oscam and dragocard upc

red · Sep 2, 2011

tryed it still no picture l have a vu+ solo to maybe it can work in vu+solo external reader l have to go for now but thanks alot guli for your time and patients l really apriciate it and to others like xxxtomxxx to

will be back tonight

tsitsi58 · Sep 13, 2011

i changed my settings in oscam files as seen below

oscam config

[global]
logfile = /tmp/oscam.log
cachedelay = 120
nice = -1
maxlogsize = 500

[monitor]
port = 988
nocrypt =
aulow = 120
hideclient_to = 15
monlevel = 4
appendchaninfo = 0

[newcamd]
port = 14000@0D02:0000A0
key = 0102030405060708091011121314
allowed =
keepalive = 1
mgclient = 0

[webif]
httpport =50005
httpuser =......
httppwd = ......
httprefresh = 10
httpallowed = 127.0.0.1-255.255.255.255
httphideidleclients = 0
httpreadonly = 0
httpsavefullcfg = 0

# protocols

oscam server

[reader]
label = upc_bluedrag
enable = 1
protocol = internal
device = /dev/sci0
pincode = 0000
caid = 0D02
services =
fix9993 = 0
detect = cd
mhz = 357
cardmhz = 357
ident = 0D02:0000A0
group = 1
emmcache = 1,1,2
lb_weight = 100

oscam user

[account]
user = .....
pwd = .....
group = 1
au = upc
caid = 0D02
ident = 0D02:00008C,0000A0,0000A4,0000A8

cccam config

N: 127.0.0.1 14000 ...... ..... 01 02 03 04 05 06 07 08 09 10 11 12 13 14

now i can see the card in web info seems the internal reader can read the card but can't decode channels see the log below

011/09/13 11:42:53 11075 s cs378x: disabled
2011/09/13 11:42:53 11075 s newcamd: initialized (fd=10, port=14000, crypted)
2011/09/13 11:42:53 11075 s CAID: 0D02
2011/09/13 11:42:53 11075 s provid #0: 0000A0
2011/09/13 11:42:53 11075 s cccam: disabled
2011/09/13 11:42:53 11075 s radegast: disabled
2011/09/13 11:42:53 11075 s logger started (pid=11077)
2011/09/13 11:42:53 11075 s Resolver thread started
2011/09/13 11:42:53 11075 s http started (pid=11080)
2011/09/13 11:42:53 11075 s reader started (pid=11081, device=/dev/sci0)
2011/09/13 11:42:53 11075 s anti cascading disabled
2011/09/13 11:42:53 11075 s dvbapi: dvbapi disabled
2011/09/13 11:42:53 11080 h HTTP Server listening on port 50005
2011/09/13 11:42:53 11081 r02 card detected
2011/09/13 11:42:54 11081 r02 ATR: 3B 78 12 00 00 54 C4 03 00 8F F1 90 00
2011/09/13 11:42:56 11081 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2011/09/13 11:42:57 11081 r02 [cryptoworks-reader] card detected
2011/09/13 11:42:57 11081 r02 [cryptoworks-reader] type: CryptoWorks
2011/09/13 11:43:00 11081 r02 type: CryptoWorks, caid: 0D00, ascii serial: 0, hex serial: 0000000000
2011/09/13 11:43:08 11081 r02 issuer: unknown, id: 00, bios: v3, pin: unknown, mfid: 3F02
2011/09/13 11:43:08 11081 r02 providers: 4 (8C,A0,A4,A8)
2011/09/13 11:43:13 11075 s client(1) connect from 127.0.0.1 (pid=11137, pipfd=16)
2011/09/13 11:43:14 11137 c01 encrypted newcamd:14000-client 127.0.0.1 granted (....., au=0)
2011/09/13 11:43:14 11137 c01 user ...... authenticated successfully (CCcam)
2011/09/13 11:43:14 11137 c01 AU disabled for user .....
2011/09/13 11:43:14 11081 r02 provider: 1, id: 8C
2011/09/13 11:43:28 11137 c01 ..... (0D02&0000A0/77F4/84:4040): not found (1458 ms)

why do you thing cant decode channels i use oscam 2901 and cccam 213 in dream elite image dm800 clone.thanks

guli · Sep 13, 2011

a few points try with these changes & restart .

stop oscam . stop CCcam . restart oscam . restart CCcam .

oscam.conf

[global]
logfile = /tmp/oscam.log
cachedelay = 120
nice = -1
maxlogsize = 500

[monitor]
port = 988
nocrypt =
aulow = 120
hideclient_to = 15
monlevel = 4
appendchaninfo = 0

