
Fixed the registration for filter
Change for using APPData folder for plugins & setting to be in the same folder where the
smartDVB will be (the path)
*tested with SmartWebIF and working fine.
What is New?
1-OSD SKIN PACK (3D OSD & BLACK OSD)
2-SMART DVB optimize by Ddv122 & ABDULLL
3-DVB Emulator Cam's
A-Vplug updated 22/1/2015 included
Vplug 2.4.6 F
b- NWemu new version 1.2.8 updated 30/12/2014
5-Plugins for Cccam & Newcamserver
A-ACamd
B-Hadu
6-Plugins for Dongle server all of them in Custom mode
A-Obox3.30
B-AbOx2.7.6 with server work
C-MDBoxPlugin10
7-Plugins for Connected Dongle in Custom mode
A-Dongle_BY_HaTy
B-RPLUG the plugin started with message
(Swear by god Greatest, am will not use this plugin for watching the Erotic channels)






Download links
Download link by torrent (magnet)












 

serkanguzel

Registered
Messages
1,442
SmartDVB v4.0.13


Code:
* PowerVU channels work.

* For Blind Scan, BLscan2 mod work. Tested Geniatech tv card.


PowerVU ;
j2PaRg.png




BLscan2 ;
oZPadQ.png


B0m1OV.png



Regards.
 

dahaka

Registered
Messages
700
SmartDVB 0.4.5 beta 1 test available

Hi to all,

After a long period here's the next SDVB (beta) update. As always lots of stuff changed/modified and this is a beta version so only install this if you know what you're doing and how to test this. Preferrably you should test this in seperate portable installs (so called program files install, but any folder can be used of course) so that if you have a main setup that won't be tampered with. Please remember that the app check for settings.ini in the local application folder at startup so you need to rename/remove that file, if there at all from a previous install, if you want to use seperate installs with seperate settings which don't interfere with each other. I mention this explicitly here since some of the fixes in this version pertain to scheduling from multiple instances which never had worked well before it seems (thanks to those who reported and tested this, you know who you are).

For this version the blindcan/dx part has been revamped a bit. It had been more than 2 years since the initial setup of the dx part based on streamreader.dll so an upgrade there was due time.

Grab the new setup here a changelog is provided below and included in the history.txt as always


