TNT Sat - Oscam + CCCam

mark21

Registered
Messages
24
Hello again!
I just update my v5 card into my friend original receiver Optex.., it took 40' , then it's working again..

(ecm) user1(0500&030B00/1318/00B9/21FD/15C): found (349 ms) by TNTSat (L/1/5/5) - M6


Please someone post a complete srvid and services and dvbapi prio for this provider

Into original receiver also Paris Premiere works , on vu+ don't/
 

m35istan

Registered
Messages
692
Into original receiver also Paris Premiere works , on vu+ don't/

Hi,
Sometimes open with TNT Card sometimes not open.
I think it depends program. Not is VU+ or oscam problem.
If you look caid not see 030BOO

image.png


Thanks.
 
Last edited:

Adam792

Registered
Messages
101
Hi,

Sometimes open with TNT Card sometimes not open.

I think it depends program. Not is VU+ or oscam problem.

If you look caid not see 030BOO



image.png




Thanks.



Yes Paris Première only clears for a couple of periods during the day - around lunchtime and then ~18:30-21:00 CET. Other times there is no 0500:030B00 CAID.
 

mark21

Registered
Messages
24
I confirm that ParisPremiere open now, after i put the sid 232C in services and srvid. Thanks guys!

If you know other channles that works from the card, please tell us .. Paris Premiere is not mentioned on the official website
 

zeeteefje

Registered
Messages
39
Neither Gbox nor Scam was able to update my card, but using Scam after Gbox solved the problem:

using ecm #7cc for long viaccess ecm:D
 

Lav

Registered
Messages
257
I can confirm this!

I have a TNTSat v5 card (from 2016, valid til 2020) which has not been working in OSCam due to the change. I do not have an official TNTSat HD receiver (my only receiver was an SD Strong 6410 from 2008 which I got rid of last year!)

I have a Fransat Neotion Viaccess Orca CI+ module. I put the TNTSat card in this and tuned to M6 on 19.2°E for fifteen minutes. The CAM gives an on-screen message of "You do not have the rights to view this channel", but now I have my card back in OSCam, the channels are all clearing perfectly! :)

Code:
2017/04/30 23:19:54 50406B65 c (ecm) tvheadend (0500@030B00/1318/2329/15C:DBEDD8B68AB2E9FC97D3BA539BB163B9): found (284 ms) by TNTSat - TF1

YES, i accept this metod. The same thing happened to me too.
Today i update my tntsat V5 card with viaccess orca cam acs 4.1

2017/05/16 16:20:51 72C3CBCB r (reader) tntsat [internal] using ecm #7cc for long viaccess ecm

smit-viaccess-secure-cam_17774.jpg


and now all tntsat channels working again in oscam...(Paris Premiere NOT)



my ecm is 1400-1500ms , not 284ms?

tnt-ok.jpg
 

tpetkov

Registered
Messages
8
Neither Gbox nor Scam was able to update my card, but using Scam after Gbox solved the problem:

using ecm #7cc for long viaccess ecm:D

I can confirm that I left gbox on TMC and after the card started to show:
===== Via EMM on CaID 0x0500, pid 0x168C ======
prov: FFF40, MKey: 01, SA: 12 87 BB
card 1 response in 181 ms
Card response: 90 00
===============================================
card 1 response in 447 ms
Card response: 99 00
===============================================

and switching to scam after about 30 minutes in oscam I have:
(reader) tntsat [internal] using ecm #7cc for long viaccess ecm
 
Last edited:

Lav

Registered
Messages
257
Paris Premiere is now ok for me.
My problem is the big LOCAL ecm 1460ms - 1480ms (see the picture in the post above).
local box(1) ecm 1480ms
c line or nline to local box(2) ecm 2600ms

Is there any solution because I see that some have an ecm 280ms and a similar one
 

enrico1

Registered
Messages
23
I have a V6 card,some days black screen, in log I have this:using ecm #805 for long viacces ecm.What you means? Solution?
 

manuelcar

Registered
Messages
3
Hi,
Can someone please pm or post gbox configs.
I managed to install and start gbox, but i have no config files in my Sh4 box.
Thanks in advance.
 

manuelcar

Registered
Messages
3
Hi,
Can someone please pm or post gbox configs.
I managed to install and start gbox, but i have no config files in my Sh4 box.
Thanks in advance.
 

tpetkov

Registered
Messages
8
Hi,
Can someone please pm or post gbox configs.
I managed to install and start gbox, but i have no config files in my Sh4 box.
Thanks in advance.

