SifTeam DM7020 Images

Status
Not open for further replies.

maximo

Super VIP
Messages
588
DREAMBOX: Nuovo firmware SifTeam 1.0 per DM7020
Immagine per FLASH / USB / HDD / CF

- Basata sulla nuova versione di sviluppo OpenDreambox 1.4
(molti aggiornamenti di programmi fra cui Samba 3.0.23c)
- Enigma 1.09 - CVS aggiornato al 28/09/2006
- Firmware release 1.2.0, 28.09.2006
- FP Firmware 1.01
- busybox v1.01
- WebIf 5.9.7-Expert
- Tuxtxt v. 1.98
- Pmt.tmp presente
- with-webif=expert
- with-epg=private
- with-enigma-debug=yes
- with-reiserfs=yes
- with-flashtool=expert
- with-mhw_epg=yes


============================================================
Plugins, Addons, Giochi e Varie:
============================================================
-:plugins aggiunti:-
CTDYN 1.96 (Personalizzare /etc/ctdyn.conf)
MOVIELISTBUILDER 1.13
VLC 0.2.3 (Personalizzare /etc/tuxbox/config/vlc.xml)
PIP 0.7 (Personalizzare /etc/tuxbox/config/pip.conf)
JUKEBOX 0.6.4
SYSINFO 0.8.7 (Aggiunto /etc/sysinfo.conf, ottimo esempio per eseguire propri comandi)
PICVIEWER 1.1.4

-:Giochi:-
DCHESS 1.9
LEMMINGS
4 GEWINNT
BLOCKTRIS
MINDMASTER
PAC
SNAKE
SOL
SOLITAER
SWEEPMINER
WARTANK
YAHTZEA
ZOKOBAN


-:plugins presenti:-
DREAMBOX LINKS WEB BROWSER
RSS READER (Personalizzare /etc/tuxbox/feeds.xml, ho aggiunto LaRepubblica®)
TELETEXT
TUXBOX COMMANDER

-:Skin aggiunti:-
MULTILINE5 (Default all'avvio, ...ottimizzato per picon 0.0.8)

============================================================
Istruzioni per l' utilizzo dell'immagine SIFTEAM-*.* per DM7020S
============================================================
Opzioni in Blu Panell:

*

RESTART ENIGMA
*

GESTIONE AMULE
*

GESTIONE DNS
*

GESTIONE BACKUP
*

INSTALLA ADDONS
*

RIMUOVI ADDONS
*

CREA SWAPFILE
*

VISUALIZZA FILE
*

Tasto Giallo (plugins)
*

Tasto Blu (gestione emu)
*

Tasto Verde (script)

RESTART ENIGMA:
Si riavvia l'interfaccia grafica ENIGMA
(vedi anche “BUGS conosciuti”).

GESTIONE AMULE:
Questo menu' e' presente solo se si e' installato il pacchetto amule-hdd (di default no).
Amule e' un programma per scambio file (non scambiate i file protetti da Copyright),
l'omonimo in WindowsXP® si chiama Emule.
Avviando questa opzione si apre un'altra finestra con la scelta di start/stop (leggere
la documentazione fornita con il pacchetto amule-hdd).

GESTIONE DNS:
Questo menu' e' presente solo se si e' installato il pacchetto ctdyn (di default si'), in
pratica serve per aggiornare il proprio DNS (tipo no-ip, dyndns ecc..).
La prima esecuzione e' meglio farla da telnet in modo da sistemare il file /etc/ctdyn.conf
meglio ancora e' eseguire il comando “ctdyn -h” cosi' si potranno vedere le opzioni possibili.
Comunque ho gia' inserito un file /etc/ctdyn.conf da modificare facilmente anche via ftp.

GESTIONE BACKUP:
In questa immagine le cose piu' “importanti” risiedono in /etc e' percio' consigliato
eseguire un backup anche giornaliero di questa directory (per questa opzione ho creato un pacchetto crond, con
l'opzione di backup giornaliero gia' inserito, scaricabile da IPKG).
Avviando questa opzione si apre un'altra finestra con la scelta del
“supporto di destinazione” CF USB HDD.
Di default e' impostato a /etc ma si puo' cambiare modificando il file /etc/SifTeam/backupdir.

INSTALLA ADDONS:
Compatibile con gli addons della GEMINI, basta copiare il file .tar.bz2 in /tmp
avviare questa opzione e dalla finestra che appare scegliere l'addons da installare.

RIMUOVI ADDONS:
Avviare questa opzione e dalla finestra che appare scegliere l'addons da disinstallare.

CREA SWAP FILE:
Lo swap file altro non e' che della “memoria virtuale” per il 7020 16mb sono piu' che
sufficienti.
Dalla finestra che appare scegliere il “supporto di destinazione” CF USB HDD.
Si puo' impostare a 32MB marcando il checkbox.

VISUALIZZA FILE:
Avviare questa opzione e dalla finestra che appare scegliere il file da visualizzare, di default e'
impostato nela dir. /var/keys ma si puo' modificare il percorso editando il file
/etc/SifTeam/visualizzadir.

Tasto Giallo: (plugins)
Apre la finestra classica dei plugins installati.

Tasto Blu: (gestione emu)
Questo gestisce gli EMU, gli emulatori servono per usare le proprie “CARD ORIGINALI”.
Compatibile con i pacchetti EMU della GEMINI, ma si possono anche installare a mano:
copiare in /var/bin i file che lanceranno l'eseguibile, il file deve essere in
formato “nomeemu_cam.sh” (...importante “_cam.sh”).
Il programma cerca tutti i file con il nome che termina per “_cam.sh” presenti in /var/bin
e li mette in lista, per avviare/fermare/riavviare/.
Quando si sceglie “avvia” il programma, oltre che avviare subito l' EMU, crea dei file
necessari per l'avvio automatico dell' EMU scelta, in modo che se si spegne il decoder al
prossimo riavvio si avra' l' EMU scelta avviata.

Tasto Verde: (script)
Questo gestisce degli script ( utility), che permettono di vedere a video delle utili
informazioni sul sistema.
Volendo si possono personalizzare modificando /etc/SifTeam/script/script0*.sh

============================================================
IPKG (tasto giallo):
Questa opzione permette di installare online i programmi.
All'avvio si apre una finestra con diverse opzioni:
Installed Packages:
Available Packages [Feed: TEMP]:
Available Packages [Feed: SifTeam-addons]:
Available Packages [Feed: SifTeam-upgraded]:
Available Packages [Feed: SifTeam-feed]:

Installed Packages:
Mostra la lista dei pacchetti installati nell'immagine.

Available Packages [Feed: TEMP]:
Mostra la lista dei pacchetti presenti nella directory /tmp
(se si hanno in locale, basta copiarli in /tmp ed usare questa opzione per installarli).

Available Packages [Feed: SifTeam-addons]:
Mostra la lista dei pacchetti presenti online, che comprendono plugins/addons/skin/ecc..
E' consigliato eseguire periodicamente un “UPDATE” (tasto VERDE) per aggiornare la lista dei
pacchetti disponibili online, ...la prima volta che si esegue e' necessario per ricevere la
lista dei pacchetti disponibili.
Qui' con il tasto GIALLO si esegue un comodo UPGRADE del sistema (in pratica tutti i pacchetti
marcati come upgradabili, di colore blu, saranno automaticamente installati).

Available Packages [Feed: SifTeam-upgraded]:
Mostra la lista dei pacchetti presenti online, che comprendono tutti gli upgrade eseguiti dal rilascio dell'immagine.
E' consigliato eseguire periodicamente un “UPDATE” (tasto VERDE) per aggiornare la lista dei
pacchetti disponibili, ...la prima volta che si esegue e' necessario per ricevere la
lista dei pacchetti disponibili.
Qui' con il tasto GIALLO si esegue un comodo UPGRADE del sistema ( tutti i pacchetti
marcati come upgradabili, di colore blu, saranno automaticamente installati).