What's new :
- fixed: dvb subtitles changes some subtitles weren't being shown correctly.
- fixed: some addon fixes, internal counter wasn't being updated so only one addon would be seen in the addon menu.
- fixed: bda.dev ms diseqc commited diseqc did not work properly.
- fixed: madvr issue where video would be hidden after showing normal (not sosd) epg (ctrl-e)
- fixed: mkv ffmpeg transcoded recordings were sometimes failing, default transcode.ini settings changes ('-fflags genpts' added thanks
to sinancetinkaya for figuring this out please remove the previous mkv record entries to use this new internal default)
from the ini to use the new defaults if so desired)
- fixed: remote ok/enter now expands/collapses a category when using the graphical list. This should allow better nagivation per remote.
- fixed: blindscan.dev now should also work with/tune dvb-t/c.
- fixed: various blindscanner cosmetic and user interface inconsistencies. Added frequency list and ability to start tranport stream
analyser on selected frequency.
- added: blscan2 support to the blindscanner.
- added: ability to do an rfscan from the blindscanner when selecting a tree frequency (it will also try to tune the frequency to
ensure we're on the sat).
- added: ability to get m3u list from the current satellite (for now only general and favorites can be retrieved). Http streaming
needs to be enabled. http://x.x.x.x:x/server?command=.m3u (or main.m3u) retrieves all channels for the currently
selected satellite. http://x.x.x.x:x/server?command=fav.m3u retrieves all favorites, http://x.x.x.x:x/server?command=fta.m3u all fta stations for the current freq list). Tested with vlc on windows. Also works with android with iptv tools that are able to load .m3u urls.
- modified: some changes to http processing to improve error handling etc when requesting lots of http streams.
- fixed: cosmetic bug with graphical status bar which sometimes would paint status messages with the wrong colours.
- modified: various internal changes to try to improve stability with various devices.
- fixed: some possible remote handling issues regarding tbs devices and driver versions.
- modified: some changes to the old legacy vmr osd handling to try to improve repsponsiveness there, also some legacy memory leaks
fixed there :)
- added: integrated tune and manual scan to normal scanner.
- added: mpeg 2 chroma (4:2:2) detection, only tested with transport stream recordings.
- fixed: some changes to try to handle scheduling with multiple instances correctly.
- fixed: changes to stream analyser due to crash reports.
- added: option to bda.dev settings to disable tbs remote processing. If you have stability issues with your tbs device which
supports a remote try to enable this settings to see if it improves stability. Restart sdvb to be sure after setting this
option.
- fixed: some bda.dev issue when switching devices concerning retaining correct settings per device (could be especially problematic
when switching devices these would not retain correct device type settings for diseqc etc).
- modified: some more scheduler bugfixes.
- added: pid recording to transport stream analyzer, 'analyzer.ts' will be created in the record folder.
- modified: some changes to the diseqc console regarding stability there. Signal status added and retune button.
- added: basic signal search/constellation to blindscanner (context menu options). Note this only works with streamreader.dll supported
devices (same as the blindscanner) so keep that in mind.
- fixed: some cosmetic fixes to the normal scanner.
- fixed: additional (extra) recordings were not being stopped due to disk space restrictions.
- fixed: issue with bda.dev where prefer capture and alternative signal detection were being saved incorrectly.
- fixed: bug in streamanalyzer which would not stop recording when closing analyzer without stopping the recording.
- added: option to streamanalyzer to record 184 bytes due to special request (was quite easy enough to do:) )
- fixed: calling rfscanner from blindscanner did not check if diseqc/positioner was necesarry.
- modified: made default rfscan window size somewhat larger (depending on your desktop size).
- added: save diagram option to constellation view.
- added: signal constellation/analyzer is now shown on the rfscanner double click instead of the previous scan information popup.
- fixed: some fixes to the diseqc console (or motor positioner). When called from the blindscanner it will try to tune the last blindscanned frequency.
Otherwise it tries to tune the last normally tuned frequency from the app or scanner.
- added: settings record option to record all dvb subtitles
- added: Options to main tools menu to also show signal analyzer directly from the app (it automatically switches to blindscan.dev, if you don't want that make sure
you also use blindscan.dev to tune).
- added: option to record context menu to add some time to the end of record (5,10,15,30 or 60 minutes)
- modified: some small changes to transponder ini parsing to allow for updates from http://satellites-xml.eu/,
- added: device id is also added after caption tuner name (by request). This (including the tuner name) can be disabled by selecting
'tools > settings > general > do not show device name after application name'
- modified: issue with the epg search dialog which would sometimes take too long to reload when switching from the dates to stations view.
- modified: versioning of device modules is now taken from the file version instead of the previous internal version (and yes indeed file versions were
from 1.0.0.0 from the start, i won't lower them since this could cause install problems otherwise).
- modified: added some checks to blindscanner/signal analyzer/rfscanner for specific streamreader.dll support (blscan/blscan2/rfscan etc).
- modified: some more changes to the diseqc console at the blindscanner dialog for blscan2 compatibility (it was freezing when blscan2 was in use).
- modified: Blindscan 2 handling modified due to reported freezes when us blscan2.
- added: initial signal monitoring setup to signal analyzer, integrated with the search/constellation dialog
- fixed: schedule task dialog now retains some modified settings (at start action, at end action, wakeup, renderless, timeout). Also renderless
mode should be indicated by the ui now also.
- fixed: some inconsistencies with processing and saving mis/pls in normal scanner which at some places was still using MIS:[PLS0:1] for example. PLS string
is removed also to be consistent with blindscanner/signal analyzer etc.
- modified: blindscan.dev and smartdvb now use the latest current streamreader.dll and headers with preber modification to SEARCH_RESULT (version 1.2.3.1319)
- added: secondary blindscan2 mode (minimal ranges mode gives beter UI response but the blindscan might be slower)
- fixed: rfscanner had some pesky introduced bug in latest test version
- modified: replaced satellite transponder .ini files with more current ones.
- modified: transponder.ini satellites entries updated and now all .ini's should be installed from an installer exe which should
not create a registry entry for each install.
https://dl.dropboxusercontent.com/u/51980102/SmartDVB045beta1tst.zip
 
Last edited by a moderator:

AHMAD ALBAHETH

Registered
Messages
166
Smart DVB 0.4.5 Ahmad Edition



EksY5Vj.png



AaGsunE.png



cSVYBzd.png



NlKlz5t.png



qaaZlsI.png






Download link:thum::thum::thum:







password:ahmadalbaheth2016good
 
Last edited by a moderator:

jackjavo

Registered
Messages
8
A new version (release candidate) is available. This version is mainly about stability and fixes. Some internal changes have been made to make the application more responsive and stable concerning video display.


https://dl.dropboxusercontent.com/u/51980102/SmartDVB050RC.zip

changelog:


v0.5.0.0 RC
fixed: polsat epg was broken.
fixed: blue epg would fail when moving page up etc.
fixed: scheduler display bug which would sometimes show some garbled epg text in the list.
added: epg title search/imdb search and clipboard text copy to main epg pane and epg search dialog. the imdb search string is configurable through the settings.ini (in case the imdb search string would change you should be able to change the default search string here).