These are my gbox.cfg and softcam.cfg
With them in tmp directory you can see debug.txt file and the EMM answers from the card.
gbox.cfg:
Code:
# gbox config file

# Trace, Debug
#    xx yz ; xx=00 no konsole output
#    xx yz ; xx=01 konsole output
#    xx yz ; y=0 debug output (dont use)
#    xx yz ; y=1 no debug output
#    xx yz ; z=0 ouput to konsole
#    xx yz ; z=1 output to /var/tmp/debug.txt
#    xx yz ; z=2 Output to UDP (to capture with gboxt)
Z: { 01 11 } 192.168.1.2 8024

# gbox working mode
#    00 pure Emu
#    01 pure SoftCam (when card inside), Emu (when no card inside)
#    02 pure Net Client
#    03 Mixed mode !!!!! always use this !!!!!
G: { 03 }

# Display ECM messages on Konsole
#    00 dont show any ECMs
#    01 show only valid ECMs
#    02 show valid and bad ECMs with complete data display
C: { 01 }

# Display EMM messages on Konsole
#    00 dont show any EMMs
#    01 show only valid EMMs
#    02 show valid and bad EMMs with complete data display
#    1* Log any tier change on PW-Nagra-17xx cards into /var/keys/pwupdate.log
M: { 01 }

# Auto Update
#    00 AU disable (default)
#    01 AU enable
#    02 AU auto 
#    03 AU enable with ua,sa and ga filter !!!!! always use this !!!!!
A: { 03 }

# Key Update
#    01 update only new keys, default setting
#    02 update all keys (used for valid PMK checking)
U: { 02 }

# Hash pids
#    00 hash all pids, DO NOT USE THIS OPTION, IT IS ONLY FOR TESTING STUFF
#    01 hash only pids with implemented algos and available keys !!!!! always use this
H: { 01 }

# Key files folder
#    00 keyfiles in /var/keys
#    01 keyfiles in /var/tmp
T: { 00 }

# On Screen Display for the Multysystemcam on com1/com2
#    00 No OSD (default)
#    01 display Smartcard messages in Neutrino
#    02 display Smartcard messages in Neutrino new nhttpd format
#    03 display Smartcard messages in Enigma
#    04 display Smartcard messages in Enigma2
O: { 00 } 192.168.0.3 coolstream

# Logger and NET-mode UDP port Init
#    00 do not init UDP port
#    01 Init UDP port for IP, port, UDP
L: { 00 } 192.168.0.251 7025

# demux, multicam/comport configuration
# example: yz = 0x0A = 00001010 (use com2 with inverted CTS detection line)
#    *x ** ; x = device nummber to be used (0= default)
#    D* ** ; force use of /proc/bus/gtx for cw write operations
             (in the dbox2 the gbox writes directly the CWs, 00 is the
             recommended mode ! No drivers are required) use D* ** ONLY if
             you have Problems. 0* ** should be prefered !!!
#    F* ** ; write CWs in both devices (used for PVR in STB04xxx devices)
#    ** y* ; y=0001b (0x1*) use slot1 as Multicam (only on STB04xxx)
#    ** y* ; y=0010b (0x2*) use slot2 as Multicam (only on STB04xxx)
#    ** y* ; y=0011b (0x3*) use slot1 and slot2 as Multicams (only on STB04xxx)
#    ** *z ; z=0001b (0x*1) use com1 as Multicam
#    ** *z ; z=0010b (0x*2) use com2 as Multicam
#    ** *z ; z=0011b (0x*3) use com1 and com2 as Multicams
#    ** yz ; yz=00110011b (0x33) use slot1+slot2+com1+com2 as Multicams
#    ** *z ; z=0100b (0x*4) invert CTS detection on com1
#    ** *z ; z=1000b (0x*8) invert CTS detection on com2
#V: { 00 10 } #Slot 1
#V: { 00 20 } #Slot 2
V: { 00 30 } #Slot 1+2
#V: { 00 3F } #Slot 1+2+SC8in1

# RS232 SSSP mode
#    x    debug messages, 1=on, 0=off
#     y   com port to use (0=none, 1=com1, 2=com2)
R: { 00 } 1200

# Task type
#    00 **  normal mode gbox mode (no season, use Multicam instead)
#    01 **  Season Emulation in a Irdeto allcam chid 0602 nonZ
#    10 **  Season Emulation in a Irdeto allcam chid 1702 nonZ
#    11 **  Season Emulation in a Irdeto allcam chid 1702 Z
#    12 **  Season Emulation in a Irdeto allcam chid 1722 Z
#    13 **  Season Emulation in a Irdeto allcam chid 1762 Z
#    ** *1  Com port to use for season emulatiom (1 or 2)
#    ** 0*  Use CTS for RST detection
#    ** 1*  Use DCD for RST detection
#    ** **   9600 = Baudrate to be used (working only on dbox2)
W: { 00 00 } 1200

# =============================================================================
# extra options to override default setting in case you expirience Problems,
# normaly these setings are not required.

