newcs 1.67 & N3 Tivusat, is working or not

kallquk

Registered
Messages
43
Hello,

I am trying to read this card with newcs.i686.usb in centos 32 bit old laptop.

[ 14:09:10 ] [ Box detect ] Box type 1 (General Boxtype - Generic)
[ 14:09:10 ] [ Config ] Value in <rsa> for device 0 (tvs) is INVALID, skipping...
[ 14:09:10 ] [ Config ] Pincode for device 0 (tvs): 0000
[ 14:09:10 ] [ Config ] /dev/ttyUSB0 ECM priority: round
[ 14:09:10 ] [ httpd ] httpd-user: xxxx, password: yyyy, accesslevel: admin
[ 14:09:10 ] [ EMM Cache ] Initialising dynamic Cache
[ 14:09:10 ] [ ECM Cache ] Initialising dynamic Cache
[ 14:09:10 ] [ Loader ] Starting Telnet on port 1001
[ 14:09:10 ] [ Loader ] Started HTTP-server on port: aaaaa
[ 14:09:10 ] [ Loader ] Reader type 2 on node /dev/ttyUSB0
[ 14:09:10 ] [ Phoenix ] Opening device /dev/ttyUSB0
[ 14:09:10 ] [ Phoenix ] Setting Parity to: NONE
[ 14:09:10 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyUSB0
[ 14:09:10 ] [ Phoenix ] Setting Baud to standard 9600
[ 14:09:11 ] [ Phoenix ] Normal RESET on node /dev/ttyUSB0
[ 14:09:13 ] [ ATR ] T=1 1etu=8.68us Guardtime:11etu CWT:139etu BWT:15371etu WWT:153600etu
[ 14:09:13 ] [ ATR ] Historical bytes: T I G E R 0 0 3 R e v 2 5 0
[ 14:09:13 ] [ Loader ] Init Nagra card
[ 14:09:13 ] [ Phoenix ] Setting Parity to: ODD
[ 14:09:13 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyUSB0
[ 14:09:13 ] [ Phoenix ] Setting Baud to standard 115200
[ 14:09:20 ] [ Loader ] Card 1800 on port /dev/ttyUSB0 failed
[ 14:09:20 ] [ Loader ] Starting Newcamd Server on port bbbbb
[ 14:09:20 ] [ Newcamd ] Newcamd thread Server started on port 12347
newcamd: main loop
[ 14:09:20 ] [ Loader ] Reinit card with caid 1800
[ 14:09:20 ] [ Loader ] Reader type 2 on node /dev/ttyUSB0
[ 14:09:20 ] [ Phoenix ] Opening device /dev/ttyUSB0
[ 14:09:20 ] [ Phoenix ] Setting Parity to: NONE
[ 14:09:20 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyUSB0
[ 14:09:20 ] [ Phoenix ] Setting Baud to standard 9600
[ 14:09:21 ] [ Phoenix ] Normal RESET on node /dev/ttyUSB0
[ 14:09:22 ] [ ATR ] T=1 1etu=8.68us Guardtime:11etu CWT:139etu BWT:15371etu WWT:153600etu
[ 14:09:22 ] [ ATR ] Historical bytes: T I G E R 0 0 3 R e v 2 5 0
[ 14:09:22 ] [ Loader ] Init Nagra card
[ 14:09:22 ] [ Phoenix ] Setting Parity to: ODD
[ 14:09:22 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyUSB0
[ 14:09:22 ] [ Phoenix ] Setting Baud to standard 115200


It stops at this point, I can kill the newcs from another ssh window, only. At this moment the first windows is usable.

As you can see rsa is not accepted, but it is a well known for those that own a card like this
The rsa works in oscam, I copy-pasted from oscam. May need it in another format ?

I tried phoenix and smartreader type, with the same result.

Does somebody know if this card works with newcs and if yes how ?

thanks in advance
regards
 
Last edited:
Top