Mnigma for WeTekPlay 0.10

mach73

Registered
Messages
1,047
Mnigma for WeTekPlay 0.10






  • Experimental release of PLi based Enigma2 for WeTekPlay.
  • Initial boot takes some time to prepare micro SD card for E2 and Kodi.
  • By default (might change in the future and for NAND version), recording and timeshift are set to use micro SD card partition.
    EPG data uses /hdd as well as E2 Picons. All the above is adjustable from System Menu.
  • In general, it is preferable to use faster media for recording. Your new USB stick might be (much) faster than micro SD card and vice versa.
  • Tested with Wetek E2 remote control.
  • OElec RC support still limited, but should work after selecting Elec remote from Menu-Setup-System-WeTekRC select
    and loading OElec keymap from Menu-Setup-System-Keymap.
  • ******-latest update only binaries, leaving your settings intact.
  • Until fixed, please do NOT mount (or use in any other way) kernel partition from Setup-System-Device Mount Manager. It is a small, FAT16
    partition (Shown 1st, with =?=) and is not of much use except for kernel.
  • RC buttons assignemts were done in good faith, please feel free to change as per your pleasure in Hotkeys.
  • Radio mode supported. Note that some channel lists do not include DVB-S radio (ciefp).
  • E2 based playback of recorded material with REW/FF (numercal keys; 1, 4, 7 rewind in var speeds, 3, 6, 9 do FF).
  • Mnigma's native skins are MetropolisHD in two variants Dark and Light. Three native PLi skins are included as well (full HD is NOT an option for now).
  • Wetek System Menu includes a tool for fine tuning AV sync. Default settings are likely to be agreeable for most cases.


http://mnigma.zapto.org/Mnigma/WeTekPlay/wetekplay-MNIGMA-0.1-20160112_sdcard.zip







 

mach73

Registered
Messages
1,047
Its takes 2 min to first booting video mode 1080i has problems choose video mode 720p or 1080p both are ok..
Oscam latest svn 11209 can be installed during first setup no need to ftp password its empty..E2 remote air mouse keyboard all ok..
Kodi buttons seems ok..
 

mach73

Registered
Messages
1,047
For classic mouse remote users back button for colour buttons 1 2 3 4 option does not work with e2 remote all ok..
 

mach73

Registered
Messages
1,047
WeTekPlay MNIGMA-0.1 SDcard 14.01.2016

http://mnigma.zapto.org/Mnigma/WeTekPlay/wetekplay-MNIGMA-0.1-20160114_sdcard.zip




Changelog text:


30.12.2015
- initial 0.1 release

12.1.2016
- add extra wetek options
- zoom capability
- optimize AV sync, real time changes in Wesync Settings visible

14.1.2016
- add kernel update script
- add option for kernel update in Mnigma's Little Helper
- upstream updates:

servicemp3: reduce eDebug output about buffer percentage
Output is flooded with buffer percentage message hurting
stream startup and playback.

frontend.cpp SNR report, debug info

update fr et pl translations
 

mach73

Registered
Messages
1,047
WeTekPlay MNIGMA-0.1 SDcard 15.01.2016

http://mnigma.zapto.org/Mnigma/WeTekPlay/wetekplay-MNIGMA-0.1-20160115_sdcard.zip



Changelog text:

14.1.2016
- update MetropolisHD skins
- fix OpenElec keymap, fix as in "it does not crash"

15.1.2016
- Increase compability with OEA type skins, like KravenHD etc.



WeTek OpenElec-RemoteControl

Instead of using keymap for Open Elec it would be nice if the following solution works for them, as it would make OE RC
compatible with WeTek E2 RC.

Steps:
- Choose OpenElec RC from Menu=>Setup=>System=>Wetek=WeTek RC Select
- Download keymaptranslation.xml from here
- copy the above file to your WeTek (via FTP, or however) to /usr/share/enigma2
- restart enigma

Possible problem:
- The device name in keymaptranslation is not set correctly

Possible solution:
- edit the file and try with other device name, one of those in the beginning of the file should work.
If not check device names, from 'Available input devices'
 
Last edited:

mach73

Registered
Messages
1,047
WeTekPlay MNIGMA-0.1 SDcard 16.01.2016

http://mnigma.zapto.org/Mnigma/WeTekPlay/wetekplay-MNIGMA-0.1-20160116_sdcard.zip


Changelog :

16.1.2016

- E2 misc changes.
- gst misc changes.
- fixed Kodi backup.
- NFS daemon fixes
- new kernel.
Includes latest patches, but for sake of simpler upgrade, held the old name.
Improved DVB playback, notably on 16E and 30W

NOTE: To avoid re flashing, although it IS recommnended, first do a normal on line update thru SW Manager,
go to PPanel-Mnigma's Little Helper and choose Kernel Upgrade. Reboot thru Menu.
 

mach73

Registered
Messages
1,047
Online update

17.1.2016
- E2 misc updates from upstream, debug oriented
- dvb changes not yet in, need retest
- refinements in kernel update
 
Last edited:
Top