sunray 4

tab99_uk

Registered
Messages
31
hi

got a sunray 4 triple tuner been using it for satellite for years no problems.

i want to use it for cable uk which image should i use for it..

thanks
 

manufact

Registered
Messages
177
to use cable tuner with normal images

go to

/etc/enigma2/settings

and add a satellite with frequencies and symbolrate:

frequency="01306000" (this is 306mhz)

example:


<satellites>
<sat flags="1" name="Cable XXX" position="000">
<transponder fec_inner="5" frequency="01306000" inversion="0" modulation="0" polarization="0" symbol_rate="06900000" system="0" />
<transponder fec_inner="5" frequency="01314000" inversion="0" modulation="0" polarization="0" symbol_rate="06900000" system="0" />
<transponder fec_inner="5" frequency="01346000" inversion="0" modulation="0" polarization="0" symbol_rate="06900000" system="0" />
<transponder fec_inner="5" frequency="01354000" inversion="0" modulation="0" polarization="0" symbol_rate="06900000" system="0" />
<transponder fec_inner="5" frequency="01362000" inversion="0" modulation="0" polarization="0" symbol_rate="06900000" system="0" />
<transponder fec_inner="5" frequency="01370000" inversion="0" modulation="0" polarization="0" symbol_rate="06900000" system="0" />
<transponder fec_inner="5" frequency="01378000" inversion="0" modulation="0" polarization="0" symbol_rate="06900000" system="0" />
<transponder fec_inner="5" frequency="01386000" inversion="0" modulation="0" polarization="0" symbol_rate="06900000" system="0" />
<transponder fec_inner="5" frequency="01394000" inversion="0" modulation="0" polarization="0" symbol_rate="06900000" system="0" />
<transponder fec_inner="5" frequency="01402000" inversion="0" modulation="0" polarization="0" symbol_rate="06900000" system="0" />
<transponder fec_inner="5" frequency="01410000" inversion="0" modulation="0" polarization="0" symbol_rate="06900000" system="0" />
<transponder fec_inner="5" frequency="01418000" inversion="0" modulation="0" polarization="0" symbol_rate="06900000" system="0" />
<transponder fec_inner="0" frequency="01426000" inversion="0" modulation="0" polarization="0" symbol_rate="06900000" system="0" />
</sat>

so you need to know the correct frequencies for your provider


after that u need to "activate" that satellite under tuner settings

and then do a manual channel search on that virtual satellite
 
Last edited:

tab99_uk

Registered
Messages
31
here is the info for my area

netid 41053 frequency 666750 symbol_rate 6952 Leeds

how do i ad this on tuner is already activated .
 

EnoSat

Senior Member
Messages
1,952
work in two mode:
as DVB-S + DVB-C + DVB-T (use 3 xml files)
or
as DVB-S (use 1 xml file with DVB-T & DVB-C inside file)

check your status mode
 

tab99_uk

Registered
Messages
31
work in two mode:
as DVB-S + DVB-C + DVB-T (use 3 xml files)
or
as DVB-S (use 1 xml file with DVB-T & DVB-C inside file)

check your status mode

i have the satalite tuner working for years but just cant get this damn cable tuner working.

tried like 5 different images still no luck.
 

Ferret

Marching On Together !
Staff member
Administrator
Messages
17,480
First thing you must do on all images is install the trail tuner 1.0.3b if not done so already its the only driver working with qam256
 

tab99_uk

Registered
Messages
31
First thing you must do on all images is install the trail tuner 1.0.3b if not done so already its the only driver working with qam256

put a old nemesis image on installed the driver u said stil wont scan nothing.

only image i had some luck with is the open pli 2 which scanned 5 channels only.
 

T50

Donating Member
Messages
230
After installing the plugin trial tuner in the menu setup you will see this :

screenshot1.jpg


Did you see this?
 
Top