modified: scheduler now shows actual scheduled times in larger red font.
added: program guide search toolbar button.
fixed: schedule add task dialog cosmetic issues fixes.
fixed: issues when using scheduler timeout messages which could result in erratic behaviour.
fixed: command bar position saving was broken (while at it added main window epg/record column size saving to settings).
added: epg search dialog toolbar button.
added: date entry for recordings to the record context menu.
added: scheduler conflict management (required almost a total rewrite of the scheduler)(requires lots of testing). This needs to be tested and can optionally be enabled through the scheduler settings.

added: import pre 0.4.5 scheduler tasks to scheduler settings.
modified: internal changes to signal handling to try to improve app responsiveness. If you have app stability issues related to signal handling please let me know.
fixed: PIP stay on top was not working correctly
fixed: m3u list channel change would fail when multiple devices are used. (untested bugfix)
added: A/B audio channel selection to application status bar (only graphical status bar). Audio processing filter needs to be enabled (settings > connection)
fixed: some signal monitor/analyzer cosmetic graph update issues
modified: some changes/fixes to mdapi unloading, let me know if this causes issues/exception when exiting the app or switching devices etc.

fixed: normal bda.dev (tbs only) pls tuning seemed broken due to some debug code leftovers.
added: option to scheduler settings to enable scheduler conflict resolving.
fixed: signal constellation would not be repainted on window resize.
modified: moved signalanalyzer string to resources.
fixed: issue with scrollwheel and volume when app started without tune.
modified: streamreader.dll updated to version 1.2.3.1382
fixed: some changes to signalanalyzer signal monitoring which seemed erratic here and there.
fixed: added a/b selection was not working properly
modified: Germany.Unitymedia NRW transponder .ini updated.
modified: some internal changes
modified: blinscan.dev updated to latest streamreader sdk.
fixed: some small fixes to graphical channel list (dragging in single channel selection mode should work better now).
fixed: fixes
modified: some changes to scanner channels process/update logic.
modified: added support for MainConcept HEVC decoder you need to manually add "video9=MainConcept HEVC Video Decoder,{A8AD11CE-3CBD-4E8E-9786-6029F372A5D0},HEVC,Video" to your filters.ini (or clean setup)

fixed: audio a/b statusbar selection would not correctly play both channels.
fixed: null (client) device wasn't working properly for other device types.
fixed: blindscanner in blscan2 max ranges mode would scan some frequencies too much, this could make this scan with channels faster if your device supports blscan2.
fixed: fixes.
fixed: dvb file play bug which would cause buffer overruns there.
modified: some changes to EVR handling.
fixed: dvb file play mode loop setting (directshow) was not being retained at the next startup.
fixed: fixes/changes to exit process since there are occacional crashes here. Please let us know if you still have this issue.
modified: some changes to osd epg, always enforced non transparency etc previously it would take too much memory and could create problems with the renderer (delays).
fixed: PIP main tab window clicks were crashing due to recent changes to the single click drag and drop.
fixed: PIP main tab channel switches had issues with mdapi.
modified: version bump to 0.5.0, improved stability warrants this.
fixed: some more exit modifications and fixes to bda.dev direct mode.
fixed: some more stability changes.
 

dahaka

Registered
Messages
700
0.5.0 RC 1 Hotfix (build 0.5.0.11)

Download 0.5.0 RC 1 Hotfix (build 0.5.0.11)

Above hotfix includes an update for SmartDVB.EXE and bda.dev with bug fixes and some changes to EVR fullscreen/windowed/main mode to remove the delays and repaint issues which occured there.
Bda.dev includes a bugfix which could cause exit crash with some devices on windows 10. You should replace the current SmartDVB.EXE and bda.dev with the one provided in this hotfix. For information on where bda.dev is, if you can’t find it, please see the SmartDVB help section ‘local application data files/folders’.
 

tani1

Staff member
Super Moderator
Messages
17,767
SmartDVB 0.5.0 RC2 is available!

v0.5.0.36RC2
◾HEVC playback has been improved with this version, lentoid codec should work now also.
◾AAC playback might also work better with the LAV and MS AAC decoders.
◾Also MadVR support has been updated for the current MadVR versions.
 

tani1

Staff member
Super Moderator
Messages
17,767
SmartDVB 0.5.0.51 RC3 is available!

v0.5.0.51 RC3
◾Initial PLP (DVB-T2) support added.
◾Some enhancements to the normal scanner for INI management.
◾Ability to add a new channel in the channel properties dialog.
◾Various fixes and improvements to channel tuning.
◾Remotes were not working for non TBS devices, should be better now.
 
Top