[newcamd]
port = 14000@0D02:00008C,0000A0,0000A4,0000A8
key = 0102030405060708091011121314
keepalive = 1

[webif]
httpport =50005
httpuser =......
httppwd = ......
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
httphideidleclients = 0
httpreadonly = 0
httpsavefullcfg = 0

oscam server

[reader]
label = upc
enable = 1
protocol = internal
device = /dev/sci0
pincode = 0000
services =
fix9993 = 0
detect = cd
mhz = 500
cardmhz = 500
caid = 0D02
ident = 0D02:00008C,0000A0,0000A4,0000A8
group = 1
emmcache = 1,3,2
lb_weight = 100

oscam user

[account]
user = .....
pwd = .....
group = 1
au = upc
caid = 0D02
ident = 0D02:00008C,0000A0,0000A4,0000A8

CCcam.cfg

N: 127.0.0.1 14000 ...... ..... 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

tsitsi58 · Sep 13, 2011

2011/09/14 0:08:30 3028 s signal handling initialized (type=sysv)
2011/09/14 0:08:30 3028 s 333 service-id's loaded
2011/09/14 0:08:30 3028 s can't open file "/var/tuxbox/config/oscam.provid" (err=2), no provids's loaded
2011/09/14 0:08:30 3028 s monitor: initialized (fd=9, port=988)
2011/09/14 0:08:30 3028 s camd 3.3x: disabled
2011/09/14 0:08:30 3028 s camd 3.5x: disabled
2011/09/14 0:08:30 3028 s cs378x: disabled
2011/09/14 0:08:30 3028 s newcamd: initialized (fd=10, port=14000, crypted)
2011/09/14 0:08:30 3028 s CAID: 0D02
2011/09/14 0:08:30 3028 s provid #0: 00008C
2011/09/14 0:08:30 3028 s provid #1: 0000A0
2011/09/14 0:08:30 3028 s provid #2: 0000A4
2011/09/14 0:08:30 3028 s provid #3: 00A8A0
2011/09/14 0:08:30 3028 s cccam: disabled
2011/09/14 0:08:30 3028 s radegast: disabled
2011/09/14 0:08:30 3028 s logger started (pid=3030)
2011/09/14 0:08:30 3028 s Resolver thread started
2011/09/14 0:08:30 3028 s http started (pid=3032)
2011/09/14 0:08:30 3028 s reader started (pid=3033, device=/dev/sci0)
2011/09/14 0:08:30 3028 s anti cascading disabled
2011/09/14 0:08:30 3028 s dvbapi: dvbapi disabled
2011/09/14 0:08:30 3032 h HTTP Server listening on port 50005
2011/09/14 0:08:31 3033 r02 card detected
2011/09/14 0:08:32 3033 r02 ATR: 3B 78 12 00 00 54 C4 03 00 8F F1 90 00

2011/09/14 0:08:34 3033 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2011/09/14 0:08:35 3033 r02 [cryptoworks-reader] card detected
2011/09/14 0:08:35 3033 r02 [cryptoworks-reader] type: CryptoWorks
this is the log file after settings

tsitsi58 · Sep 13, 2011

2011/09/14 0:08:35 3033 r02 [cryptoworks-reader] card detected
2011/09/14 0:08:35 3033 r02 [cryptoworks-reader] type: CryptoWorks
2011/09/14 0:08:38 3033 r02 type: CryptoWorks, caid: 0D00, ascii serial: 0, hex serial: 0000000000
2011/09/14 0:08:46 3033 r02 issuer: unknown, id: 00, bios: v3, pin: unknown, mfid: 3F02
2011/09/14 0:08:46 3033 r02 providers: 4 (8C,A0,A4,A8)
2011/09/14 0:08:51 3028 s client(1) connect from .......(pid=3089, pipfd=16)
2011/09/14 0:08:51 3089 c01 encrypted newcamd:14000-client ..... granted (tsitsi, au=upc)
2011/09/14 0:08:51 3089 c01 user tsitsi authenticated successfully (CCcam)
2011/09/14 0:08:51 3089 c01 AU enabled for user tsitsi on reader upc
2011/09/14 0:08:51 3033 r02 provider: 1, id: 8C
2011/09/14 0:09:22 3089 c01 tsitsi (0D02&0000C4/05E6/84:B516): rejected user ident (123 ms)
2011/09/14 0:09:33 3089 c01 tsitsi (0D02&0000C4/05E6/84:8C45): rejected user ident (121 ms)
2011/09/14 0:09:34 3089 c01 tsitsi (0D02&0000C0/027C/8B:BEC1): rejected user ident (121 ms)
2011/09/14 0:09:44 3089 c01 tsitsi (0D02&0000C4/05E6/84:884A): rejected user ident (120 ms)

