bozomustafa_68
Well Known Member
- Messages
- 16,935
OPENBOX_s9_avatarcam.
SetEditHD100
Version 1.22
-You can add, 32 favorite groups
Hello, the software is being tested, you would not crack?
given that since version 1.20 has the fix for openbox S9, how can I use the most?
thanks
deep_c2ds2_cmt_1112130641
processing firmware is s10 of matching s9 13/12/2011
MENU is already open for s9
To get to the network settings you must enter the menu and remote control 4x6 then punish the Network Setup!
To get to
CCcam Client Setup-4x0
MG CAMD Setup Plug-4x0
Newcamd Server Setup-4x0
After turning off the remote control box on display shows off that does not go out and probably does not enter into standby for no LED is off or the clock instead of which I can not run. When you press the POWER button on the remote control appears on the display ON BOOT box and then starts up normally.
For Clone Openbox / Skybox S9
September version with Clone TimeBomb Disabled and some other fix .
Fixed by anonymouSX 5 jan 2012
fixed Timebomb kill clone
Id detection fixed
Reboot probleme fixed
Cccam lag freeze Fixed
Standby Freeze issue Fixed
Power on Message on Display Changed
i need your feedback so you know where i'm
AnonymouSX developer on forum.Ouedkniss.com
thanks to EliteForce helped me to understand cpu ali 3602
World First Firmware hacked for Openbox S9 ali 3602 .
all futur release on forum.Ouedkniss.com
Best Regards
AnonymouSX
For Clone Openbox / Skybox S10 CCCAM SOftcam Mediaplayer Mkv AVI VOB ect.. support
New GUI menu Red Version with Clone TimeBomb Disabled and some other fix .
This Version Make the Original Openbox Firmware cheaper Welcome In 2012 .
Version AnonymouSX V2 FOR S9/S10/S11
Fixed by anonymouSX 02 feb 2011
fixed Timebomb kill clone
Id detection fixed
Reboot probleme fixed
Cccam lag freeze Fixed
Standby Freeze issue Fixed
Power on Message on Display Changed
AnonymouSX developer
thanks to EliteForce helped me to understand cpu ali 3602
Special thanks to my friend satsonne for this bitmap design
Thanks to my Beta Tester's mbtexascity and ipsgyn
You can support me i need some stuff for making new Firmware's .
Best Regards
With love AnonymouSX
Openbox S9 software
INET_HD_s12_PVR
works with S9
new s9 fiirm C2DS2_CMT_120620044F
MAIN FEATURES
1. Receive Digital High Definition (HD) and Standard Definition (SD) Satellite Signal
2. Supports DVB-S, DVB-S2, MPEG-2 & MPEG-4
3. Digital Video Recorder through USB (external flash or hard drive are not included)
4. The most affordable FTA HD receiver on the market today.
5. Worldwide compatible
6. Hardware Blind Search DVB-S and DVB-S2 (fast search less than 2 Minutes on most satellites)
7. Linux MIPS Operating System
8. STB main IC solution is ALI , demodulator model is M3501 from Ali
9. HD DVB-S2 SHARP 7306 Tuner
10. Multilingual support on screen menu (OSD): English, French, Deutsch, Italian, Spanish, Swedish, Danish, Greece, Portuguese, Finland, Holland, Turkish, Czech
The first thing to do is save the downloaded firmware file on a USB flash disk.
Plug USB disk to the back of your receiver. It will be recognized by the receiver.
1. Before upgrade, do a Factory Reset:
* Go to TOOLS menu and click on Factory Settings
* Click Yes to continue. The receiver will go to factory default and restart.
2. Upgrade Firmware:
* Click on MENU and go to TOOLS menu again
* Scroll down to "Upgrade by USB"
* Click on START
* After the loading is completed, Accept the upgrade.
* The receiver will restart.
3. After upgrade, do another Factory Reset:
* Go to TOOLS menu and click on Factory Settings
* Click Yes to continue. The receiver will go to factory default and restart.
Europe-S9_S10_S11_S12-20120801 AnonymouSX V2B: 0481
problem with
TP_PROG.dbs when booting from flash. It is better to pour on the
toolom competence in ABS.
OR MY bakup
HDS2_DUMP_TELEKARTA_STANDART_85e_AnonymouSX
S9 3 days for normal flight. In no clone did not test.
gracias a AnonymouSX