# Files, folders, devices
#          folder/device             comment
#F: { 01 } /var/tmp/pmt.tmp		// pmt file
#F: { 02 } /var/tmp/emm.info		// key update log file
#F: { 03 } /var/tmp/ecm.info		// ecm info file
#F: { 04 } /var/tmp/atack.txt		// atack info file
#F: { 08 } 1				// pmt mode (0 - pmt file mode, 1 - pmt socket mode)
#F: { 11 } /var/keys			// folder for config files
#F: { 12 } /var/tmp			// folder for temporary file
#F: { 13 } /var/tmp			// folder for keyfiles
#F: { 21 } /dev/null			// ca device
#F: { 22 } /dev/null			// dvr device
#F: { 23 } /dev/null			// demux device
#F: { 31 } /dev/null			// second ca device to write cw's (recording)
#F: { 41 } /dev/sci0			// STB04xxx slot1
#F: { 42 } /dev/sci1			// STB04xxx slot1
#F: { 43 } /dev/tts/0			// rs232 com1
#F: { 44 } /dev/tts/1			// rs232 com2
#F: { 43 } /dev/ttyUSB0              // rs232 com1# fьr externen Cardreader an com1 SC8in1 oder MCR 4/8 oder Smargo
#F: { 44 } /dev/ttyUSB1              // rs232 com2# fьr externen Cardreader an com2 SC8in1 oder MCR 4/8 oder Smargo

# For overclocking freaks, Clocking internal STB04xxx slots with:
# 1=7.80MHz 2=6.30MHz 3=5.25MHz 4=4.50MHz 5=3.94MHz 6=3.50MHz 7=3.15MHz
# Irdeto works fine on 7.8MHz, all other fine on 6.30MHz or 5.25MHz
# The Dream has not a clean clock signal, some cards that are sensitive will
# refuse to work even on 3.5MHz, thats why 3.15MHz is the default value there.
# On other STB04xxx recievers the same cards work with 6.30MHz
# Ist nicht Aktiv geschaltet ,also keine Funktion
#F: { 51 } 02                        // irdeto
#F: { 52 } 03                        // seca
F: { 53 } 01                        // viaccess
#F: { 54 } 03                        // nagra
#F: { 55 } 03                        // crypto
#F: { 57 } 03                        // conax
#F: { 58 } 03                        // ***

# force a name change of the season or sssp rs232 device
#F: { 45 } /dev/ttyS1

# set stay alive ping time in seconds (default is 300)
#F: { A0 } 300

# disable direct serial port I/O access on 80x86cpus (win and linux)
# direct port i/o is used to set unusual Baudrates, if you want to
# a 3.579MHz card in a 6.000MHz reader etc ...
#
# Enabled (A1=0) is the default setting, has always been !!!
#
# Disable (set to 1) it ONLY if you have problems with ioperm or you want
# to use a usb-to-rs232 smartcard reader
F: { A1 } 1 

# descrambler selection by camd.socket private descriptor (0 - index mode, 1 - mask mode), mask mode is default
#F: { AA } 1

