- Messages
- 29,889
Ncam 8.8 compiled and patched by marouan & READ
-Improvements emu
-clean implementation of the card list
-(rarely used modules are set from default on to default off (no codechange just setup switch))
-fix reset to wrong defaults
-[nemu] Changed function declaration to a more clean way
-[streamserver] Improved Compel algorithm
(Picture is more stable now with minimum glitches only at key change (every ~53 seconds). The teletext pid is also descrambled now)
-Improvements emu
-clean implementation of the card list
-(rarely used modules are set from default on to default off (no codechange just setup switch))
-fix reset to wrong defaults
-[nemu] Changed function declaration to a more clean way
-[streamserver] Improved Compel algorithm
(Picture is more stable now with minimum glitches only at key change (every ~53 seconds). The teletext pid is also descrambled now)
- Messages
- 29,889
Ncam 9.0 compiled and patched by marouan & READ
-[powervu] Added support for hash mode 30
-insert hd03 and hd04 atr
-[dvbapi + powervu] Properly set the descrambler mode for CSA
(When watching a DES powervu channel, switching back to CSA channels required a reboot on some receivers. Other more resilient receivers just threw an error(ioctl(CA_SET_DESCR_MODE): Invalid argument), but continued to work. This was described as a bug of these receivers, but in fact it was a bug of oscam-emu. The correct mode for the CSA algorithm is CBC and not ECB! Thanks to all who helped)
-[powervu] Added support for hash mode 30
-insert hd03 and hd04 atr
-[dvbapi + powervu] Properly set the descrambler mode for CSA
(When watching a DES powervu channel, switching back to CSA channels required a reboot on some receivers. Other more resilient receivers just threw an error(ioctl(CA_SET_DESCR_MODE): Invalid argument), but continued to work. This was described as a bug of these receivers, but in fact it was a bug of oscam-emu. The correct mode for the CSA algorithm is CBC and not ECB! Thanks to all who helped)
- Messages
- 29,889
Ncam 9.1 compiled and patched by marouan & READ
-Improvement the emu
-[nemu] Fixed potential deadlock in powervu emm handling (When the key DB contains no powervu keys, the powervu_get_hexserials() retuns 0 and the mutex in emu_get_pvu_emm_filter() is not released)
-Improvement the emu
-[nemu] Fixed potential deadlock in powervu emm handling (When the key DB contains no powervu keys, the powervu_get_hexserials() retuns 0 and the mutex in emu_get_pvu_emm_filter() is not released)
- Messages
- 29,889
Ncam 9.2 compiled and patched by marouan & READ
-Improvement the emu
-Fixes detecte reader and file-keys of constant.cw
-[powervu] Added support for various hash modes (This includes hash modes 0, 0x0B, 0x0C, 0x0D, 0x0E and greater than 0x27)
-Improvement the emu
-Fixes detecte reader and file-keys of constant.cw
-[powervu] Added support for various hash modes (This includes hash modes 0, 0x0B, 0x0C, 0x0D, 0x0E and greater than 0x27)
oys
Registered
- Messages
- 557
Ncam v 9.4
Code:
[B]-[ncam] Better solution for setting CBC mode for CSA
(Instead of hard coding the algo mode in the dvbapi_write_cw(), we
now initialize the er->cw_ex variable with the proper value)
-Simpler code for the EXTENDED_CW struct
-[ncam] Renamed caid_is_biss_static() to caid_is_biss_fixed()[/B]Here are Only Bin file ..
(build-mips (Gigablue-Dream-VU+-Xtrend-Formuler
(build-sh4 (Golden Media-Galaxy innovations-Amiko
(cortexa9hf-vfp-neon-ARM (DreamoxUHD + VU+4K + Routers Mipsel DD-WRT
(aarch64-ARM (VU+4K Duo4K + osmio4k
(build-x86-Linux-pc (32bit-i686
(build-x86-Linux-pc (64bit
(build-mips (Tiviar plus and similar
(build-mips-router (Routers Mipsel DD-WRT
oys
Registered
- Messages
- 557
Ncam v 9.7
Code:
-Rework on dvbapi to incrase the amount of descramblers
-Support for DVB-CISSA scrambling algorithm and 16 byte CWs
Get available descramblers in box and BISS2 related changes
* Instead of using a predefined number of descramblers (16 until now), oscam now gets the exact number of available descramblers in box.
* Skip cw checks for BISS2, similar to what is done for BISS1. BISS2 uses 16 byte cw, so some checks need to be skipped.
