NewCS Dm800Se

Soap_77

Registered
Messages
9
I´m trying to install newcs on my DM800se.
It get installed and is up and running, but I cannot connect to it locally or from another box on my network.

I´m using newenigma2 (gemini) and installin the cams through bluepanel.

Using default configs ( edited for username and adresses of course)

I have used newcs and mgcamd on my prvious boxes (500 & 600), therefore I´d like to use it on my 800 as well.
 

Brummie

Staff member
Administrator
Messages
5,794
have you checked the permissions on the files newCS.bin needs to be 755 and make sure the config directory is 755 then the newcs.xml 644
 

Brummie

Staff member
Administrator
Messages
5,794
have you checked that your readers are ok on your 800se the first batch had a card reader prob, i am using edge nemesis svn 93 and newCS works ok on this image i used it for my tring card
 

Soap_77

Registered
Messages
9
The box can connect with Mgcamd to another server on the network.

I tried with CCcam and it works just fine locally on the machine. So the cardreader is working.

I´m using default newCS config, and it refers to help.txt, but there are no such file! ;)

Can you post your newcs config?

I just reinstalled ALL cams and when I look at "owner" using ftp it says owner 1000 instead of user 0
chown to "0" didn´t help.
 

Brummie

Staff member
Administrator
Messages
5,794
this is my config for a tring card

<?xml version="1.0"?>
<newCSconfig>
<globals>
<!-- valid value for listening-ip are:
IPv4 adress of local interface. -->
<listening-ip>127.0.0.1</listening-ip>
</globals>
<readers name="Dreambox SCI">
<device>
<name>SCI Lower Slot</name>
<type>sci</type>
<mhz>358</mhz>
<node>/dev/sci0</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<blockC0>Yes</blockC0>
<carddetect>Yes</carddetect>
<newcamd_port>15050</newcamd_port>
<autosid>Yes</autosid>
<boxkey>0000</boxkey>
<pincode>1234</pincode>
<priority>round</priority>
<protectedsid>
<id>022b</id>
</protectedsid>
</device>
<device>
<name>SCI Upper Slot</name>
<type>sci</type>
<mhz>358</mhz>
<node>/dev/sci1</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<blockC0>Yes</blockC0>
<carddetect>Yes</carddetect>
<newcamd_port>15050</newcamd_port>
<autosid>Yes</autosid>
<boxkey>0000</boxkey>
<pincode>0000</pincode>
<priority>round</priority>
</device>
</readers>
<radegastserver>
<enabled>Yes</enabled>
<port>10001</port>
<allow>
<hostname>localhost</hostname>
</allow>
</radegastserver>
<cache>
<emm>20</emm>
<ecm>-1</ecm>
</cache>
<httpd>
<server>
<port>8080</port>
<enabled>yes</enabled>
</server>
<user>
<name>newcs</name>
<password>newcs</password>
<accesslevel>admin</accesslevel>
</user>
</httpd>
<debug>
<password>NewCSpwd</password>
<mode>simple</mode>
<level>internal</level>
<type>all</type>
<output>console,tcp</output>
<tcp_port>1001</tcp_port>
<tcp_options>normal,init</tcp_options>
</debug>
<newcamdserver>
<enabled>Yes</enabled>
<name>newcs</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<user>
<name>Dream</name>
<password>Elite</password>
<au>on</au>
<sidoverride>off</sidoverride>
<spider>No</spider>
<cardlevel>1</cardlevel>
</user>
</newcamdserver>
<chameleon2>
<server>
<port>1234</port>
<enabled>yes</enabled>
<realm>myShares</realm>
</server>
<peer>
<hostname>remote</hostname>
<port>1234</port>
<name>myname</name>
<password>mypassword</password>
<realm>myShares</realm>
</peer>
<user>
<name>myname</name>
<password>mypassword</password>
<realm>myShares</realm>
</user>
</chameleon2>
</newCSconfig>

dont forget the N: line in your ccam cfg
N: 127.0.0.1 15050 Dream Elite 01 02 03 04 05 06 07 08 09 10 11 12 13 14
 

Soap_77

Registered
Messages
9
I got it working locally, but I cannot connect to it from outside the box!.

A step in the right direction!
 

Brummie

Staff member
Administrator
Messages
5,794
should be able to connect from outside with CCCam from another box in the same house use the ip of the 800se with the card in it.

example
C: 192.168.0.5 12000 user password
box with card
F: user password 2 0 0 { 0:0:1 }
 

Soap_77

Registered
Messages
9
problem solved!

Code:
<readers name="Dreambox SCI">
<device>
<name>SCI Lower Slot</name>
<type>sci</type>
<mhz>358</mhz>
<node>/dev/sci0</node>

DM800 SE has the readers in opposite position!
sci0 = upper slot!

Hope that someone else can find this useful.
 

CarbonCopy

Registered
Messages
3
Hi friend.
I'm very confused on trying to install newCS on my DM800SE. I could see you got this sucessfully in 2011.

I'm thinking if you may help me on this. I'm using OpenPLI 2.14 and trying to install a home cardsharing system for my others boxes, locally only.

But no success so far.

Thanks in advance.

Best Regards.
 

CarbonCopy

Registered
Messages
3
Posting here as I can't send private messages yet...


Hi, thanks for your reply.

First... I'm newbie in cardsharing so I'm not pretty sure I'm doing... :)

My current scenario is: I have 2 DVB-C Lexuzbox boxes and recently acquired a DM800SE (DVB-C too)to try do build my personal CS home server, because the current CS paid servers I'm using are not reliable (they freeze a lot)and are a little expensive.

Although I use CCCam on DM to get the shares on my paid CS servers, I've heard I can't use it to read and share my card keys because Lexuz boxex use newcamd protocol. Then I've found a lot of material on net saying NewCS does serve the keys using newcamd, so I just choose this way...

My cable carrier card is a Nagravision encrypted card, I don't know the brand, if Ive understood you question. I can scan a picture and attach if u want.

I've never tryed to use CCCam to read the card.

After you reply I'm thinking about OSCAM. Do u think it can do the job better?

Once again, thank u very much for your reply and for any future assistance in advance.

Regards,



xxxxxxxx said:
Hi.

... and why you need to use old NewCS?

You have what card in cardslot?

CCCam can't read this card?

OScam or OSCam-ymod can't read this card?

CCCam can reshare cccam protocol only,
OSCam can reshare cccam and/or newcamd protocol.
 
Top