softcam.cfg:
Code:
# CAS settings (NEW)
#
#[generic]
#reset_rs232_buffer	= 1		; (default: 1) empty RS232 buffer before writing
#
#[slot-n]				; slot section with n=1..18
#include		= /foo/slot.cfg ; looking for section parameters in user defined configuration file, only outside of a section defined parameters will be used
#initialization		= basic		; (default: basic) [basic,extended] init card in basic or extended mode
#disable_pts		= 0		; (default: 0) enable/disable protocol type selection (PTS) handshake
#enable_ice		= 0		; (default: 0) enable/disable irdeto cryptoworks enveloped support
#enable_onionmode	= 0		; (default: 0) enable/disable irdeto/nagra aladin onion mode (1833(1702)1833)
#alternative_frequency	= 0		; (default: 0) check additional osc frequency, value in kHz, example 8MHz=8000000
#alternative_baudrate	= 0		; (default: 0) check additional baudrate for atr, value in bit/s, example 81861
#byte_delay		= 0		; (default: 0) unit (1e-6 s)
#instruction_delay	= 0		; (default: 0) unit (1e-3 s)
#
#enable_unique_emm	= 0		; (default: 0) set unique emm section filter on demux device
#enable_shared_emm	= 0		; (default: 0) set shared emm section filter on demux device
#enable_global_emm	= 0		; (default: 0) set global emm section filter on demux device
#block_unique_emm	= 1		; (default: 1) block unique address/hex_serial emm
#block_shared_emm	= 1		; (default: 1) block shared address/provider emm
#block_global_emm	= 1		; (default: 1) block global address/all_card emm
#block_user_emm		= 1		; (default: 1) block user emm, read from /var/tmp/remm.txt
#save_processed_emm	= 0		; (default: 0) save processed EMMs to (/var/tmp/scXX.emmproc)
#save_processed_emm_file= /var/keys/sc0X.emmproc; (default: /var/tmp/scXX.emmproc) user defined output file
#save_rejected_emm	= 0		; (default: 0) save rejected EMMs to (/var/tmp/scXX.emmblock)
#save_rejected_emm_file = /var/keys/sc0X.emmblock; (default: /var/tmp/scXX.emmblock) user defined output file
#
#sidfilter		= 000C,000D	; define sids can dispatch or not dispatch by card
#sidfilter_local_policy	= allow_all	; (default: allow_all) [deny_all,allow_all,allow_defined,deny_defined]
#					;			deny_all 	- old cwshare S-Line local rule 00
#					;			allow_all	- old cwshare S-Line local rule 01
#					;			allow_defined	- old cwshare S-Line local rule 02
#					;			deny_defined	- old cwshare S-Line local rule 03
#sidfilter_global_policy= allow_defined	; (default: allow_all) [deny_all,allow_all,allow_defined,deny_defined]
#					;			deny_all 	- old cwshare S-Line global rule 00
#					;			allow_all	- old cwshare S-Line global rule 01
#					;			allow_defined	- old cwshare S-Line global rule 02
#					;			deny_defined	- old cwshare S-Line global rule 03
#sidfilter_teacher	= card		; [card,network] use selected ecm request source to update sidfilter (add or delete current sid)
#					;			card		- old cwshare S-Line global rule 03, means allow defined and update by zone0
#					;			network		- old cwshare S-Line global rule 03, means allow defined and update by zone1
#
#pidfilter		= 100C,100D	; define pids can dispatch or not dispatch by card
#pidfilter_local_policy	= allow_all	; (default: allow_all) [deny_all,allow_all,allow_defined,deny_defined]
#pidfilter_global_policy= allow_defined	; (default: allow_all) [deny_all,allow_all,allow_defined,deny_defined]
#
########################################################################################
#V13/14 Karten
#Sobald fьr die Karte eine Verlдngerung gesendet wird erstellt die gbox in/tmp eine Datei
#Namens SC01.emmblock.Den dort enthaltenen Verlдngerer kopiert ihr dann in eine Datei Namens remm.txt 
#und schiebt diese dann nach /tmp die gbox arbeitet diese Datei dann automatisch ab, 
#und verlдngert dann die Karte.Ihr kцnnt die V13/14 karte natьrlich auch in einen anderen Slot stecken ,
#ihr mьЯt dann aber die config genauso anlegen wie die fьr Slot 1.
#Solltet ihr noch mehr Karten haben und ein/en externe/n Reader/s benutzen dann mьЯt ihr die Slots erweitern.
#Ihr kцnnt bis zu 18 Slots erstellen. Slot1 und Slot2 sind immer eure internen Reader der Box ,ab Slot3 beginen dann
#eure externen Reader.

[generic]
reset_rs232_buffer	= 1

[slot-1] # Exklusiv fьr V13/14 Karten  
initialization		= extended
disable_pts		= 0
enable_ice		= 0 # ORF Karte  0=cryptoworks/Mode 1=irdeto/Mode
alternative_frequency	= 0
alternative_baudrate	= 1200
byte_delay		= 0
instruction_delay	= 0
#
enable_unique_emm	= 1
enable_shared_emm	= 1
enable_global_emm	= 1
block_unique_emm	= 0
block_shared_emm	= 0
block_global_emm	= 0
block_user_emm		= 0
save_processed_emm	= 1
save_rejected_emm	= 1

[slot-2] # Karten die nicht geblock werden brauchen 
initialization		= extended
disable_pts		= 0
enable_ice		= 0 # # ORF Karte  0=cryptoworks/Mode 1=irdeto/Mode
alternative_frequency	= 0
alternative_baudrate	= 0
#
enable_unique_emm	= 1
enable_shared_emm	= 1
enable_global_emm	= 1
block_unique_emm	= 0
block_shared_emm	= 0
block_global_emm	= 0
block_user_emm		= 0
save_processed_emm	= 1
save_rejected_emm	= 1
 
Top