Hi,
I don't think your LAN cable is crossover, you can easy see if is or not.
Please place both plugs with teethes up and away from you, first teeth from left on the left plug should go to the third teeth on the second plug and second to sixth, basically pins from 1 to 3 and 2 to 6 are interchanged from one plug to other when the cable is crossover.
If is not an crossover cable you need to use two cables and a switch in order to benefit of DreamUP http mode.
Starting and Stopping the DM could create a lot of temporary files on your internal flash, so one cause could be the lack of free space on your flash for mounting /dev and /proc file systems.
Also could determine filesystem inconsistency which could be automatically repaired, not sure if DM has that type of checks during boot time, something alike scandisk on windows, which start automatically at boot time when the PC is not properly shut down.
If it has, this operation could take few minutes to several tens, let it overnight started.
My suggestion, is to try to connect your DM with two LAN cables through switch and test agin DreamUP to see if it finalize starting http service.
If you cannot manage to start http service with LAN cables conected the only way to see what happen with your DM is to have an hyperterminal session connected to your current COM port instead of DreamUP and see all boot process output via hyper-teminal, copy and paste all output of the hyper-terminal here please if you don't understand what is there.
HyperTerminal an windows app which should be downloaded and set/started before powering up the DM.
Best regards,
Marc
Hi Marc,
I have controlled, this is not a crossover cable.
I will buy one. I've downloaded hyper terminal. and first hyperTerminal started and then connected to DM800. I see very strange letters like this:
{è@ ü´øþm( ùø
øüDBþüú?üî-þùÀþüÄŒûaáøæ)`þ
I start drambox then hyper terminal shows these letters . after 1 or 2 second the red LED of DM800 is off and H.terminal also stop work
you say : My suggestion, is to try to connect your DM with two LAN cables through switch and test agin DreamUP to see if it finalize starting http service.
would you please post a pic,
how can two countries Ethernet cables connect to each other
thanks for everything, you think with me about this problem together
and sorry for my bad english (google translator)