tsitsi58 · Sep 13, 2011

i dont know why still cant decode channels by the way thanks guli for reply

xXTomXx · Sep 13, 2011

2011/09/14 0:08:51 3033 r02 provider: 1, id: 8C
this is wrong

be sure you have this in:
[newcamd]
port = 14000@0D02:00008C,0000A0,0000A4,0000A8

guli · Sep 13, 2011

2011/09/14 0:09:22 3089 c01 tsitsi (0D02&0000C4/05E6/84:B516): rejected user ident (123 ms)

are you sure the card ident 's are correct .

[newcamd]
port = 14000@0D02:00008C,0000A0,0000A4,0000A8
key = 0102030405060708091011121314
keepalive = 1

you have 4 idents . what i would suggest is delete all & try with 1 by 1 .

don't forget to change ident accordingly in reader + user section .

then restart .

tsitsi58 · Sep 13, 2011

these are my settings

[global]
logfile = /tmp/oscam.log
cachedelay = 120
nice = -1
maxlogsize = 500

[monitor]
port = 988
nocrypt =
aulow = 120
hideclient_to = 15
monlevel = 4
appendchaninfo = 0

[newcamd]
port = 14000@0D02:00008C,0000A0,0000A4,0000A8
key = 0102030405060708091011121314
keepalive = 1

[webif]
httpport =50005
httpuser =
httppwd =
httprefresh = 10
httpallowed = ...........,192.168.0.0-192.168.255.255
httphideidleclients = 0
httpreadonly = 0
httpsavefullcfg = 0

tsitsi58 · Sep 13, 2011

i will try what do you mean don't forget to change ident accordingly in reader + user section .for example
newcamd port = 14000@0D02:00008C
and in user config dent = 0D02:00008C ?

guli · Sep 13, 2011

try with this config mate .

[newcamd]
port = 14000@0D02:00008C;0000A0;0000A4;0000A8
key = 0102030405060708091011121314
keepalive = 1

don't forget to change ident accordingly in reader + user section .

then restart .

tsitsi58 · Sep 13, 2011

2011/09/14 1:11:28 10915 s max. clients=29, client max. idle=120 sec
2011/09/14 1:11:28 10915 s max. logsize=500 Kb
2011/09/14 1:11:28 10915 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=120 ms
2011/09/14 1:11:28 10915 s shared memory initialized (size=495334, fd=5)
2011/09/14 1:11:28 10915 s auth size=4764
2011/09/14 1:11:28 10915 s services reloaded: 0 services freed, 20 services loaded
2011/09/14 1:11:28 10915 s userdb reloaded: 0 accounts freed, 1 accounts loaded, 0 expired, 0 disabled
2011/09/14 1:11:28 10915 s signal handling initialized (type=sysv)
2011/09/14 1:11:28 10915 s 333 service-id's loaded
2011/09/14 1:11:28 10915 s can't open file "/var/tuxbox/config/oscam.provid" (err=2), no provids's loaded
2011/09/14 1:11:28 10915 s monitor: initialized (fd=9, port=988)
2011/09/14 1:11:28 10915 s camd 3.3x: disabled
2011/09/14 1:11:28 10915 s camd 3.5x: disabled
2011/09/14 1:11:28 10915 s cs378x: disabled
2011/09/14 1:11:28 10915 s newcamd: initialized (fd=10, port=14000, crypted)
2011/09/14 1:11:28 10915 s CAID: 0D02
2011/09/14 1:11:28 10915 s provid #0: 00008C
2011/09/14 1:11:28 10915 s cccam: disabled
2011/09/14 1:11:28 10915 s radegast: disabled
2011/09/14 1:11:28 10915 s logger started (pid=10917)
2011/09/14 1:11:28 10915 s Resolver thread started
2011/09/14 1:11:28 10915 s http started (pid=10919)
2011/09/14 1:11:28 10915 s reader started (pid=10920, device=/dev/sci0)
2011/09/14 1:11:28 10915 s anti cascading disabled
2011/09/14 1:11:28 10915 s dvbapi: dvbapi disabled
2011/09/14 1:11:28 10919 h HTTP Server listening on port 50005
2011/09/14 1:11:28 10920 r02 card detected

