HDTV-Receiver Smart MX04 HDCA mit USB und RAPS
EUR 119,90
Firmware here
Code:
Features des ALi M3602
Embedded high performance CPU
Support DDR SDRAM
Support serial / parallel flash
DVB-CSA de-scrambler supported
CI interfaces supported
Smart card interfaces
MPEG-2 MP @ HL video decoder
H.264 video decoder [email protected]
JPEG decoding accelerator
Build-in DVI and HDMI
USB host interface
Parallel ATA interface for hard-disk devices
Power down control
The receiver's automatic programming system RAPS received this year's "PLUS X AWARD" for outstanding ease of use.
Technical Data Smart MX04 HDCA:
- HDMI Output
- 5000 TV and radio channels
- DiSEqC Support
- Pre-programmed Astra, Hotbird, Türksat
- 8 favorite lists
- USB interface
- Digital Audio Output: coax
- Scart connection
- Accessories: Remote control, batteries, manual
- Dimensions (WxHxD): 260 x 50 x 220 mm
Specifications:
LNB and Tuner input
F female to IEC 169-24
Frequency Range 950 MHz ~ 2150 MHz
Input level range -65 dBm to -25 dBm
LNB power supply 13/18V, max. 400 mA
LNB-Control signal 22 kHz, 0 / 12 V
DiSEqC Control DiSEq full support
Demodulator
Front-end module, QPSK, 8PSK
Input data rate of 2 MS / s to 90 MS / s
System Resources
333 MHz processor
SDRAM 2PCS 32 × 16Mbit/64Mbyte DDRs
FLASH 1PC 16MBit/2MByte
Video Decoder
Video Resolution (Video Format) 1920 x 1080 1280 x 720, 720 x 480
Aspect Ratio 4:3, 16:9
Remote Control
Range up to 7 m
2x AAA batteries
PSU
Power consumption max. 30 W
Standby power consumption below 1 W
[COLOR="Red"]RAPS
[/COLOR]
PLUS X AWARD
The Automatic Receiver Programming System RAPS was established in May 2009 with the prestigious Plus X Award. The prize went to the system for its ease of use.
RAPS is the ultimate programming system for your digital satellite receiver, after a short preset, you can forget everything else.
EUR 119,90
Firmware here