how can i check ip of my dream500s

A

aatee

Registered
Messages
435
friends,
i want to check working ip of my dreambox500s,
but i don,t have any idea about it, will u can help me regarding this issue,
i want to bring issue infront of u,
presently, i had uploaded edg enemesis latest image with 2.1.3 cccame version,
after uploaded image my dreambox worked well,than i tried to change its skin ,
i had downloaded its skin with through downloads addons option,
after download of skin, i gave my box to install skin command,
after that command my dream goes to dead,
its green light goes on and its remote is not working,
my box is not going to standby mode also (my means box is not going to red light),
i tried to upload new image through flashwizard but messege comes that your ip is invalid,(i was using 192.168.0.5) ip,which is now changed automatically which i don,t know, which will be in my box.
i tried also through dreamup loader to upload a new image but it stops after this messege
= :upload completed,waiting for acknowledge:=
with dreamup loader it is also not accepting any iamge.
can u people help me regarding my dream ip .
which will be that.
any programme which trace ip of dream.
ur help will be much appreciated.
thanks.
 
Last edited:
B

Brummie

Staff member
Administrator
Messages
5,794
sounds like you may have over loaded the var file, you may have to reflash it with dreamup and a serial null modem cable

make sure you use the latest version of dreamup
 
Ferret

Ferret

Marching On Together !
Staff member
Administrator
Messages
17,542
If your Dreambox is not responding to the remote then chance are the network will be down only way is to flash with Dreamup.

Make sure you have correct com port selected.



Ferret
 
A

aatee

Registered
Messages
435
Brummie said:
reflash it with dreamup and a serial null modem cable

make sure you use the latest version of dreamup
Click to expand...

i am using rs232 cable for dreamup loader,
for flashwizard i am using lan cable(networking cable)
i don,t have any idea about serial null cable,will u explain it,
what is serial null cable?
and i had used both latest version and very old version of dreamup.
 
Ferret

Ferret

Marching On Together !
Staff member
Administrator
Messages
17,542
Also referred to as a null modem cable. For use with the serial port on the rear of your Dreambox

Ferret
 
A

aatee

Registered
Messages
435
Ferret said:
If your Dreambox is not responding to the remote then chance are the network will be down only way is to flash with Dreamup.

Make sure you have correct com port selected.



Ferret
Click to expand...
my doubt also went to com port side,
due to this i had checked my rs232 cable on com port1 with other receiver(neosat1600+ and echolink700),
on which my rs232cable and com port is working.
i am watching cccame sharing on echolink at the moment with rs232 and com port1.
 
Ferret

Ferret

Marching On Together !
Staff member
Administrator
Messages
17,542
So you can not get a connection to the Dreambox with a serial cable and the latest DreamuP?

Is this what your saying?

Ferret
 
Ferret

Ferret

Marching On Together !
Staff member
Administrator
Messages
17,542
Are you using a USB to serial adapter? These can cause problems with DreamUP

You say rs232 cable is this the same cable you flash firmware to the Echolink with ? If so that is a null modem cable.

Ferret
 
A

aatee

Registered
Messages
435
Ferret said:
Are you using a USB to serial adapter? These can cause problems with DreamUP

You say rs232 cable is this the same cable you flash firmware to the Echolink with ? If so that is a null modem cable.

Ferret
Click to expand...
when i use dreamup,
i removed lan cable and usb from my pc and after it i use dreamup.
 
Ferret

Ferret

Marching On Together !
Staff member
Administrator
Messages
17,542
aatee said:
when i use dreamup,
i removed lan cable and usb from my pc and after it i use dreamup.
Click to expand...

Are you using a USB to serial port adapter on your PC?

The Rs232 cable you use on your echolink! Do you flash firmware to the echo link with this?

Ferret
 
A

aatee

Registered
Messages
435
Ferret said:
Are you using a USB to serial port adapter on your PC?

The Rs232 cable you use on your echolink! Do you flash firmware to the echo link with this?

Ferret
Click to expand...
yes my friend,
i had flashed echolink with rs232 ,working fine.
and what is serial port adopter?
will u explain it?
 
Last edited:
Ferret

Ferret

Marching On Together !
Staff member
Administrator
Messages
17,542
aatee said:
yes my friend,
i had flashed echolink with rs232 ,working fine.
and what is serial port adopter?
will u explain it?
Click to expand...

It converts USB to a serial port on your PC, obviously you are not using one which is good.

Turn off the power to your Dreambox and leave it for a couple of hours then use you rs232/null cable and dreamup to reflash with.

Guide here

http://www.sat-universe.com/showthread.php?t=132626

latest DreamUP here

http://www.sat-universe.com/showthread.php?t=91471

Ferret
 
E

edcasi

Registered
Messages
144
Seems to me that if the green light is on and remote not working, you might have the leds iside the dreambox misaligned.
Try opening the box and with the front cover off, see if the remote works, If it works realign the leds with the holes in the front cover.
PS. Take all precautions agaist electrical shock, do not thouch the DB while it is connected to the mains.
 
A

aatee

Registered
Messages
435
edcasi said:
Seems to me that if the green light is on and remote not working, you might have the leds iside the dreambox misaligned.
Try opening the box and with the front cover off, see if the remote works, If it works realign the leds with the holes in the front cover.
PS. Take all precautions agaist electrical shock, do not thouch the DB while it is connected to the mains.
Click to expand...

ok friend,
i will do this trick also tomorrow and will reply after check,
thanks
 
A

aatee

Registered
Messages
435
thanks God ,
friends,i had goted success,
now my dreamb0x500s(envision ) is recovered back.
working fine with gbox & cccame sharing.
bundle of thanks to all those friends who helped me for solving this issue.................thanks
 
D

dikush

Registered
Messages
18
But how did you succeed because I am experiencing the same problem with my dm500, dreamup500 gives gives me a "upload completed waiting for acknowledge" and stays there: Similar problem when using dreamup universal.
Did you Jtag?
 
You must log in or register to reply here.
Top