Cccam in Arion - Ferguson AFxx

JAKITAKI

Super VIP
Messages
9,214
13.06.2009


new Cccam in arion ferguson AFxx withe programme PlugDVB127.exe and DVBxtreme soft

-Select gboxsssp and And follow the mhetode in Photo

-open CCcam in arion ferguson_AFxx programme and in plugines Find file flycccam Type your c line of cccam

51165887.jpg


# look the line c

53739486.jpg


# click in PlugDVB127.exe

84275886.jpg


# configration com

19147468.jpg


# cccam ok now

37428124.jpg


thanks @ borsalino
 

JAKITAKI

Super VIP
Messages
9,214
19147468.jpg




One very important point.
Baut Rate - set to 115200
Only in this setting, started
:thum:
 

JAKITAKI

Super VIP
Messages
9,214
new tools CCCAM, tested on Ferguson AF with firmware DvbXtreme AF7_RC7 and A03
- A very good test
:clapping::thum:
 

JAKITAKI

Super VIP
Messages
9,214
How it Works?

1.Install First Fausto Last Version

2.Install CardSharing-X Yuma1.0 for Fausto on Bottom is File for Download.

3.Connect your box with rs 232 cable.


Now CardSharing-X Yuma1.0
Connect Fausto and box supporting serial Truman Share (Yumatu,Opticum...) In 3 steps .

STEP 1 - Add CCCam C: Server Line

STEP 2 - Select Com Port

STEP 3 - Press Connect

Operates at Ferguson AFxx18, the test 100% :thum: :thum: :thum:

snap1.gif


34690376.gif


13832245.gif


22109809.gif



Code:
In the configuration of the tuner set sharing (Gbox SSSP), we mark all the coding systems, as in other settings sharing NewCamd

Tools Sharing

http://www.sat-universe.com/attachment.php?attachmentid=200760&d=1268421558
 

qnx

Registered
Messages
2
Which verssion of Fausto i should use ?
I trayed 1,36 and 1,37 and all verssion dont work with Yuma ( i cant change option to SSP )
On my ferguson i have AF7_RC6

Thx for help
 

qnx

Registered
Messages
2
thx for replay
but it dont work at my ferguson :-(
Could you share with me your softwore pack ?
My c-line connect to the server with caid 0100 0b00 and 1803
Did you sucessful setup 1803 (polsat) on ferguson using gbox-ssp?

thx for your answer
 

JAKITAKI

Super VIP
Messages
9,214
thx for replay
but it dont work at my ferguson :-(
Could you share with me your softwore pack ?
My c-line connect to the server with caid 0100 0b00 and 1803
Did you sucessful setup 1803 (polsat) on ferguson using gbox-ssp?

thx for your answer

Tested on firmware DVbXtreme AF7_RC7
in my C + and Polsat working.
It is important that line C was a maximum of HOP2
 

JAKITAKI

Super VIP
Messages
9,214
Fausto 1.43_ Emu keys

- using Fausto1.43 we can use the keys EMU and the promotion of the CCW
not wgrywając them to a receiver, and using just keys and Fausto Diablo.bin *


- this is a way, sharing key EMU
- But you can treat it as test :D :


- that is, in Fausto and tuner set everything as described above.

- Fausto open****> Accessories**** emulator

snap2g.gif


- In the open window (key files) to open the new keys Diablo.bin
- And it all ......... we see what is in the promotion :thum:
 

ali3333

Registered
Messages
14
On Fausto v 1.42 biss key is not working properly,
Fausto attepts and pic the key up correct but receiver does not show channel.
As an example PTV K FEED Asiasat (3S 105.5E) bis running key is 000000000007868D sid 0003 caid 2600 but fausto shows only pmt information and does not show ecm, why?
 

luislay

Registered
Messages
14
what do i need to make it work on Arion AF-8000HDCI?

pls list the programs and i have emu soft on my reicever.
 

JAKITAKI

Super VIP
Messages
9,214
gladiator_sssp_cccam_newcs_V1.06

used to program the tuner HF sharing 8800/8900HD
Very well with the series AFxx18 tuners.
In particular, very well run cccam tests I noticed far better performance
than is the case, for example using SSSpv.1.2 and flycccam.
Switching takes place as smoothly.
I'll add that I tested on the test of HOP3 if cards are closer to work should be
definitely better.

snap1.gif


Settings

- The first thing you should do is edit the configuration file with the data servers that we want to test
- For example, edited line C: ::

snap3.gif


- edit lines, time to set the tuner:

- If test NewCS, set::

Sharing MODE: Newcamd
CA System: ALL CA_ID
TRY EMU: NO
TIMEOUT DELAY: 9999

- if test cccam:

Sharing MODE: Gbox (SSSp),
CA System: ALL CA_ID
TRY EMU: NO
TIMEOUT DELAY: 9999

- now remains for us to fire up the program:

snap4.gif


- when the test is active in the window server lit green.
- Entering into the tab and selecting np.1 NET Server, we have a preview, among other things
which makes use of the card.

Have fun :thum:
 

JPA

Registered
Messages
42
hello have problem soft gladiator not open seca?
because it will
would appreciate help:mecry:
 

JPA

Registered
Messages
42
Gladiator ver.1.07

have probleme
version1.07 PL always block and the other by pressing the star enable error:(
 
Top