Available Packages [Feed: SifTeam-feed]:
Mostra la lista dei pacchetti presenti online (in pratica ci sono TUTTI i pacchetti
che mi sono serviti per una completa compilazione dell' immagine).
Si deve eseguire un “UPDATE” (tasto VERDE) per ricevere la lista dei
pacchetti disponibili, (qui' i pacchetti non saranno mai aggiornati dalla versione iniziale
di compilazione).

Tasto Giallo (Impostazioni): (della finestra principale)
Qui' si possono settare diverse opzioni al programma IPKG.
Consigliato marcare queste opzioni:
Remove after Install
Force Reinstall
Force Overwrite

Tasto Blu (Informazioni):
Se premuto mentre e' selezionato un pacchetto ...ne da' le informazioni.

In tutti i casi i colori dei pacchetti variano da:
rosso = non installato
verde = installato
blu = upgradabile

============================================================
WebInterface:
La WebIf ha ora un bottone in piu' “SifTeam Info”, se premuto
aprira' una nuova pagina con altre opzioni (per ora e'
limitato a visualizzare informazioni).

============================================================
MINI HOW-TO:
Qualsiasi programma si voglia far partire all'avvio bastera'
aggiungere il comando in /etc/init.d/user_start.sh
Se per esempio si vuol che all'avvio aggiorni il dns, basta aggiungere:
ctdyn.sh start &

============================================================
BUGS conosciuti:
1) Se si cerca di RIAVVIARE ENIGMA con qualche EMU attiva
(a volte anche qualche programma, tipo ctdyn) il piu' delle volte
ci si ritrova con il decoder in fase di stallo (non riparte Enigma),
per uscire da questa situazione e' necessario collegarsi in telnet
nel decoder e killare la EMU attiva (o il programma che lo sta'
bloccando, esempio: “killall -9 ctdyn”).
 
Last edited by a moderator:

Pattyren

VIP
Messages
1,885
Sifteam-1.3f dm7020

Sifteam-1.3f dm7020

Nuovo aggiornamento Enigma al 28-10-2006

Versione 1.3f:
Modificato il Blu-Panel ora il tasto giallo visualizza i Plugins e non apre il
gestore di installa/upgrade IPKG (raggiungibile da Plugins).
Modificato la sezione Script ora la prima voce e' “Aggiorna Sistema”
se utilizzato effettuera' l'upgrade online automatico (se disponibile).
Tutto questo per poter adattare il Blu-Panel anche al DM7000 sul quale sto' lavorando ora.

Per ugradare via telnet dal Dreambox digitare:
ipkg update
ipkg upgrade
..riavviare enigma o il Dream.
 
Last edited by a moderator:

Rocknroll

Staff member
Administrator
Messages
6,174
SifTeam v1.4 Dm7020

SifTeam-1.4-dm7020
Rilascio 18.11.2006
OE Build Configuration:
BB_VERSION = "1.6.0"
OE_REVISION = "70318e1d41f1a95edf3fb6223dbc7e903ddf5ec4"
TARGET_ARCH = "powerpc"
TARGET_OS = "linux"
MACHINE = "dm7020"
DISTRO = "opendreambox"
DISTRO_VERSION = "1.4.0"
TARGET_FPU = "soft"

Immagine per FLASH / USB / HDD / CF

- Basata sulla nuova versione di sviluppo OpenDreambox 1.4
(molti aggiornamenti di programmi fra cui Samba 3.0.23c e un boot piu' veloce)
- Enigma 1.09 - CVS aggiornato al 13/11/2006
- Firmware release 1.4.0, 13.11.2006
- FP Firmware 1.01
- busybox v1.01
- WebIf 5.9.7-Expert
- Tuxtxt v. 1.98
- Pmt.tmp presente
- with-webif=expert
- with-epg=private
- with-enigma-debug=yes
- with-reiserfs=yes
- with-flashtool=expert
- with-mhw_epg=yes


Plugins, Addons, Giochi e Varie:
- lugins aggiunti:-
CTDYN 1.96
MOVIELISTBUILDER 1.13
VLC 0.2.3
PIP 0.7
JUKEBOX 0.6.4
SYSINFO 0.8.7
RSS READER
PICVIEWER 1.1.4
WEEKEPG 1.2.3

-:Giochi:-
DCHESS 1.9
LEMMINGS
4 GEWINNT
BLOCKTRIS
MINDMASTER
PAC
 
Last edited:

Pattyren

VIP
Messages
1,885
SifTeam 1.6RC3 7020 10.1.07

SifTeam 1.6RC3 7020 10.1.07

Leider keine Beschreibung
 
Last edited by a moderator:

amr999

Registered
Messages
11
SifTeam 1.6.2

New image by SifTeam available now:

Features:
Documentazione Ver. 1.6.2

SifTeam-1.6.2-dm7020

OE Build Configuration:
BB_VERSION = "1.6.0"
OE_REVISION = "1fa921b88f1830daaa21d6100cdef9578f749576"
TARGET_ARCH = "powerpc"
TARGET_OS = "linux"
MACHINE = "dm7020"
DISTRO = "opendreambox"
DISTRO_VERSION = "1.4.0"
TARGET_FPU = "soft"





Immagine per FLASH / USB / HDD / CF





- Basata sulla versione di sviluppo OpenDreambox 1.4
- Enigma 1.09 - CVS aggiornato al 01/02/2007
- Firmware release 1.4.0
- FP Firmware 1.01
- busybox v1.01
- WebIf 5.9.7-Expert
- Tuxtxt v. 1.98
- Pmt.tmp presente
- with-webif=expert
- with-epg=private
- with-enigma-debug=yes
- with-reiserfs=yes
- with-flashtool=expert
- with-mhw_epg=yes





Per differenziarla dalla versione precedente, di default si ha lo skin "Army Matrix" -(grazie a Army)

Cambiamenti:

Aggiornato il cvs al 01-02-2007

Weekepg integrato nell'immagine e' compilato con il nuovo cvs -(grazie a maxZ4)

1) Aggiunto la possibilita' di personalizzare il bottone giallo nel blu-panel, tramite interfaccia si puo' assegnare l'esecuzione di un plugin al tasto e modificare il nome che si visualizzera' sul bottone.

2) Aggiunto la possibilita' di cambiare i nomi visualizzati sui bottoni degli script, in modo che se uno cambia lo script puo' (tramite interfaccia) cambiare il nome al bottone assegnato.

3) Modificato il pannello EMU e la gestione EMU

4) Modificato il pannello swap, ora si puo' annullare lo swap presente per poterne creare uno nuovo, si riesce a vedere le informazioni sullo swap: DIMENSIONE USATO LIBERO (thanks nokia9kCool





Problemi risolti: 7000/7020

Dal menu' "opzioni varie" non si riusciva a montare usb e cf

Dal menu' swap non si riusciva a creare lo swap nell'usb

Dal menu' "weekepg" in "opzioni varie" non si riusciva a eseguire il "Log ora"

Dal menu' EMU non si riusciva a riavviare l'emu attiva (bottone giallo)



Plugins, Addons, Giochi e Varie:


-:plugins aggiunti:-
CTDYN 1.96

-:Giochi:-
LEMMINGS
4 GEWINNT
BLOCKTRIS
MINDMASTER
PAC
SNAKE
SOL
SOLITAER
SWEEPMINER
WARTANK
YAHTZEA
ZOKOBAN

-:plugins presenti:-
DREAMDATA
DREAMBOX LINKS WEB BROWSER
E-MAIL
LCDCIRC
MODEM INTERNET
SATFIND
TELETEXT
TUXBOX COMMANDER

-:Skin aggiunti:-
Army Matrix
( Default all'avvio, ...utilizzabile picon 0.0.9 )
 

maximo

Super VIP
Messages
588
SF TEAM IMG 10042007 pro DREAMBOX DM7020S

SF TEAM IMG 10042007 pro DREAMBOX DM7020S
 
Last edited by a moderator:

Acech

Registered
Messages
678
sf_img_7020_BU 16.4.07

sf_img_7020_BU 16.4.07


Backup für DB 7020 Stick,HDD,CF

Ein fertiges Backup für die jenigen,die sich die Arbeit mit der Zusammenstellung ersparen wollen.