* Cosmetic changes including code refactoring, variable renaming and comment addition to several places.- Messages
- 29,889
Ncam 9.8 compiled and patched by marouan & READ
-Add support dvbcissa-biss2
-Increased max demux to 32 and max filters to 64
-Decreased max ecm pids to 16 and emm pids to 16
-Decreased max stream indices to 8
-[dvbapi] Increased MAX_STREAM_INDICES back to 32
(It should be equal to MAX_STREAM_PIDS or else it creates problems with specific powervu channels. A better solution (with will also result in even lower number of descramblers needed for powervu channels) will be added in the future)
-[nemu] Dropped drecrypt & videoguard module
(No channel uses it anymore)
-fix bug in disablecrccws_only_for
-Add support dvbcissa-biss2
-Increased max demux to 32 and max filters to 64
-Decreased max ecm pids to 16 and emm pids to 16
-Decreased max stream indices to 8
-[dvbapi] Increased MAX_STREAM_INDICES back to 32
(It should be equal to MAX_STREAM_PIDS or else it creates problems with specific powervu channels. A better solution (with will also result in even lower number of descramblers needed for powervu channels) will be added in the future)
-[nemu] Dropped drecrypt & videoguard module
(No channel uses it anymore)
-fix bug in disablecrccws_only_for
Ncam 9.9 compiled and patched by marouan & READ
Ncam-Images-MIPS-IPK (All Mipsel devices ipk install file)
NCam-Images-OSDreambox-DEB (All ARM devices deb install file)
*************
Here are Only Bin file ..
(build-mips (Gigablue-Dream-VU+-Xtrend-Formuler
(build-sh4 (Golden Media-Galaxy innovations-Amiko
(cortexa9hf-vfp-neon-ARM (DreamoxUHD + VU+4K + Routers Mipsel DD-WRT
(aarch64-ARM (VU+4K Duo4K + osmio4k
(build-x86-Linux-pc (32bit-i686
(build-x86-Linux-pc (64bit
(build-mips (Tiviar plus and similar
(build-mipszrouter (Routers Mipsel DD-WRT
- 02-05-2019
- -[nemu] Pass complete rdr structure to emu_process_ecm()
- (Also re-ordered arguments in powervu_ecm())
- -remove duplicate debug dump of er->ecm
- -fix bug in disablecrccws_only_for also in cacheex
- -general disable checksum correction code optimization
- -[powervu] Added new method for matching ECM and EMM keys
- (Read the wiki for instructions on how to use it: https://github.com/oscam-emu/o…der-new-method---may-2019
- This method is based on enigma2 namespace and it is only available for enigma2 and Tvheadend/VDR software for PC. Also, it does not work with stream relay)
- -[dvbapi] Fix for stapi, coolapi, etc
Ncam-Images-MIPS-IPK (All Mipsel devices ipk install file)
NCam-Images-OSDreambox-DEB (All ARM devices deb install file)
*************
Here are Only Bin file ..
(build-mips (Gigablue-Dream-VU+-Xtrend-Formuler
(build-sh4 (Golden Media-Galaxy innovations-Amiko
(cortexa9hf-vfp-neon-ARM (DreamoxUHD + VU+4K + Routers Mipsel DD-WRT
(aarch64-ARM (VU+4K Duo4K + osmio4k
(build-x86-Linux-pc (32bit-i686
(build-x86-Linux-pc (64bit
(build-mips (Tiviar plus and similar
(build-mipszrouter (Routers Mipsel DD-WRT
- Messages
- 29,889
Ncam 10.0 compiled and patched by marouan & READ
-[streamserver + powervu] Use the new key method here as well
(We can get the tsid, onid and ens values from the service reference, so this is possible after all)
-Cosmetics to log messages
-[streamserver + powervu] Use the new key method here as well
(We can get the tsid, onid and ens values from the service reference, so this is possible after all)
-Cosmetics to log messages
- Messages
- 29,889
Ncam 10.1 compiled and patched by marouan & READ
-[biss] Increased variable size to avoid potential overflow
-[viaccess] Fixed CW checksum bytes for viaccess 2
-Added support for a higher number of demux devices in CA PMT
(Modern enigma2 boxes with FCB tuners can have many demux devices,
so a new CA PMT descriptor that allows up to 128 demuxes (descriptor tag 0x86) is now supported.
Also, the get_demux_options() function is completely re-written,
so it doesn't care for the order of descriptors inside the CA PMT message)
-[biss] Increased variable size to avoid potential overflow
-[viaccess] Fixed CW checksum bytes for viaccess 2
-Added support for a higher number of demux devices in CA PMT
(Modern enigma2 boxes with FCB tuners can have many demux devices,
so a new CA PMT descriptor that allows up to 128 demuxes (descriptor tag 0x86) is now supported.
Also, the get_demux_options() function is completely re-written,
so it doesn't care for the order of descriptors inside the CA PMT message)