tsitsi58 · Sep 13, 2011

2011/09/14 1:11:29 10920 r02 ATR: 3B 78 12 00 00 54 C4 03 00 8F F1 90 00
2011/09/14 1:11:31 10920 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2011/09/14 1:11:32 10920 r02 [cryptoworks-reader] card detected
2011/09/14 1:11:32 10920 r02 [cryptoworks-reader] type: CryptoWorks
2011/09/14 1:11:35 10920 r02 type: CryptoWorks, caid: 0D00, ascii serial: 0, hex serial: 0000000000
2011/09/14 1:11:43 10920 r02 issuer: unknown, id: 00, bios: v3, pin: unknown, mfid: 3F02
2011/09/14 1:11:43 10920 r02 providers: 4 (8C,A0,A4,A8)
2011/09/14 1:11:48 10915 s client(1) connect from ..... (pid=10976, pipfd=16)
2011/09/14 1:11:48 10976 c01 encrypted newcamd:14000-client ....... granted (tsitsi, au=upc)
2011/09/14 1:11:48 10976 c01 user tsitsi authenticated successfully (CCcam)
2011/09/14 1:11:48 10976 c01 AU enabled for user tsitsi on reader upc
2011/09/14 1:11:48 10920 r02 provider: 1, id: 8C

tsitsi58 · Sep 13, 2011

the abobe log is for these configs

[global]
logfile = /tmp/oscam.log
cachedelay = 120
nice = -1
maxlogsize = 500

[monitor]
port = 988
nocrypt =
aulow = 120
hideclient_to = 15
monlevel = 4
appendchaninfo = 0

[newcamd]
port = 14000@0D02:00008C
key = 0102030405060708091011121314
keepalive = 1

[webif]
httpport =50005
httpuser = ......
httppwd = ......
httprefresh = 10
httpallowed = ........,192.168.0.0-192.168.255.255
httphideidleclients = 0
httpreadonly = 0
httpsavefullcfg = 0

user
[account]
user = tsitsi
pwd = saab
group = 1
au = upc
caid = 0D02
ident = 0D02:00008C

xXTomXx · Sep 13, 2011

2011/09/14 1:11:28 10915 s provid #0: 00008C

you need 0000A0.

tsitsi58 · Sep 13, 2011

i tried the settings of gulli
config
[global]
logfile = /tmp/oscam.log
cachedelay = 120
nice = -1
maxlogsize = 500

[monitor]
port = 988
nocrypt =
aulow = 120
hideclient_to = 15
monlevel = 4
appendchaninfo = 0

[newcamd]
port = 14000@0D02:00008C;0000A0;0000A4;0000A8
key = 0102030405060708091011121314
keepalive = 1

[webif]
httpport = 50005
httpuser = ......
httppwd = .......
httprefresh = 10
httpallowed = .......,192.168.0.0-192.168.255.255
httphideidleclients = 0
httpreadonly = 0
httpsavefullcfg = 0

user
[account]
user = .....
pwd = ......
group = 1
au = upc
caid = 0D02
ident = 0D02:00008C;0000A0;0000A4;0000A8

server
[reader]
label = upc
enable = 1
protocol = internal
device = /dev/sci0
pincode = 0000
caid = 0D02
services =
fix9993 = 0
detect = cd
mhz = 500
cardmhz = 500
ident = 0D02:00008C;0000A0;0000A4;0000A8
group = 1
emmcache = 1,3,2
lb_weight = 100

still shows
2011/09/14 1:24:13 12526 r02 ATR: 3B 78 12 00 00 54 C4 03 00 8F F1 90 00
2011/09/14 1:24:15 12526 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2011/09/14 1:24:16 12526 r02 [cryptoworks-reader] card detected
2011/09/14 1:24:16 12526 r02 [cryptoworks-reader] type: CryptoWorks
2011/09/14 1:24:19 12526 r02 type: CryptoWorks, caid: 0D00, ascii serial: 0, hex serial: 0000000000
2011/09/14 1:24:27 12526 r02 issuer: unknown, id: 00, bios: v3, pin: unknown, mfid: 3F02
2011/09/14 1:24:27 12526 r02 providers: 4 (8C,A0,A4,A8)
2011/09/14 1:24:32 12521 s client(1) connect from ..... (pid=12582, pipfd=16)
2011/09/14 1:24:32 12582 c01 encrypted newcamd:14000-client ....... granted (tsitsi, au=upc)
2011/09/14 1:24:32 12582 c01 user tsitsi authenticated successfully (CCcam)
2011/09/14 1:24:32 12582 c01 AU enabled for user tsitsi on reader upc
2011/09/14 1:24:33 12526 r02 provider: 1, id: 8C

tsitsi58 · Sep 13, 2011

you think i have to use only 0000A0.?