Bitte mit Flashwizard installieren.

Cam's :

camd3883
mgcamd1.22
evocamd2.14
CCcam1.7.0
Newcamd 6.10b
radegast

Einige Plugins-TuxBox commander
Viele Sprachen zur Auswahl
Einige Spiele
DBC-Satan-k*ysupdater(Neue Version)Online Update neuster K**s
DBC-Sin-Keybundle-Updater(neue Version)

Keys:.Aktuell.

viel Spass

mfg
 
Last edited:

ggiuseppe

Registered User
Messages
1,728
SifTeam 1.8 DM 7020

SifTeam 1.8 DM 7020
OE Build Configuration:
BB_VERSION = "1.6.2"
OE_REVISION = "format_version "1"
new_manifest [0000000000000000000000000000000000000004]
old_revision [ad5421a423b1a0850b194484982fedc5f35703ee]"
TARGET_ARCH = "powerpc"
TARGET_OS = "linux"
MACHINE = "dm7020"
DISTRO = "opendreambox"
DISTRO_VERSION = "1.4.0"
TARGET_FPU = "soft"

Immagine per FLASH / USB / HDD / CF

- Basata sulla versione di sviluppo OpenDreambox 1.4
- Enigma 1.09 - CVS aggiornato al 24/05/2007
- Firmware release 1.4.0
- FP Firmware 1.01
- busybox v1.01
- WebIf 6.0.2-Expert
- Tuxtxt v. 1.98
- Pmt.tmp presente
- with-webif=expert
- with-epg=private
- with-enigma-debug=yes
- with-reiserfs=yes
- with-flashtool=expert
- with-mhw_epg=yes


Plugins, Addons, Giochi e Varie:
-
MODEM INTERNET
SATFIND
TELETEXT
TUXBOX COMMANDER


-:Skin aggiunti:-
Dream_s_V3
( Default all'avvio, ...utilizzabile picon 0.9 )

-:Lingue:-
Enigma = Tutte le disponibili
Blu Panel = Inglese - Italiano

ATTENZIONE:
QUESTO FIRMWARE NON CONTIENE CHIAVI, NE' EMULATORI, NE'
INDIRIZZI PER SCARICARE MATERIALE ILLEGALE DI NESSUN TIPO.
L'AUTORE NON E' RESPONSABILE IN NESSUN MODO DELL'USO CHE
GLI UTENTI NE FARANNO, DI LORO SPONTANEA VOLONTA'.

THIS FIRMWARE DOES NOT INCLUDE KEYS, NOR EMULATORS, NOR
URLS FOR DOWNLOADING ILLEGAL STUFFS OF ANY TYPE.
AUTHOR IS NOT RESPONSIBLE IN ANY WAY FOR WHAT
THE USERS WILL DO WITH THIS FIRMWARE.
 
Last edited by a moderator:

ggiuseppe

Registered User
Messages
1,728
SifTeam v.1.8.2

SifTeam v.1.8.2 - 07/09/2007
DB500:
--------
Usable to flash
* Enigma of: 29.08.2007
* Linux version 2.6.9
* GCC 3.4.4 Original CVS
* Web Interface: 6.0.2-Expert
* Busybox 1.01
* Tuxtxt v. 1.99
DB7000:
---------
Usable to USB, CF or flash
* Enigma of: 29.08.2007
* Linux version 2.6.9
* GCC 3.4.4 Original CVS 1.1.0
* Web Interface: 6.0.2-Expert
* Busybox 1.01
* Tuxtxt v. 1.99
DB7020:
---------
* Usable to USB, CF or flash
* Enigma of: 29.08.2007
* OE Build Configuration:
BB_VERSION = "1.6.2"
OE_REVISION = "format_version "1"
new_manifest [0000000000000000000000000000000000000004]
old_revision [5f0748b962e87919f7165d5671690572c9b073af]"
TARGET_ARCH = "powerpc"
TARGET_OS = "linux"
MACHINE = "dm7020"
DISTRO = "opendreambox"
DISTRO_VERSION = "1.4.0"
TARGET_FPU = "soft"
******************************************************
DB7000 and DB7020 :
---------------------------------------
Buttons:
----------
* BLUE - Blu-Panel
* 2x BLUE - Emu-Panel
* YELLOW - Plugins
* BLUE - YELLOW > Addons
* BLUE - GREEN > Scripts
* RED - WEEKEPG (thanks to MaxZ4)
* GREEN - subservices
*
Features:
----------
* Advanced FIREWALL with graphics start/stop/configuration
* Advanced SWAP file configuration, you can set swap in USB, CF or HDD (16mb or 32 mb)
* Advanced DNS with graphics start/stop/configuration
* Advanced FILES visualizations
* Advanced BACKUP with graphics start/stop/configuration
* Set CROND start at any boot
* Set SAMBA start at any boot (7000 have to install samba-plugin)
* Advanced WEEKEPG options ( ...if you want use standard, set to blu-panel->options->weekepg )
* Automount HDD USB CF
* Advanced HDD ..set sleep and acoustic options
* Advanced SCRIPT options for personal set
* Advanced OpenVpn with graphics start/stop/configuration
* Advanced AMULE with graphics start/stop
* Advanced TORRENT with graphics start/stop/configuration (thanks to MaxZ4)
* Set personal AUTOSTART program*Display Function:
-------------------
* Set zap without OSD (if press OK return OSD)
* Set OSD always on when OK is pressed (required from nokia9k8)
* Display Snr, Agc, Ber
* Display video information
* Display frequency, polarization, symbol rate
* Display emu in use
* Display service providers name
* Display CaID, ProvID, PID (you can hide from options)
* Display Decoding Source (you can hide from options)
* Display long date format* Picon, already inserted to enigma code (thanks to jlmota)* SkinPreview (thanks to jlmota)
*
EMU:
------
* Set Default CAM
* Set channel CAM
* Set provider CAM
* Stop active CAM
* Set off/on and houres/minutes for autorestart CAM
*
Addons:
---------
* Internet addons download
* Manual addons install
* Remove installed addons
*
Misc:
------
* Italian, English language
* Many language in download
* Skin default - adtech* Picon is already installed (DB7000 have only default.png)
* Several Plugins/Games/Addons installed
**************************************************
DB500 :
-----------------------------------------
Buttons:
----------
* BLUE - Blu-Panel
* 2x BLUE - Emu-Panel
* YELLOW - Plugins
* BLUE - YELLOW > Addons
* BLUE - GREEN > Scripts
* RED - EPG
* GREEN - subservices
*
Features:
----------
* Advanced DNS with graphics start/stop/configuration
* Advanced FILES visualizations
* Set SAMBA start at any boot (have to install samba-plugin)
* Advanced SCRIPT options for personal set
* Advanced OpenVpn with graphics start/stop/configuration
* Set personal AUTOSTART program
* Change Remote Control driver ...set 500 or 7000
*
Display Function:
-------------------
* Set zap without OSD (only DB500)
* Set OSD always on when OK is pressed (only DB500)
* Display Snr, Agc, Ber
* Display video info
* Display frequency, polarization, symbol rate
* Display emu in use
* Display service providers name
* Display CaID, ProvID, PID (you can hide from options)
* Display Decoding Source (you can hide from options)
* Display long date format* Picon, already inserted to enigma code (thanks to jlmota)* SkinPreview (thanks to jlmota)*
EMU:
------
* Set Default CAM
* Set channel CAM
* Set provider CAM
* Stop active CAM
* Set off/on and houres/minutes for autorestart CAM
*
Addons:
---------
* Internet addons download
* Manual addons install
* Remove installed addons
*
Misc:
------
* Italian, English language
* Many language in download
* Skin default - adtech
* Picon is already installed (DB7000 have only default.png)
**************************************************
IPBOX200S:
------------------Buttons:
----------
* BLUE - Blu-Panel
* 2x BLUE - Emu-Panel* YELLOW - Plugins
* BLUE - YELLOW > Addons
* BLUE - GREEN > Scripts
* RED - EPG
* GREEN - subservices
*
Features:
----------
* Advanced DNS with graphics start/stop/configuration
* Advanced FILES visualizations
* Set SAMBA start at any boot (have to install samba-plugin)
* Advanced SCRIPT options for personal set
* Advanced OpenVpn with graphics start/stop/configuration
* Set personal AUTOSTART program
* Change Remote Control driver ...set 500 or 7000
*
Display Function:
-------------------
* Set zap without OSD (only DB500)
* Set OSD always on when OK is pressed (only DB500)
* Display Snr, Agc, Ber
* Display video info
* Display frequency, polarization, symbol rate
* Display emu in use
* Display service providers name
* Display CaID, ProvID, PID (you can hide from options)
* Display Decoding Source (you can hide from options)
* Display long date format* Picon, already inserted to enigma code (thanks to jlmota)* SkinPreview (thanks to jlmota)
*
EMU:
------
* Set Default CAM
* Set channel CAM
* Set provider CAM
* Stop active CAM
* Set off/on and houres/minutes for autorestart CAM
*
Addons:
---------
* Internet addons download
* Manual addons install
* Remove installed addons
*
Misc:
------
* Italian, English language
* Many language in download
* Skin default adtech
* Picon is already installed
* IPBOX200S have UHF in/out
* IPBOX200S ...after installed image ...have to set mID to 5620
* IPBOX200S ...for free memory (if is necessary):
1) Go to free channel
2) Restart enigma
3) Click to "Free Memory"
...now is possible to start/stop install/remove visualize script ecc..
********************************************************
 
