how work receiver MicroBox on Server newcamd

baloota

Registered
Messages
2,055
microboxminiftareceiver.jpg


first you must load SW Botech V1.09 MiniBox update

after loading SW pressure from the remote button and then Blue 000

then we see patch enabled

after pressure from the remote key, and then the Blue 111

and choose from the menu that will appear PC card sharing ECM and push Ok

now the device is ready to run on the server

*****How to develop a program of data MicroBox FTA CSC

we have to download the program attached MicroBox FTA CSC

81927014.png


31068216.png



after do that

go to program MicroBox FTA CSC and open

and go setting and click star

Note you must use the link that came with receiver

Of the link between the receiver and the computer
 

Bawasani

Registered
Messages
320
microboxminiftareceiver.jpg


first you must load SW Botech V1.09 MiniBox update

after loading SW pressure from the remote button and then Blue 000

then we see patch enabled

after pressure from the remote key, and then the Blue 111

and choose from the menu that will appear PC card sharing ECM and push Ok

now the device is ready to run on the server

*****How to develop a program of data MicroBox FTA CSC

we have to download the program attached MicroBox FTA CSC

81927014.png


31068216.png



after do that

go to program MicroBox FTA CSC and open

and go setting and click star

Note you must use the link that came with receiver

Of the link between the receiver and the computer

Hi
Thanks for this good work, however is there any available server? or what should i do?
 

Bawasani

Registered
Messages
320
microboxminiftareceiver.jpg


first you must load SW Botech V1.09 MiniBox update

after loading SW pressure from the remote button and then Blue 000

then we see patch enabled

after pressure from the remote key, and then the Blue 111

and choose from the menu that will appear PC card sharing ECM and push Ok

now the device is ready to run on the server

*****How to develop a program of data MicroBox FTA CSC

we have to download the program attached MicroBox FTA CSC

81927014.png


31068216.png



after do that

go to program MicroBox FTA CSC and open

and go setting and click star

Note you must use the link that came with receiver

Of the link between the receiver and the computer

Pls sir I updated as explained but i got message configuration setting error and also STB not supported. Doest it need to be constantly on internet?
 

chengannur

Registered
Messages
132
microboxminiftareceiver.jpg


first you must load SW Botech V1.09 MiniBox update

after loading SW pressure from the remote button and then Blue 000

then we see patch enabled

after pressure from the remote key, and then the Blue 111

and choose from the menu that will appear PC card sharing ECM and push Ok

now the device is ready to run on the server

*****How to develop a program of data MicroBox FTA CSC

we have to download the program attached MicroBox FTA CSC

81927014.png


31068216.png



after do that

go to program MicroBox FTA CSC and open

and go setting and click star

Note you must use the link that came with receiver

Of the link between the receiver and the computer

Not clear at all... Please explain what is it for and the benefit of doing all these procedures... Thanx
 

ssatmaniac

Registered
Messages
4
you can use microbox with receivers that can run newcamd.
dreambox..etc
this works only with the specific firmware update?the patch is enabled only in this update?
 

farhanno

Registered
Messages
14
i am just new beginner with Micro Box Dongle.how dose this thing work with Echolink fta 888.i got this from khi but they said that its working on w3 or w6 but i am here in Dubai not much people help here like Karachi if u ask.pls if i will use w3 dish which freq to check that signal is good some one said to check on w3 11283 signal if good than it will.pls guide me bro i really need help thanks
 

cannon_29

Registered
Messages
44
you can use microbox with receivers that can run newcamd.
dreambox..etc
this works only with the specific firmware update?the patch is enabled only in this update?

how to get microbox dongle to work with dreambox500s newcamd protocol?
 

fjmog

Registered
Messages
57
i am just new beginner with Micro Box Dongle.how dose this thing work with Echolink fta 888.i got this from khi but they said that its working on w3 or w6 but i am here in Dubai not much people help here like Karachi if u ask.pls if i will use w3 dish which freq to check that signal is good some one said to check on w3 11283 signal if good than it will.pls guide me bro i really need help thanks

No need W3 or W6 ,:clapping:
 

auwalu2004

Registered
Messages
2
i am just new beginner with Micro Box Dongle.how dose this thing work with Echolink fta 888.i got this from khi but they said that its working on w3 or w6 but i am here in Dubai not much people help here like Karachi if u ask.pls if i will use w3 dish which freq to check that signal is good some one said to check on w3 11283 signal if good than it will.pls guide me bro i really need help thanks
use 12728 v 30000
 
Top