Method of Opening PowerVu Channels in Enigma2 Using Oscam

Bitman · Dec 6, 2017

satpong said:
All OK
some channels started on same transponder, now double SD channels.
open with same key, check new SIDs (0066,0067,0068,0069,006A,006C,006D)

AFN channels soon to HD.
http://myafn.dodmedia.osd.mil/afnhd/

Issue is with the new HD channels. It's noted that ones on IS18 have two ECM PID's in the stream (0E00 and 5604)

hisakatano · Dec 7, 2017

Hello I have Zgemma H7S and Powervu Issue

Hello I Have H7S Now
Use to Oscam and NCam by PowerVu
NO Stream Relay to open couple of channel
But Many Channel is Still Not open ??
What is Best Way to H7s ..
Thanks !!!

fthxtre · Dec 7, 2017

My DM800Se cannot open 113KU AFN with new version 11392 OScam.Anyone could help me?

mina007 · Dec 8, 2017

thnaks

sheBurns · Dec 11, 2017

113EKU(new AFN all in HD)

image: pli4
oscam: Changeset 11392 with Emu r762

This is the LOG i get in SID 0007(sports2)

The case of AFN Movies it's opposite audio is there but no video.

One thing i notice is in a split of seconds when oscam is trying to decrypt the channel using cache audio or video works but then freezes then goes back to no audio or video(AFN movies only)

Much appreciate if someone provide PR for this.

Code:

2017/12/11 10:11:54 5B75481C c      (ecm) dvbapiau (0E00@000000/0000/0007/91:2048AA5FBB34FFEA9F7E5BBA25224FEB): found (8 ms) by Emu
2017/12/11 10:12:00 5B75481C c   (dvbapi) Demuxer 0 stop descrambling program number 0007 (0E00@000000:0007 unknown)
2017/12/11 10:12:00 5B75481C c   (dvbapi) PMT6: Trying connect to enigma CA PMT listen socket...
2017/12/11 10:12:00 5B75481C c   (dvbapi) PMT6 CA PMT Server connected on fd 7!
2017/12/11 10:12:05 5B75481C c   (dvbapi) Demuxer 0 ecmpid 0 CAID: 5604 ECM_PID: 0BBD PROVID: 000000 
2017/12/11 10:12:05 5B75481C c   (dvbapi) Demuxer 0 ecmpid 1 CAID: 0E00 ECM_PID: 1775 PROVID: 000000 
2017/12/11 10:12:05 5B75481C c   (dvbapi) Demuxer 0 found 2 ECMpids and 4 STREAMpids in caPMT
2017/12/11 10:12:05 5B75481C c   (dvbapi) Demuxer 0 found channel in cache and matching prio -> start descrambling ecmpid 1 
2017/12/11 10:12:05 5B75481C c   (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 0E00 PROVID 000000 ECMPID 1775 ANY CHID PMTPID 138F VPID 067C
2017/12/11 10:12:05 5B75481C c      (ecm) dvbapiau (0E00@000000/0000/0007/91:B5258927FD60CBC33A4CF7DE81D411B0): found (12 ms) by Emu
2017/12/11 10:12:05 5B75481C c   (dvbapi) Demuxer 0 found 2 ECMpids and 4 STREAMpids in PMT
2017/12/11 10:12:05 5B75481C c      (ecm) dvbapiau (0E00@000000/0000/0007/91:81875C566E0483013928E99D7C1E4043): found (13 ms) by Emu
2017/12/11 10:12:14 5B75481C c      (ecm) dvbapiau (0E00@000000/0000/0007/91:05C0CFA9AA8D227D175312C7DD7D8524): found (25 ms) by Emu
2017/12/11 10:12:24 5B75481C c      (ecm) dvbapiau (0E00@000000/0000/0007/91:C873624F9E9E2983D208F961C5E4C7C7): found (8 ms) by Emu

eaglevision993 · Dec 11, 2017

Hi,
I got the AFN channels with the new SIDs running via stream relay.
But do I need to update the configs/Softcam to enable Autoroll on the new SIDs?

I use a VU+ with oscam 11281.

Thanks and best regards

Rickk · Dec 11, 2017

no, you only have to adjust the group id

P 009E000B 00 00000000000000 # HD SPORTS(AFN), old
P 009E000B 01 00000000000000 # HD SPORTS(AFN), old
P 009E0068 00 00000000000000 # HD SPORTS(AFN), NEW
P 009E0068 01 00000000000000 # HD SPORTS(AFN), NEW
P 009E 004XXXXX D3XXXXXXXXXXF3 ; EMM Key

eaglevision993 · Dec 11, 2017

Great, thanks I will update my Softcam and see what happens when they transit tonight at 00:00.

Do I also need a new EMM key? If so a PM would be great!
Thanks
Ben

Rickk · Dec 11, 2017

we will see

eaglevision993 · Dec 11, 2017

AFN transition in progress. Most channels are on air and working again.

eaglevision993 · Dec 12, 2017

Hmm I get video on all AFN HD channels but no audio except on AFN Movie. This channel works fine.... Any ideas?

marrakr · Dec 12, 2017

See http://www.sat-universe.com/showthread.php?p=2036850886&posted=1

master-magic · Dec 14, 2017

now working on my gigablue box with new softcam key from 13 december made,
with this in Oscam:

[streamrelay]
stream_relay_enabled = 0

first time it work on this box, other people say it don't work but for me all channels work with audio and picture.

