Last Oscam for Atom CPU based Synology NAS

powercisco

Super VIP
Messages
9,100
Atom CPU based Synology NAS (DS713+ DS2413+ DS1512+ DS1812+ RS812+/RS812RP+ RS2212+/RS2212RP+ DS411+ DS411+II DS1511+ DS2411+ RS2211+/RS2211RP+ DS710+ DS1010+ RS810+/RS810RP+)

Oscam1.20 svn8642

- Changeset [8642] by docman
Added 'lb_nbest_readers' and '_nbest_readers_tab' to 'oscam.user' documentation.
Removed 'lb_reopen_mode' from documentation.

thanks LePouSAT
 

powercisco

Super VIP
Messages
9,100
Oscam1.20 svn8648

- Changeset [8648] by theparasol
- Loadbalancer fix for lb_value=0 problem tnx Blueven for providing patch
- Changeset [8647] by theparasol
- Init ecm rc status to E_UNHANDLED

thanks LePouSAT
 

powercisco

Super VIP
Messages
9,100
Oscam1.20 svn8658

- Changeset [8658] by theparasol
- More fix for radegast protocol tnx goodsat for patch
- Changeset [8657] by theparasol
- Fix for connection timeout after EMM is send over cs378x
Tnx to skyjet for patch
- Changeset [8656] by theparasol
- Revert 8655 (loadbalancer knocking failed srvids on readers once)
Add new parameter in reader setup lb_whitelist_service
tnx to Blueven for providing patch

thanks LePouSAT
 

powercisco

Super VIP
Messages
9,100
Oscam1.20 svn8667

- Changeset [8667] by bowman
Fixed debug logging that wasn't platform independent
- Changeset [8666] by bowman
Completed support for incoming udp cache updates from csp
and added experimental outgoing push (untested)
- Changeset [8665] by Eggy123
a) Fixed bug in hello logic: start counting card number at 0 again after hello packet send
b) Switch to next state only after last packet

thanks LePouSAT
 

powercisco

Super VIP
Messages
9,100
Oscam1.20 svn8668

- Changeset [8668] by bowman
Skip push to csp if source is remote cacheex for now (might cause loops).
Added sending of cache pings.

thanks LePouSAT
 

powercisco

Super VIP
Messages
9,100
Oscam1.20 svn8669

- Changeset [8669] by bowman
Added the last request type used by csp clusteredcache and cleaned things up a bit.
Further discussion/testing needed proceed.

thanks LePouSAT
 

powercisco

Super VIP
Messages
9,100
Oscam1.20 svn8675

- Changeset [8675] by docman
Documentation update for 'ecmfmt': new option ONID.

- Changeset [8674] by docman
Documentation update for CSP: TCP -> UDP.

- Changeset [8673] by docman
Added new parameter 'lb_nfb_readers' to 'oscam.user', now TXT and HTML Format, too.

- Changeset [8672] by docman
Added new parameter 'lb_nfb_readers' to 'oscam.user'.

- Changeset [8671] by docman
Documentation update for gbox port definitions.

- Changeset [8670] by manio
cosmetics: fix MHz spelling Hertz is a unit from SI and need to preserve a correct case (​en.wikipedia.org/wiki/SI_derived_unit)

thanks LePouSAT
 

powercisco

Super VIP
Messages
9,100
06.06.2013 Oscam1.20 svn8684

- Changeset [8684] by docman
Updated documentation for gbox TCP -> UDP.
- Changeset [8683] by docman
Removed 'decodeforever' from documentation.
- Changeset [8682] by theparasol
- Tryfix azbox support - Fix dvbapi part on latest code analysis posted by Gorgone

thanks LePouSAT
 

powercisco

Super VIP
Messages
9,100
20.06.2013 Oscam1.20 svn8705

- Changeset [8705] by stefansat
Same rules off 6a do apply for 6c and 6d
This avoids a lot off fake or non working ecm to 6c and 6d card's

