MGcamd 1.35 cube revo

Messages
700
Hi all any one have a working package of the new MGcamd 1.35 for this ipbox-9000 cuberevo?
i am using latest pkt E2 image

Been looking around but only see dreambox versions!


Thanks In Advance!
 
Last edited:

egholm

Registered
Messages
25
Hallo
Just download emu from plugins, make your mgcam config,and it works perfekt,if you don`t know how seach forum or fell free to ask.
I can record 2 hd channels and still watch a third hd channel.
I connect to internel cccamd.
Best regards
 
Last edited:

jero87

Registered
Messages
53
Hallo
Just download emu from plugins, make your mgcam config,and it works perfekt,if you don`t know how seach forum or fell free to ask.
I can record 2 hd channels and still watch a third hd channel.
I connect to internel cccamd.
Best regards

i can record channel but freez i have cuberevo mini
 

Dooley

Registered
Messages
43
Hallo
Just download emu from plugins, make your mgcam config,and it works perfekt,if you don`t know how seach forum or fell free to ask.
I can record 2 hd channels and still watch a third hd channel.
I connect to internel cccamd.
Best regards

Ermm... How do you connect to an internal cccamd on an ipbox ?
Not possible, imho.
 

just4fun2

Registered
Messages
361
Hi jamie...it is working now? i have pb with revo3000 & pkt 7.5 or extreme5b.....impossible for me to have mgcamd to connect cccamd server....if i install incubus...there´s no pb:rolleyes:
if you find solution, please make a post..thanks
 

japoguapo

Banned
Messages
42
Hi jamie...it is working now? i have pb with revo3000 & pkt 7.5 or extreme5b.....impossible for me to have mgcamd to connect cccamd server....if i install incubus...there´s no pb:rolleyes:
if you find solution, please make a post..thanks

Hi mate

could ou plz post your mgcamd_cfg?

Reagrds.
 

jero87

Registered
Messages
53
i can recording channel with mgcamd 1.35 freezing and block emu :mecry:

my image is dgs sifteam 9580 i d'ont have this problem with incubus 0.55
 

just4fun2

Registered
Messages
361
Hi mate

could ou plz post your mgcamd_cfg?

Reagrds.
Hi, her is it...i think that the server is 2.13 & can´t accept the mgcamd because i´m accepted but fail..look at this****
recognized ****Box type: ipbox9000
[mgcam] emm thread started
[cccamd] My nodeID fb4f22222180ed22
[cccamd] =============== Connecting to xxxxxx.dyndns.tv:12000... ===============
[cccamd] Connected to xxxxxx.dyndns.tv:12000 as xxyyzz (243ms)
[cccamd] Login to xxxxxx.dyndns.tv:12000 as xxyyzz accepted (279ms)
read message from server failed: 33
# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 01 }

# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 01 }

# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 02 }

# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 01 } 0x12c0

# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }

# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
# 32 cccamd netclient, card list saved as /tmp/cccamd.info
# (ECM only, supported server version up to 2.1.1, later not work)
G: { 32 }

# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 30

# network ecm timeout in seconds
K: { 05 }

# newcamd dead routes connect retry, sec
Q: { 600 }

# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 02 }

# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } username password

# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80

# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 03 } 172.16.1.1 28007 /tmp/mgcamd.log

# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }

# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E:) time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }

# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 00 }

# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 00 }

# map all 180x nagra caids to 1801
# default is 01
#F: { 01 }
 

mamad_hv

Registered
Messages
58
Hi friend
can anyone Have New priority list for MGcamd 1.35 connected to CCcam ? i have Cube revo Mini and i have problem with Irdeto prov Likes S1-S8 and ....
i read Example but its not enouqh .
any one like me have a problem with some channels and need prio ?
 

rustyj

Registered
Messages
78
Hi all
Does Mgcamd 1.35a work on cuberevo HD??
if so can somone plz point in in the direction of installing it.

thx
 

vebjosl

Registered
Messages
1
Hi. I have an IPbox 9000hd installed Sifteam r11502 and mgcamd-1.35. I'm using my Canal Digital card in the internal reader. It's not working on any of the coded chanels. I used to have an NLB image. That worked but it was unstable when recording. Any hint on how to solv this?
 
Messages
700
Hi. I have an IPbox 9000hd installed Sifteam r11502 and mgcamd-1.35. I'm using my Canal Digital card in the internal reader. It's not working on any of the coded chanels. I used to have an NLB image. That worked but it was unstable when recording. Any hint on how to solv this?


Make sure you have the sifteam version of the emu the normal version and the e2 version go in difrant places!

also remember to set your boxkey if you need one!
 
Top