Last edited by a moderator:

Acech

Registered
Messages
678
DM7020_SifTeam_1.8.2.1

DM7020_SifTeam_1.8.2.1


DB7020:
---------
* Usable to USB, CF or flash
* Enigma of: 29.08.2007
* OE Build Configuration:
BB_VERSION = "1.6.2"
OE_REVISION = "format_version "1"
new_manifest [0000000000000000000000000000000000000004]
old_revision [5f0748b962e87919f7165d5671690572c9b073af]"
TARGET_ARCH = "powerpc"
TARGET_OS = "linux"
MACHINE = "dm7020"
DISTRO = "opendreambox"
DISTRO_VERSION = "1.4.0"
TARGET_FPU = "soft"
 
Last edited by a moderator:
C

costa46

SifTeam 1.8.4 7020

DB7020:
---------
* Usable to HDD, USB, CF or flash
* Enigma of: 04.10.2007
* OE Build Configuration:
BB_VERSION = "1.6.2"
OE_REVISION = "format_version "1"
OE Build Configuration:
BB_VERSION = "1.6.2"
OE_REVISION = "format_version "1"
new_manifest [0000000000000000000000000000000000000004]
old_revision [10c5f2fafc04ff3138a01a90f709b9fbc76563c6]"
TARGET_ARCH = "powerpc"
TARGET_OS = "linux"

Code:
http://www.sifteam.eu
MACHINE = "dm7020"
DISTRO = "opendreambox"
DISTRO_VERSION = "1.4.0"
TARGET_FPU = "soft"




************************************************** ****



ALL DECODER ( some options not present to IPBOX200s - DM500 - DM5620 ):
Buttons:
----------
* BLUE - Blu-Panel
* BLUE > 1 sec. ..start plugin called BlueRelease (you rename another if want)
* 2x BLUE - Emu-Panel
* YELLOW - Plugins
* BLUE - YELLOW > Addons
* BLUE - GREEN > Scripts
* RED - WEEKEPG (thanks to MaxZ4)
* GREEN - subservices
*

Features:
----------
* Advanced FIREWALL with graphics start/stop/configuration
* Advanced SWAP file configuration, you can set swap in USB, CF or HDD (16mb or 32 mb)
* Advanced DNS with graphics start/stop/configuration
* Advanced FILES visualizations
* Advanced BACKUP with graphics start/stop/configuration
* Set CROND start at any boot
* Advanced crond system
* Set SAMBA start at any boot (7000 have to install samba-plugin)
* Advanced WEEKEPG options ( ...if you want use standard, set to blu-panel->options->weekepg )
* Automount HDD USB CF
* Advanced HDD ..set sleep and acoustic options
* Advanced SCRIPT options for personal set
* Advanced OpenVpn with graphics start/stop/configuration
* Advanced AMULE with graphics start/stop
* Advanced TORRENT with graphics start/stop/configuration (thanks to MaxZ4)
* Set personal AUTOSTART program
* Color set to RGB from default ( for lcd TV)
* Simple Set directory for picon and part of /var (bin and tuxbox, moved where you want)

Display Function:
-------------------
* Set zap without OSD (if press OK return OSD)
* Set OSD always on when OK is pressed (required from nokia9k8)
* Display Snr, Agc, Ber
* Display video information
* Display frequency, polarization, symbol rate
* Display emu in use
* Display service providers name
* Display CaID, ProvID, PID (you can hide from options)
* Display Decoding Source (you can hide from options)
* Display long date format
* Picon, already inserted to enigma code (thanks to jlmota)
* SkinPreview (thanks to jlmota)
*

EMU:
------
* Set Default CAM
* Set channel CAM
* Set provider CAM
* Stop active CAM
* Set off/on and houres/minutes for autorestart CAM
*

Addons:
---------
* Internet addons download
* Manual addons install
* Remove installed addons
*


Misc:
------
* Italian, English language
* Many language in download
* Skin default - tux ...from porto
* Picon is already installed (DB7000, IPBOX250, IPBOX350 ..have only default.png)
* Several Plugins/Games/Addons installed
* IPBOX250S IPBOX350S ...have to set mID 7000
* IPBOX200S ...autoset mID
* IPBOX200S have UHF in/out
* IPBOX200S ...for free memory (if is necessary):
1) Go to free channel
2) Restart enigma
3) Click to "Free Memory"
...now is possible to start/stop install/remove visualize script ecc..
************************************************** ******


THANKS TO:
--------------
DB500 > frog68.
DB7000 > ngc1927, MaxZ4.
DB7020 > ngc1927.
IPBOX200S > ngc1927.
IPBOX250S > astemio.
IPBOX350S > ngc1927, genge, voodo3
All IPBOX > ..special thanks to sandali for its branch of development ..and at Blakskettle for info and help.
FOR ALL > jlmota, porto, JoeBlack® ...and other?


VARIOUS:
-----------
This image is based, beyond that my "much" code and hard work, to Dream-cvs, parts of old Hydra
source (EMU/ADDONS ...emubroker is this) to little EasyEmu parts ...and other?


ATTENZIONE:
QUESTO FIRMWARE NON CONTIENE CHIAVI, NE' EMULATORI, NE'
INDIRIZZI PER SCARICARE MATERIALE ILLEGALE DI NESSUN TIPO.
L'AUTORE NON E' RESPONSABILE IN NESSUN MODO DELL'USO CHE
GLI UTENTI NE FARANNO, DI LORO SPONTANEA VOLONTA'.

THIS FIRMWARE DOES NOT INCLUDE KEYS, NOR EMULATORS, NOR
URLS FOR DOWNLOADING ILLEGAL STUFFS OF ANY TYPE.
AUTHOR IS NOT RESPONSIBLE IN ANY WAY FOR WHAT
THE USERS WILL DO WITH THIS FIRMWARE.
 