thanks LePouSAT
 

powercisco

Super VIP
Messages
9,100
Oscam1.20 svn8721

- Changeset [8721] by goodsat
Patch long ecm size ecm max + header max newcamd 12
- Changeset [8720] by lattjo
Re-arranged some variabels.
Saves a few bytes of memory for each reader if compiling without cardreaders.
-Changeset [8719] by lattjo
smargo: Implement set_parity to make sure correct parity is set after ATR is read.
- Changeset [8718] by lattjo
smargo: Some more cleanup

thanks LePouSAT
 

powercisco

Super VIP
Messages
9,100
Oscam1.20 svn8749

- Changeset [8749] by bowman
Finalized ghttp autoconf.
-Changeset [8748] by theparasol
Dump work in progress on dvbapi modules
Fixed chid prio without force
Restored channelcache chid I removed before
Channelcache chid now overrules oscam.dvbapi prio chid
Pids without status / prio start in second descramble run, not in first
Tryfix stapi starting up streamfilters in standby
- Changeset [8747] by bowman
Work in progress: Added an autoconfig page for ghttp to the webif.

thanks LePouSAT
 

powercisco

Super VIP
Messages
9,100
19.07.2013 Oscam1.20 svn8758

- Changeset [8758] by stefansat
added nagra chid info
this info is correct for all nagra/seca based cards when using the nagra pid
- Changeset [8757] by lattjo
Cryptoworks: Fixed spelling error in log
- Changeset [8756] by docman
Update documentation for penalty: disable to ban.

thanks LePouSAT
 

powercisco

Super VIP
Messages
9,100
24.07.2013 Oscam1.20 svn8767

- Changeset [8767] by stefansat
changed lb into the loadbalancer

thanks LePouSAT
 

powercisco

Super VIP
Messages
9,100
05.08.2013 Oscam1.20 svn8816

- Changeset [8816] by gorgone.impertinence
fix footer link
- Changeset [8815] by gorgone.impertinence
fix rederstats menu
- Changeset [8814] by gorgone.impertinence
restore modern webif first release no optimisations !!!
- Changeset [8813] by gorgone.impertinence
firs clean

thanks LePouSAT
 

powercisco

Super VIP
Messages
9,100
23.01.2014 Oscam1.20 svn9437

- Changeset [9437] by gorgone.impertinence
allow override for picons in user & status

- Changeset [9436] by gorgone.impertinence
replace more drop-down with check-box
- Changeset [9435] by gorgone.impertinence
change addservice to top input (like every other add new) resize & rename …
- Changeset [9434] by gorgone.impertinence
disable important if size is 0 size 0 is default

thanks LePouSAT
 

trebor666

Registered
Messages
1
Oscam 1.20 svn 9812 atom (Synology - cedarview)

:thum:

Here ftp://wdb-1512.synology.me/oscam

user: oscam
pass: oscam


The file is root.zip and contains files and structure

the latest oscam for Synology NAS like DS 1512+ (Atom DS2700) with smartreader support, it was cross compiled on Ubuntu 12.04 with x86_64-PC-linux-gnu compiler

including needed libusb-1.0.so.0.1.0 which is ELFCLASS64 (64-bit)

place oscam in /opt/bin and chmod +x (rights 755)
place libusb-1.0.so.0.1.0 in opt/lib and chmod +x (rights 755)
make a link in the folder /lib64 (it is located directly under root), name libusb-1.0.so.0 and the target is /opt/lib/libusb-1.0.so.0.1.0

Don't Forget to Change rights of the two first files. If you need start/stop scripts or config files let me know

Enjoy
trebor666
 
Last edited:

powercisco

Super VIP
Messages
9,100
09.03.2016 Oscam1.20 svn 11212

Changeset [11212] by gorgone.impertinence
fix small bug with channelname on srvid2 for fta

thanks LePouSAT
 
Top