tsitsi58 · Sep 13, 2011

settings with only 0000AO SHOWS
2011/09/14 1:28:40 13096 s camd 3.5x: disabled
2011/09/14 1:28:40 13096 s cs378x: disabled
2011/09/14 1:28:40 13096 s newcamd: initialized (fd=10, port=14000, crypted)
2011/09/14 1:28:40 13096 s CAID: 0D02
2011/09/14 1:28:40 13096 s provid #0: 0000A0
2011/09/14 1:28:40 13096 s cccam: disabled
2011/09/14 1:28:40 13096 s radegast: disabled
2011/09/14 1:28:40 13096 s logger started (pid=13099)
2011/09/14 1:28:40 13096 s Resolver thread started
2011/09/14 1:28:40 13096 s http started (pid=13102)
2011/09/14 1:28:40 13096 s reader started (pid=13103, device=/dev/sci0)
2011/09/14 1:28:40 13096 s anti cascading disabled
2011/09/14 1:28:40 13096 s dvbapi: dvbapi disabled
2011/09/14 1:28:40 13102 h HTTP Server listening on port 50005
2011/09/14 1:28:41 13103 r02 card detected
2011/09/14 1:28:42 13103 r02 ATR: 3B 78 12 00 00 54 C4 03 00 8F F1 90 00
2011/09/14 1:28:44 13103 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2011/09/14 1:28:45 13103 r02 [cryptoworks-reader] card detected
2011/09/14 1:28:45 13103 r02 [cryptoworks-reader] type: CryptoWorks
2011/09/14 1:28:48 13103 r02 type: CryptoWorks, caid: 0D00, ascii serial: 0, hex serial: 0000000000
2011/09/14 1:28:56 13103 r02 issuer: unknown, id: 00, bios: v3, pin: unknown, mfid: 3F02
2011/09/14 1:28:56 13103 r02 providers: 4 (8C,A0,A4,A8)
2011/09/14 1:29:00 13096 s client(1) connect from ......(pid=13159, pipfd=16)
2011/09/14 1:29:00 13159 c01 encrypted newcamd:14000-client ........ granted (tsitsi, au=upc)
2011/09/14 1:29:00 13159 c01 user tsitsi authenticated successfully (CCcam)
2011/09/14 1:29:00 13159 c01 AU enabled for user tsitsi on reader upc
2011/09/14 1:29:01 13103 r02 provider: 1, id: 8C

tsitsi58 · Sep 13, 2011

I WILL BLOW UP LIKE A BALLOON I DONT KNOW WHAT TO DO

2011/09/14 1:29:52 13159 c01 tsitsi (0D02&0000C0/0906/C3:035D): rejected user ident (120 ms)
2011/09/14 1:30:04 13159 c01 tsitsi (0D02&0000C0/0906/C3

607): rejected user ident (121 ms)
2011/09/14 1:30:12 13159 c01 tsitsi (0D02&0000C0/0906/C3:2A3C): rejected user ident (121 ms)
2011/09/14 1:30:24 13159 c01 tsitsi (0D02&0000C0/0906/C3:AE00): rejected user ident (121 ms)
2011/09/14 1:30:31 13159 c01 tsitsi (0D02&0000C0/0906/C3:B1CA): rejected user ident (121 ms)
2011/09/14 1:30:41 13159 c01 tsitsi (0D02&0000C0/0906/C3:15A6): rejected user ident (121 ms)
2011/09/14 1:30:57 13159 c01 tsitsi (0D02&0000C0/0906/C3:40F6): rejected user ident (121 ms)
2011/09/14 1:31:05 13159 c01 tsitsi (0D02&0000C0/0906/C3:F587): rejected user ident (125 ms)

guli · Sep 14, 2011

try 1 ident after the other mate & restart . like i said in post 28 . like this .

all your idents .
ident = 00008C;0000A0;0000A4;0000A8

oscam.conf

[newcamd]
port = 14000@0D02:00008C
key = 0102030405060708091011121314
keepalive = 1

oscam.user

ident = 0D02:00008C

oscam.server

ident = 0D02:00008C

if this works ok if not delete in red & put next ident in & try again .

kindly do not blow up like a balloon mate , too early christmas is still a few months away lol .

oscam and dragocard upc

Registered

Registered

Registered

Registered

Registered

Registered

Registered

Registered

Registered

Registered

Registered

Registered

Registered

Registered

Registered

Registered

Registered

Registered

Registered

Registered