Acech

Registered
Messages
678
SifTeam-1.8.5-7020

SifTeam-1.8.5-7020


New Skin lite selectable on advanced menù
Osd Info fixed selectable on advanced menù
Hard disk management fixed
Ctdyn fixed (now show log on ctdyn menu panel)
Move Var plugin hdd/usb/hdd
Support for multiboot (Ipbox250/350 with flashwizard version for ipbox)
New Kernel module fdisk
New libc.so.6 (now newcs works good)
Vpn module Fixed for ipbox (download new vpn complete module from blue panel )
Mmc driver module inserted (for ipbox,Thanks to Sandali)
Minor bug fixed

* Usable to HDD, USB, CF or flash
* Enigma of: 11.11.2007
* OE Build Configuration:
BB_VERSION = "1.6.2"
OE_REVISION = "format_version "1"
OE Build Configuration:
BB_VERSION = "1.6.2"
OE_REVISION = "format_version "1"
new_manifest [0000000000000000000000000000000000000004]
old_revision [8f1ea263b352bd617459b584cd2b61bd42550b29]"
r /> TARGET_ARCH = "powerpc"
TARGET_OS = "linux"
MACHINE = "dm7020"
DISTRO = "opendreambox"
DISTRO_VERSION = "1.4.0"
TARGET_FPU = "soft"

http://www.sendspace.pl/file/2PtlHDKZ/ - 43MB !!
 

vegeku90

Registered
Messages
1,586
Dreambox 7020 new Sifteam

News relative all'immagine 1.8.5.1
-------------------------------------

CAMBIAMENTI ATTUALI:
--------------------

1) Aggiornato libreria libc.so.6 per problemi vari (il dm500 ora ha la sua personale)
2) Creato link per localizzazione in /var/share/locale
3) Tolto openvpn da tutti (in modo di avere un solo pacchetto openvpn)
4) Cambiato i picon con quelli di vhannibal (risparmia spazio e ci sono tutti i canali italia+sky) ..con i picon precedenti non bastava lo spazio per compilare.
5)* Aggiunto il pulsante formatta usb nella sezione HDD-USB ( SPERIMENTALE - ma funziona )
6) Aggiornato il cvs al 17-12-2007
7) Invertito i colori, blu e giallo, dei bottoni "stop cam" e "set extra" in "pannello emu" (in caso di cam incartata non si riesce a entrare nella gestione emu, ..parte di continuo stop emu)
8) Svuotato lo script00.sh ...uno se lo puo' personalizzare, e ormai non serviva piu' il contenuto
9) Aggiunto sviluppo immagine per ipbox400(presto online)
10) Aggiunto immagine per DM500PLUS
11) tolto il supporto ipkgpl (plugin) dalle immagini: dm500plus - dm600pvr - dm7020 (ormai usano tutti il blu-panel e i pacchetti .tar.gz)
12) Aggiunto l'eseguibile "awk" (link di busybox) nelle immagini dei 200-250-350-400-500-5620-7000
13) Sistemato ecm_info e netcard_info con i resoconti delle emu con card
14) Modificati timer.cpp ...ora se si usa weekepg, l'epg di base non si crea la propria cache.
15) Modificato patch per ipbox, ora nel timer l'opzione di default e' "recDVR"
16) Nazionalizzato weekepg e gestione backup/firmware




IPBOX200S:
-------------
Usable to flash
* Enigma of: 17.12.2007 (patched for native version)
* Linux version 2.6.17 (patched from sandali)
* Web Interface: 6.0.2-Expert
* Busybox 1.01
* U-BOOT 1.2.0 (patched from sandali)
* New driver from sandali
* Auto SET mID

IPBOX250S:
---------
Usable to HDD (CF) or flash
* Enigma of: 17.12.2007 (patched for native version)
* Linux version 2.6.17 (patched from sandali)
* Web Interface: 6.0.2-Expert
* Busybox 1.01
* U-BOOT 1.2.0 (patched from sandali)
* Tuxtxt v. 1.99
* New driver from sandali
* Have to SET mID 25

IPBOX350S:
---------
Usable to HDD, USB or flash
* Enigma of: 17.12.2007 (patched for native version)
* Linux version 2.6.17 (patched from sandali)
* Web Interface: 6.0.2-Expert
* Busybox 1.01
* U-BOOT 1.2.0 (patched from sandali)
* Tuxtxt v. 1.99
* New driver from sandali
* Have to SET mID 26

IPBOX400S:
---------
Usable to HDD or flash
* Enigma of: 17.12.2007 (patched for native version)
* Linux version 2.6.17 (patched from sandali)
* Web Interface: 6.0.2-Expert
* Busybox 1.01
* U-BOOT 1.2.0 (patched from sandali)
* Tuxtxt v. 1.99
* New driver from sandali
* Have to SET mID 40

DB500:
--------
Usable to flash
* Enigma of: 17.12.2007
* Linux version 2.6.9
* GCC 3.4.4 Original CVS
* Web Interface: 6.0.2-Expert
* Busybox 1.01
* Tuxtxt v. 1.99

DB5620:
--------
Usable to flash
* Enigma of: 17.12.2007
* Linux version 2.6.9
* GCC 3.4.4 Original CVS
* Web Interface: 6.0.2-Expert
* Busybox 1.01
* Tuxtxt v. 1.99

DB7000:
---------
Usable to HDD, USB, CF or flash
* Enigma of: 17.12.2007
* Linux version 2.6.9
* GCC 3.4.4 Original CVS 1.1.0
* Web Interface: 6.0.2-Expert
* Busybox 1.01
* Tuxtxt v. 1.99

DB7020:
---------
* Usable to HDD, USB, CF or flash
* Enigma of: 17.12.2007
* OE Build Configuration:
BB_VERSION = "1.6.2"
OE_REVISION = "format_version "1"
OE Build Configuration:
BB_VERSION = "1.6.2"
OE_REVISION = "format_version "1"
new_manifest [0000000000000000000000000000000000000004]
old_revision [460f9823f9764f1a1a9beccd73ba4d7dfaa19804]"
TARGET_ARCH = "powerpc"
TARGET_OS = "linux"
MACHINE = "dm7020"
DISTRO = "opendreambox"
DISTRO_VERSION = "1.4.0"
TARGET_FPU = "soft"

DB600PVR:
---------
* Usable to HDD or flash
* Enigma of: 17.12.2007
OE Build Configuration:
BB_VERSION = "1.6.2"
OE_REVISION = "format_version "1"
new_manifest [0000000000000000000000000000000000000004]
old_revision [460f9823f9764f1a1a9beccd73ba4d7dfaa19804]"
TARGET_ARCH = "powerpc"
TARGET_OS = "linux"
MACHINE = "dm600pvr"
DISTRO = "opendreambox"
DISTRO_VERSION = "1.4.0"
TARGET_FPU = "soft"
************************************************** ****

DB500PLUS:
---------
* Usable to flash
* Enigma of: 17.12.2007
OE Build Configuration:
BB_VERSION = "1.6.2"
OE_REVISION = "format_version "1"
new_manifest [0000000000000000000000000000000000000004]
old_revision [460f9823f9764f1a1a9beccd73ba4d7dfaa19804]"
TARGET_ARCH = "powerpc"
TARGET_OS = "linux"
MACHINE = "dm500plus"
DISTRO = "opendreambox"
DISTRO_VERSION = "1.4.0"
TARGET_FPU = "soft"
************************************************** ****


ALL DECODER ( same options not present to IPBOX200s - DM500 - DM500+ - DM5620 ):
Buttons:
----------
* BLUE - Blue-Panel
* 2x BLUE - Emu-Panel
* YELLOW - Plugins
* YELLOW > 1 sec. ..start plugin called sifteam (rename any plugin you want use with this option)
* BLUE - YELLOW > Addons
* BLUE - GREEN > Scripts
* RED - WEEKEPG (thanks to MaxZ4)
* GREEN - subservices
*

Features:
----------
* Advanced FIREWALL with graphics start/stop/configuration
* Advanced SWAP file configuration, you can set swap in USB, CF or HDD (16mb or 32 mb)
* Advanced DNS with graphics start/stop/configuration
* Advanced FILES visualizations
* Advanced BACKUP with graphics start/stop/configuration
* Set CROND start at any boot
* Advanced crond system configuration
* Set SAMBA start at any boot (7000 have to install samba-plugin)
* Advanced WEEKEPG options ( ...if you want use standard, set to blue-panel->options->weekepg )
* Automount HDD USB CF
* Advanced HDD ..set sleep and acoustic options
* Advanced SCRIPT options for personal set
* Advanced OpenVpn with graphics start/stop/configuration
* Advanced AMULE with graphics start/stop
* Advanced TORRENT with graphics start/stop/configuration (thanks to MaxZ4)
* Set personal AUTOSTART program
* Color set to RGB from default ( for lcd TV)
* Simple Set directory for picon
* Inserted DM7020 Network Fix