Robinson74 · Dec 14, 2017

master-magic said:
[streamrelay]
stream_relay_enabled = 0

How shall we now use this parameter if only some PowerVU channels are now opened without it, if I understand it correctly?
Should it stay at 1? How to distingusih between such channels?

master-magic · Dec 14, 2017

Robinson74 said:
How shall we now use this parameter if only some PowerVU channels are now opened without it, if I understand it correctly?
Should it stay at 1? How to distingusih between such channels?

this works very good for the AFN channels on 9 east,
the channels on 1 west I don't get them, only some channels on 1 west,
like AMC,Antenne1-3,boomerang,and other channels, not the discovery channels :mecry:

hibees09 · Dec 14, 2017

can someone post oscam config files/channel list for new afn?

rakrak · Dec 17, 2017

PowerVU Solo4K

Please help me.

At VU + Solo4K in VTI try to work with PowerVU but always error: (dvbapi) ERROR: ioctl (CA_SET_DESCR): Invalid argument

PHP:

(dvbapi) Demuxer 0 ecmpid 0 CAID: 0E00 ECM_PID: 177E PROVID: 000000 
(dvbapi) Demuxer 0 found 1 ECMpids and 7 STREAMpids in caPMT
(dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 177E ANY CHID PMTPID 03E0 VPID 0384
(dvbapi) ERROR: ioctl(CA_SET_DESCR): Invalid argument
(-) -- Skipped 1 duplicated log lines --
(-) -- Skipped 5 duplicated log lines --
(ecm) linuxsatsupport (0E00@000000/0000/0386/40:7430A7162CEA5D94EADFAA1A31ECB932): found (2 ms) by emulator
(dvbapi) ERROR: ioctl(CA_SET_DESCR): Invalid argument
(-) -- Skipped 6 duplicated log lines --
(ecm) linuxsatsupport (0E00@000000/0000/0386/40:D8A29C388F27D1FB329E37671198C87C): found (59 ms) by emulator
(dvbapi) Demuxer 0 found 1 ECMpids and 7 STREAMpids in PMT
(dvbapi) ERROR: ioctl(CA_SET_DESCR): Invalid argument
(-) -- Skipped 6 duplicated log lines --
(ecm) linuxsatsupport (0E00@000000/0000/0386/40:82ECE04AA16CC3C7CD77452FE7C5915E): found (2 ms) by emulator
(dvbapi) ERROR: ioctl(CA_SET_DESCR): Invalid argument
(-) -- Skipped 6 duplicated log lines --
(ecm) linuxsatsupport (0E00@000000/0000/0386/40:82ECE04AA16CC3C7CD77452FE7C5915E): found (2 ms) by emulator
(dvbapi) ERROR: ioctl(CA_SET_DESCR): Invalid argument

I do not know where the error might be, please advice. Sorry for my English and thank you.

marrakr · Dec 17, 2017

You can ignore this error it is not important. And PV should work. Look for issue something else. What channel are you tring to open?

medousa89 · Dec 17, 2017

rakrak said:

Please help me.

At VU + Solo4K in VTI try to work with PowerVU but always error: (dvbapi) ERROR: ioctl (CA_SET_DESCR): Invalid argument

PHP:

(dvbapi) Demuxer 0 ecmpid 0 CAID: 0E00 ECM_PID: 177E PROVID: 000000 
(dvbapi) Demuxer 0 found 1 ECMpids and 7 STREAMpids in caPMT
(dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 177E ANY CHID PMTPID 03E0 VPID 0384
(dvbapi) ERROR: ioctl(CA_SET_DESCR): Invalid argument
(-) -- Skipped 1 duplicated log lines --
(-) -- Skipped 5 duplicated log lines --
(ecm) linuxsatsupport (0E00@000000/0000/0386/40:7430A7162CEA5D94EADFAA1A31ECB932): found (2 ms) by emulator
(dvbapi) ERROR: ioctl(CA_SET_DESCR): Invalid argument
(-) -- Skipped 6 duplicated log lines --
(ecm) linuxsatsupport (0E00@000000/0000/0386/40:D8A29C388F27D1FB329E37671198C87C): found (59 ms) by emulator
(dvbapi) Demuxer 0 found 1 ECMpids and 7 STREAMpids in PMT
(dvbapi) ERROR: ioctl(CA_SET_DESCR): Invalid argument
(-) -- Skipped 6 duplicated log lines --
(ecm) linuxsatsupport (0E00@000000/0000/0386/40:82ECE04AA16CC3C7CD77452FE7C5915E): found (2 ms) by emulator
(dvbapi) ERROR: ioctl(CA_SET_DESCR): Invalid argument
(-) -- Skipped 6 duplicated log lines --
(ecm) linuxsatsupport (0E00@000000/0000/0386/40:82ECE04AA16CC3C7CD77452FE7C5915E): found (2 ms) by emulator
(dvbapi) ERROR: ioctl(CA_SET_DESCR): Invalid argument

I do not know where the error might be, please advice. Sorry for my English and thank you.

You have problem with drivers for extended CWs (without stream relay ) and config is extended_cw_api = 1

rakrak · Dec 17, 2017

medousa89 said:
You have problem with drivers for extended CWs (without stream relay ) and config is extended_cw_api = 1

Thanks, config I overwrite and PU works. I've tried this setting before, but probably the old bin. Livelog now writes 3*line the ERROR, but I probably do not have to deal with it.

Method of Opening PowerVu Channels in Enigma2 Using Oscam

Bitman

hisakatano

Member

fthxtre

mina007

sheBurns

eaglevision993

Registered

Rickk

Registered

eaglevision993

Registered

Rickk

Registered

eaglevision993

Registered

eaglevision993

Registered

marrakr

Registered

master-magic

Robinson74

Registered

master-magic

hibees09

Registered

rakrak

marrakr

Registered

medousa89

Registered

rakrak