EVOLUTION-ufs922-e2-FLASH-1303-GoForIt

Status
Not open for further replies.

juli13

Staff member
Administrator
Messages
10,198
Code:
	flash is easy: 
stick with fat32 format 
to create folder: 
/ kathrein/ufs922 
therein save the *. img and updatescript.sh 
ufs922 off 
stick forward purely 
Switch 
Record button (left button under frontusb) gedrückhalten until something like this ... "utp2" appears in the display 
then briefly stop button (right button on frontusb) press. 
and reflashing 
Total duration approximately 10 minutes, 

anything more about this in the enclosed readme! 

swapram has been disabled because of a technical error exists in ufs922. 
It is therefore recommended swappart or swapfile to use (default: swapoff) 
with default swapoff is no teletext, ts, record! 

Just for swapfile on the media partition to create a folder named: swap to put swapfile on, off, on, done. telnet: Free should now show when swap not 0 more! 

epg for saving to hdd there a folder: epg create and put it on usb / hdd epg save the setup! 

for the record, ts, etc., as usual folder on the media partition (sda5 create): 
mp3 
Record 
picture 
timeshift 
own_movies 
.... 

more infos about this gives you the var / etc / automount.ini 

as the orig mediapartiton only has 10gb is little space for recording and mp3. 
It is recommended the ENTIRE hdd partitonieren re using fdisk (in e2), and format to include all newly created partitions to ext2. 
fdisk is self-kan, and you can format as follows: 
mkfs.ext2-L XSYS1 / dev/sda1 
mkfs.ext2-L XSYS2 / dev/sda2 
mkfs.ext2-L XSYS3 / dev/sda3 
mkswap / dev/sda4 

-L is the label name that defines how the hdd to mount by label in parts of mnt / usb appears. they are freely chosen but must be identsich nich! 

one uses ne swappart (sda4 in the example) you can then also on swappart in evo-setup ask. 

shall be the timeshift hdd so new to it there as described above, the folder, epg, record, swap .... Create 

mtd aufteilung the newly revised (kernel bigger, smaller root, var is unchanged) 
are now included in kernel: 
ext2, ext3, fat, vfat, nfs, msdos, cifs, fuse, smb, ntfs (read only), pl2303, ftdi, usbserial, nfsd ... 

the corresponding module will therefore no longer needed 

will again be back to orig then this is also possible in the same way! 
This notfallimg-orig will, however, only to turn out human desire of staff to disclose the condition of the NON-DISCLOSURE 3rd at the moment! 

Many many thanks to TDT for the base image 
riesendankeschön solala to create one for the update script 
a fat thx to obiwan, nit, max for the support for the Realization of the flash images and test it!
 

marce

VIP
Messages
7,115
EVOLUTION-ufs922-e2-FLASH-1303-GoForIt




Code:
FIRST FLASH IMAGE UFS-922!
YOUR ONE TRUE HABT ... FOR FLASHRAM IN UFS922 NOT FOR HDD!
[COLOR="Red"][B]RC3-FIX upped from 12.25, 29.08.2009[/B][/COLOR]

Thx pinky1981
 
Status
Not open for further replies.
Top