Display Function:
-------------------
From 1.8.5 more of this information is settable from Menu-Advanced..
* Set zap without OSD (if press OK return OSD)
* Set OSD always on when OK is pressed (required from nokia9k8)
* Display Snr, Agc, Ber
* Display video information
* Display frequency, polarization, symbol rate
* Display emu in use
* Display service providers name
* Display CaID, ProvID, PID (you can hide from options)
* Display Decoding Source (you can hide from options)
* Display long date format
* Picon, already inserted to enigma code (thanks to jlmota)
* SkinPreview (thanks to jlmota)
* Skin Lite/Full, when Lite ..if no OSD present, and press OK see Full (thanks to tension for help)
* skin by porto for Dreambox
* skin by porto for Ipbox


EMU:
------
* Set Default CAM
* Set channel CAM
* Set provider CAM
* Stop active CAM
* Set off/on and hours/minutes for autorestart CAM
*

Addons:
---------
* Internet addons download
* Manual addons install
* Remove installed addons
*


Misc:
------
* Italian, English language
* Many language in download
* Skin default - porto
* Picon for -skyit+italian channel- is already installed
* Several Plugins/Games/Addons installed
* IPBOX250S ...autoset mID
* IPBOX350S ...autoset mID
* IPBOX200S ...autoset mID
* IPBOX200S have UHF in/out
* IPBOX200S ...for free memory (if is necessary):
1) Go to free channel
2) Click to "Free Memory"
...now is possible to start/stop install/remove visualize script ecc..
************************************************** ******


THANKS TO:
--------------
DM500 > frog68
DM500+ >
DM600 > neri73
DM7000 > MaxZ4, adamo49, ngc1927
DM5620 >
DM7020 > ngc1927
IPBOX200S > ngc1927, genge
IPBOX250S > astemio, neri73
IPBOX350S > ngc1927, genge, voodo3
IPBOX400S > blakskettle
All IPBOX > ..special thanks to sandali for its branch of development ..and Blakskettle for any info.
FOR ALL > porto, jlmota, MaxZ4, adga ...and other?

Thanks to all and good fun
************************************************** ******


VARIOUS:
-----------
This image is based, beyond that my "much" code and hard work, to Dream-cvs, parts of old Hydra
source (EMU/ADDONS ...emubroker is this) ...and other?
************************************************** ******



************************************************** ****************
ATTENZIONE:
QUESTO FIRMWARE NON CONTIENE CHIAVI, NE' EMULATORI, NE'
INDIRIZZI PER SCARICARE MATERIALE ILLEGALE DI NESSUN TIPO.
L'AUTORE NON E' RESPONSABILE IN NESSUN MODO DELL'USO CHE
GLI UTENTI NE FARANNO, DI LORO SPONTANEA VOLONTA'.

THIS FIRMWARE DOES NOT INCLUDE KEYS, NOR EMULATORS, NOR
URLS FOR DOWNLOADING ILLEGAL STUFFS OF ANY TYPE.
AUTHOR IS NOT RESPONSIBLE IN ANY WAY FOR WHAT
THE USERS WILL DO WITH THIS FIRMWARE.
************************************************** ****************
 
Last edited:

Demolition

Registered
Messages
203
SifTeam-1.8.5.2BETA2-7020.nfi

SifTeam-1.8.5.2BETA2-7020.nfi

No readme ( yet )
 
Last edited by a moderator:

Demolition

Registered
Messages
203
SifTeam-1.8.5.2 BETA3 DM7020s 01-01-2008

SifTeam-1.8.5.2 BETA3 DM7020s 01-01-2008

Relativo all'immagine 1.8.5.2
-------------------------------------

CAMBIAMENTI ATTUALI:
--------------------

1) Sistemato openvpn (tolto diverse parti rimaste nei 7020-600pvr-500plus)
2) Sistemato ancora openvpn (ora compare nel pannello dei 500-5620-200)
3) Aggiunto il controllo dei dischi nel 250 (se uno ha sia CF che HDD monta master la CF e slave l'HDD, questo
sistema e' stato riportato come migliore ed e' il piu' usato)
4) Aggiunto le opzioni per DMA e 32bit dei dischi, nel file di avvio.
5) Aggiunto l'opzione "Always 16:9" nelle immagini IPBOX
6) Modificato la variabile che visualizza la frequenza (osd), ora compare subito
7) Sistemato un BUG nella gestione xml ..ora tutti i plugin che usano xml non crashano enigma
(tipo rss, wheather, ecc.. )
8) Aggiornato il cvs al 01.01.2008




********************* LEGGERE ATTENTAMENTE PRIMA DI UPGRADARE L'IMMAGINE *********************
********************************* READ BEFORE UPGRADE IMAGE **********************************

NOTE:
------

INFO PER UPGRADE DALLA VERSIONE 1.8.5.1 - INFO FOR UPGRADE FROM 1.8.5.1
-----------------------------------------------------------------------

1) Il file /var/etc/rcS.d/S70user_start.sh e' diventato /var/etc/rcS.d/S99user_start.sh
quindi in caso si voglia riutilizzare la vecchia /var spostata e' necessario rinominarlo.

File /var/etc/rcS.d/S70user_start.sh is now called /var/etc/rcS.d/S99user_start.sh
if you want use old moved /var ..please rename it


2) Se si usa lo skin di default seguire le istruzioni sotto:
If use default skin ..please read instruction:

Ora lo skin DI DEFAULT e' cambiato in HappyNewYear, quindi se si vuol usare la /var spostata c'e' bisogno di
modificare il file /var/tuxbox/config/enigma/config
cambiare la stringa da:
s:/ezap/ui/skin=/share/tuxbox/enigma/skins/xmas.esml
in:
s:/ezap/ui/skin=/share/tuxbox/enigma/skins/happy.esml
e poi upgradare l'immagine.

Default skin is changed to HappyNewYear, if you want use old moved /var have:
modify file /var/tuxbox/config/enigma/config
from:
s:/ezap/ui/skin=/share/tuxbox/enigma/skins/xmas.esml
to
s:/ezap/ui/skin=/share/tuxbox/enigma/skins/happy.esml


INFO PER UPGRADE DALLA VERSIONE 1.8.5.2bETA2 - INFO FOR UPGRADE FROM 1.8.5.2bETA2
---------------------------------------------------------------------------------

1) Per chi usa la /var spostata, il plugin weekepg deve essere aggiornato, scaricabile
da online tramite blu-panel.
Il nuovo cvs del 01.01.2008 con cui e' compilata la B3 non e' compatibile con il
cvs del 16.12.2007 con cui e' compilato weekepg comprese nelle immagini precedenti.

If use moved /var ..please upgrade from online package weekepg, new cvs enigma i use for
compile B3 not is compatible with cvs is compiled weekepg from old image.

removed attachment, old one and wasting space
 

vegeku90

Registered
Messages
1,586
SifTeam 1.8.6 [DM 7020]

SifTeam 1.8.6 [DM 500-500plus-5620-600pvr-70*0]


Coder: ngc1927
--------------
Aiutanti: porto - frog68 - MaxZ4 - jlmota
-----------------------------------------
Betatester: genge - astemio - neri73 - voodo3 - theseven - biondo79 - superfly - getdownup

Changelog Relativo all'immagine 1.8.6
----------------------------


1) Sistemato openvpn (tolto diverse parti rimaste nei 7020-600pvr-500plus)
2) Sistemato ancora openvpn (ora compare nel pannello dei 500-5620-200)
3) Aggiunto il controllo dei dischi nel 250 (se uno ha, sia CF che HDD, monta master la CF e slave l'HDD, questo
sistema e' stato riportato come migliore ed e' il piu' usato)
4) Aggiunto le opzioni per DMA e 32bit dei dischi, nel file di avvio.
5) Aggiunto l'opzione "Always 16:9" nelle immagini IPBOX
6) Modificato la variabile che visualizza la frequenza (osd), ora compare subito
7) Sistemato un BUG nella gestione xml ..ora tutti i plugin che usano xml non crashano enigma
(tipo rss, wheather, ecc.. )
8) Modificati script per stop_emu e restart_emu
9) Fix riavvio emu e autoriavvio openvpn (7020 - 500plus - 600pvr)
10) Fix vari per crond
11) Aggiunto start-stop-daemon (busybox link)
12) Inserito minicron e creato interfaccia per usarlo, con diversi script gia' inseriti da poter usare
13) Compilato immagine per 200s con 64mb
14) Adattate le immagini al dropbear(ssh)
15) Aggiornato il cvs al 20.01.2008 (tuxbox-plugins e tuxbox-plugins-enigma sono del 01-01-2008, i nuovi non
compilano con le ultime patch inserite dalla Dream)
16) Modificato il pannello (Opzioni Varie) - tolto amule e torrent (..aggiornato i pacchetti amule e torrent
con i relativi plugins) ..e inserito dropbearSSH
17) Fixato weekepg (grazie MaxZ4 ) ..e tutto il necessario per lui.
18) Aggiunto il PATH /var/sbin in /var/etc/profile
19) Nuovo libc.so.6 con supporto ssh
20) Inserito libutil.so.1 e libnsl.so.1 in /lib
21) Finito il supporto a ssh e sftp.
22) Aggiunto /bin/prockill
23) Aggiunto telnet (link busybox) e relativa nuova libc.so.6
24) Cambiato i loghi e skin a tutte le immagini
25) Ancora una sistemata per formattare/montare usb da blu-panel
26) Unificato url download addons


********************* LEGGERE ATTENTAMENTE PRIMA DI UPGRADARE L'IMMAGINE *********************
********************************* READ BEFORE UPGRADE IMAGE **********************************

NOTE:
------

INFO PER UPGRADE DALLA VERSIONE 1.8.5.1 - INFO FOR UPGRADE FROM 1.8.6 WITH MOVED /VAR (Valid only for dreambox7000)
-------------------------------------------------------------------------------------

Questa versione contiene molti cambiamenti, se non si vuol ricreare da 0 la /var, usare questo sistema.
Installare, ..muovere la /var, ..entrare nel ricevitore con un client ftp (o da telnet), ..copiare tutto il contenuto
di /var_init/ in /var (se richiesto confermare la sovrascrittura).

This version have very much change, if not want recreate from 0 your /var, use this system.
Install, ..move /var, ..go to receiver from ftp client (or telnet), ..copy all from /var_init to /var (if
request conferm overwrite).


Se si usa lo skin di default seguire le istruzioni sotto:
If use default skin ..please read instruction:

Ora lo skin DI DEFAULT e' cambiato in golden, quindi se si vuol usare la /var spostata c'e' bisogno di
modificare il file /var/tuxbox/config/enigma/config
cambiare la stringa da:
s:/ezap/ui/skin=/share/tuxbox/enigma/skins/xmas.esml
in:
s:/ezap/ui/skin=/share/tuxbox/enigma/skins/golden.esml
e poi upgradare l'immagine.

Default skin is changed to golden, if you want use old moved /var have:
modify file /var/tuxbox/config/enigma/config
from:
s:/ezap/ui/skin=/share/tuxbox/enigma/skins/xmas.esml
to
s:/ezap/ui/skin=/share/tuxbox/enigma/skins/golden.esml





DB500:
--------
Usable to flash
* Enigma of: 20.01.2008
* Linux version 2.6.9
* GCC 3.4.4 Original CVS
* Web Interface: 6.0.2-Expert
* Busybox 1.01
* Tuxtxt v. 1.99

DB5620:
--------
Usable to flash
* Enigma of: 20.01.2008
* Linux version 2.6.9
* GCC 3.4.4 Original CVS
* Web Interface: 6.0.2-Expert
* Busybox 1.01
* Tuxtxt v. 1.99

DB7000:
---------
Usable to HDD, USB, CF or flash
* Enigma of: 20.01.2008
* Linux version 2.6.9
* GCC 3.4.4 Original CVS 1.1.0
* Web Interface: 6.0.2-Expert
* Busybox 1.01
* Tuxtxt v. 1.99

DB7020:
---------
* Usable to HDD, USB, CF or flash
* Enigma of: 20.01.2008
* OE Build Configuration:
BB_VERSION = "1.6.2"
OE_REVISION = "format_version "1"
OE Build Configuration:
BB_VERSION = "1.6.2"
OE_REVISION = "format_version "1"
new_manifest [0000000000000000000000000000000000000004]
old_revision [6280190b0115512a1928c502dbc16f78b46fcf6f]"
TARGET_ARCH = "powerpc"
TARGET_OS = "linux"
MACHINE = "dm7020"
DISTRO = "opendreambox"
DISTRO_VERSION = "1.4.0"
TARGET_FPU = "soft"

DB600PVR:
---------
* Usable to HDD or flash
* Enigma of: 20.01.2008
OE Build Configuration:
BB_VERSION = "1.6.2"
OE_REVISION = "format_version "1"
new_manifest [0000000000000000000000000000000000000004]
old_revision [6280190b0115512a1928c502dbc16f78b46fcf6f]"
TARGET_ARCH = "powerpc"
TARGET_OS = "linux"
MACHINE = "dm600pvr"
DISTRO = "opendreambox"
DISTRO_VERSION = "1.4.0"
TARGET_FPU = "soft"
************************************************** ****

DB500PLUS:
---------
* Usable to flash
* Enigma of: 20.01.2008
OE Build Configuration:
BB_VERSION = "1.6.2"
OE_REVISION = "format_version "1"
new_manifest [0000000000000000000000000000000000000004]
old_revision [6280190b0115512a1928c502dbc16f78b46fcf6f]"
TARGET_ARCH = "powerpc"
TARGET_OS = "linux"
MACHINE = "dm500plus"
DISTRO = "opendreambox"
DISTRO_VERSION = "1.4.0"
TARGET_FPU = "soft"
************************************************** ****


ALL DECODER ( same options not present to IPBOX200s - DM500 - DM500+ - DM5620 ):
Buttons:
----------
* BLUE - Blue-Panel
* 2x BLUE - Emu-Panel
* YELLOW - Plugins
* YELLOW > 1 sec. ..start plugin (sifteam.cfg sifteam.so, rename any plugin you want use with this option)
* BLUE - YELLOW > Addons
* BLUE - GREEN > Scripts
* RED - WEEKEPG (thanks to MaxZ4)
* GREEN - subservices
*

Features:
----------
* Advanced FIREWALL with graphics start/stop/configuration
* Advanced SWAP file configuration, you can set swap in USB, CF or HDD (16mb or 32 mb)
* Advanced DNS with graphics start/stop/configuration
* Advanced FILES visualizations
* Advanced BACKUP with graphics start/stop/configuration
* Set MINICROND start at any reboot
* Advanced MINICROND system configuration, with more script added (restart cam, restart openvpn ecc..)
* Set SAMBA start at any boot (have to install package)
* Advanced WEEKEPG options ( ..if you want use standard, set to blue-panel->options->weekepg )
(for now log is not possible ..only, option is visible ..for possible future changes)
* Automount HDD USB CF
* Advanced HDD ..set sleep and acoustic options
* Formatting USB (to HDD option)
* Advanced SCRIPT options for personal set
* Advanced OPENVPN with graphics start/stop/configuration (have to install package)
* OPENSSH support (have to install package)
* Advanced DROPBEARSSH with graphics start/stop/configuration (have to install package)
* Color set to RGB from default ( for lcd TV)
* Simple Set directory for picon
* Inserted DM7020 Network Fix
* Reiserfs and Fat32 supported

Display Function:
-------------------
From 1.8.5 more of this information is settable from Menu-Advanced..
* Set zap without OSD (if press OK return OSD)
* Set OSD always on when OK is pressed (required from nokia9k8)
* Display Snr, Agc, Ber
* Display video information
* Display frequency, polarization, symbol rate
* Display emu in use
* Display service providers name
* Display CaID, ProvID, PID (you can hide from options)
* Display Decoding Source (you can hide from options)
* Display long date format
* Picon, already inserted to enigma code (thanks to jlmota)
* SkinPreview (thanks to jlmota)
* Skin Lite/Full, when Lite ..if no OSD present, and press OK see Full (thanks to tension for help)
* skin by porto for Dreambox
* skin by porto for Ipbox


EMU:
------
* Set Default CAM
* Set channel CAM
* Set provider CAM
* Stop active CAM
*

Addons:
---------
* Internet addons download
* Manual addons install
* Remove installed addons
*


Misc:
------
* Italian, English language
* Many language in download
* Skin default - porto
* Picon for -skyit+italian channel- is already installed
* Several Plugins/Games/Addons installed
* IPBOX200S have UHF in/out
* IPBOX200S ...for free memory (if is necessary):
1) Go to free channel
2) Click to "Free Memory"
...now is possible to start/stop install/remove visualize script ecc..
************************************************** ******


THANKS TO:
--------------
DM500 > frog68
DM500+ >
DM600 > neri73
DM7000 > ngc1927
DM5620 > Maxz4
DM7020 > ngc1927
IPBOX200S > genge
IPBOX200S 64mb > Cupidz,pog
IPBOX250S > astemio, neri73,biondo79
IPBOX350S > ngc1927, genge, voodo3,getdownup,superfly
IPBOX400S > voodo3,
All IPBOX > ..special thanks to sandali for its branch of development ..and Blakskettle for any info.
FOR ALL > porto, jlmota, MaxZ4,frog68,astemio for hard work
Special thanks to UKiller Bestia and all sifteam people
Thanks to all and good fun
************************************************** ******
 

vegeku90

Registered
Messages
1,586
SifTeam 1.8.8 [Dm500-500plus-600pvr-70x0-56x0]

logosif.jpg






Changelog relativo all'immagine 1.8.8
-----------------------------

Coder: ngc1927
--------------
Aiutanti: porto - frog68 - MaxZ4 - jlmota
-----------------------------------------
Betatester:

genge = 350 - 200

astemio = 250 - dm7020

frog68 = dm500

neri73 = dm7000S

voodo3 = 400

theseven = dm500s - dm7020s

black33 = dm600pvr

biondo79 = 250s - DM500s - DM600PVR

imasna = dm600pvr

piefav = dm7020

-----------------------------------------------------------------------------


CAMBIAMENTI:
------------
1) Riscritto oltre la ****' del codice, e aggiunto altrettanto di nuovo
2) Aggiornato il cvs al 25.02.2008
3) Tolto weekepg come EPG di default (si installa il preferito poi si imposta dal pannello di controllo)
4) Gli openembedded hanno il samba (3.0) installato, gli altri no' (openembedded= 7020 - 600pvr - 500plus)


NOTE:
-----

1 click bottone blu = pannello EMU
1 click bottone giallo = plugins
1 click bottone verde = pannello ADDONS
1 click bottone rosso = EPG personale impostabile da pannello di controllo

bottone blu premuto + di 1 secondo = pannello di controllo
bottone giallo premuto + di 1 secondo = plugins personale impostabile da pannello di controllo
bottone verde premuto + di 1 secondo = plugins personale impostabile da pannello di controllo
bottone rosso premuto + di 1 secondo = niente ..e quante robe vuoi?
(..non si puo' impostare, se uno usa l'epg base serve per selezionare la visualizzazione dell'epg)

Pannello di controllo in modo "visuale" (ad icone)

Pannello EMU mostra l'icona di una card che varia se il canale e' decodificato da:
CARD
EMU
NETWORK

Alcuni pacchetti sono cambiati (si trovano dentro ADDONS)

:thum:
 

marce

VIP
Messages
7,115
SifTeam 1.8.8 DM 7020

SifTeam 1.8.8 DM 7020

Description:

SifTeam 1.8.8 DM 7020

--------------------------------------------------------------------------------

Changelog relativo all'immagine 1.8.8
-----------------------------

Coder: ngc1927
--------------
Aiutanti: porto - frog68 - MaxZ4 - jlmota
-----------------------------------------
Betatester:

genge = 350 - 200

astemio = 250 - dm7020

frog68 = dm500

neri73 = dm7000S

voodo3 = 400

theseven = dm500s - dm7020s

black33 = dm600pvr

biondo79 = 250s - DM500s - DM600PVR

imasna = dm600pvr

piefav = dm7020

-----------------------------------------------------------------------------


CAMBIAMENTI:
------------
1) Riscritto oltre la ****' del codice, e aggiunto altrettanto di nuovo
2) Aggiornato il cvs al 25.02.2008
3) Tolto weekepg come EPG di default (si installa il preferito poi si imposta dal pannello di controllo)
4) Gli openembedded hanno il samba (3.0) installato, gli altri no' (openembedded= 7020 - 600pvr - 500plus)


NOTE:
-----

1 click bottone blu = pannello EMU
1 click bottone giallo = plugins
1 click bottone verde = pannello ADDONS
1 click bottone rosso = EPG personale impostabile da pannello di controllo

bottone blu premuto + di 1 secondo = pannello di controllo
bottone giallo premuto + di 1 secondo = plugins personale impostabile da pannello di controllo
bottone verde premuto + di 1 secondo = plugins personale impostabile da pannello di controllo
bottone rosso premuto + di 1 secondo = niente ..e quante robe vuoi?
(..non si puo' impostare, se uno usa l'epg base serve per selezionare la visualizzazione dell'epg)

Pannello di controllo in modo "visuale" (ad icone)

Pannello EMU mostra l'icona di una card che varia se il canale e' decodificato da:
CARD
EMU
NETWORK

Alcuni pacchetti sono cambiati (si trovano dentro ADDONS)

removed attachment, old one and wasting space
 

marce

VIP
Messages
7,115
Sifteam 1.8.8.1 dm7020

Sifteam 1.8.8.1 dm7020

Related to the image 1.8.8.1

CHANGES:
------------
1) adds the option for settare the green button as subservice (if pressed + of 1 according to)
2) correct Openvpn (riscritto completely the scirpt)
3) correct minicron (it didn't save the fifth option)
4) adds the option "to Syncronize the online date" (In Expert Menu')

* Usable to HDD, USB, CF or flash
* Enigma of: 25.02.2008
* OE Build Configuration:
BB_VERSION = "1.6.2"
OE_REVISION = "format_version "1"
OE Build Configuration:
BB_VERSION = "1.6.2"
OE_REVISION = "format_version "1"
new_manifest [0000000000000000000000000000000000000004]
old_revision [3da3ba134ac8cb954b8257512cf57c0aa03312ea]"
TARGET_ARCH = "powerpc"
TARGET_OS = "linux"
MACHINE = "dm7020"
DISTRO = "opendreambox"
DISTRO_VERSION = "1.4.0"
TARGET_FPU = "soft"
 
Last edited:
B

boxgot

SifTeam-1.8.9A-7020

SifTeam-1.8.9A-7020

1) Aggiornato il cvs al 20.03.2008
2) riabilitato il Debug in enigma
3) Il modulo CI e' presente in tutti i menu' (anche nei decoder che non hanno CI) in modo
che tutti possano selezionare l'opzione "Trattare due canali" (vederne uno e
registrarne un'altro, ..chiaramente dallo stesso transponder, canali criptati)
4) Sistemato il bottone giallo in caso gli si associ il Timeshift (introdotto dagli ultimi CVS)
( > 1 secondo ..come consigliato da black33)
5) Aggiunto il supporto a NFS (e i vari supporti nel kernel)
6) Rimossi i "picon" di base dal dm7000 (non bastava lo spazio per gestire NFS) e quindi anche
dagli Ipbox 250 - 350 - 400 (derivano dal ramo del 7000) (e poi in questi modelli si possono
mettere in un supporto esterno)
7) Reinserito Gestione Dischi e Gestione Swap (sono in "Pannello di Controllo" HDD/USB)
8) Aggiunta l'opzione per poter disabilitare, le funzioni principali, dei 4 bottoni colorati.
9) Modificata WebIf per visualizzare l'ecm.info (reload ogni 6 sec.)
10) Adattati gli ipbox alla nuova V5 di "sandali"

removed attachment, old one and wasting space
 
Status
Not open for further replies.
Top