as you configure the key biss with oscam?

EnoSat

Senior Member
Messages
1,952
Here it is after restarting oscam.

https://pastebin.com/n6Tzz07x

still ECM pid -> 0500

sample my log for BISS
Code:
2017/04/01 20:11:45 786A3642 c   (dvbapi) Demuxer 0 ecmpid 0 CAID: 2600 ECM_PID: 1FFF PROVID: 000000 
2017/04/01 20:11:45 786A3642 c   (dvbapi) Demuxer 0 found 1 ECMpids and 2 STREAMpids in caPMT
2017/04/01 20:11:45 786A3642 c   (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 2600 PROVID 000000 ECMPID 1FFF ANY CHID PMTPID 005A VPID 0064
2017/04/01 20:11:45 786A3642 c      (ecm) get cw for ecm:
2017/04/01 20:11:45 786A3642 c      (ecm)   80 00 06 00 01 00 64 00 6E 
2017/04/01 20:11:45 4B865770 p   (reader) casc ecm (BISS):
2017/04/01 20:11:45 4B865770 p   (reader)   80 00 06 00 01 00 64 00 6E 
2017/04/01 20:11:45 4B865770 p  (constcw) Searching CW for CAID 2600 PROVID 000000 SRVID 0001 ECMPID 1FFF PMTPID 005A VPID 0064
2017/04/01 20:11:45 4B865770 p  (constcw) Entry found: 2600@000000:0001:005A:1FFF:0000:C4 8D AF 00 8F DA 97 00 C4 8D AF 00 8F DA 97 00 
2017/04/01 20:11:45 2AF0667E r ecm:
2017/04/01 20:11:45 2AF0667E r 80 00 06 00 01 00 64 00 6E 
2017/04/01 20:11:45 2AF0667E r      (emu) Key not found: F 11FFF 00
2017/04/01 20:11:45 2AF0667E r      (emu) Key not found: F 11FFF 01
2017/04/01 20:11:45 2AF0667E r      (emu) Key not found: F 10064 00
2017/04/01 20:11:45 2AF0667E r      (emu) Key not found: F 10064 01
2017/04/01 20:11:45 2AF0667E r      (emu) Key not found: F 1006E 00
2017/04/01 20:11:45 2AF0667E r      (emu) Key not found: F 1006E 01
2017/04/01 20:11:45 2AF0667E r      (emu) Key not found: F 11FFF 00
2017/04/01 20:11:45 2AF0667E r      (emu) Key not found: F 11FFF 01
2017/04/01 20:11:45 2AF0667E r      (emu) ECM failed: Key not found
2017/04/01 20:11:45 786A3642 c      (ecm) LOCAL (2600@000000/0000/0001/09:F0ADF73644526F022213C2C08ED48452): found (5 ms) by BISS (P/11/11/11) - Kanal D+SIC+Snai Live/AlmaS
2017/04/01 20:11:45 786A3642 c      (ecm) cw:
2017/04/01 20:11:45 786A3642 c      (ecm)   C4 8D AF 00 8F DA 97 00 C4 8D AF 00 8F DA 97 00

PS1: remove your ERROR readers
2017/04/01 19:34:51 7B052308 r (reader) lower_card [internal] ERROR: Opening device /dev/sci0 (errno=2 No such file or directory)
2017/04/01 19:34:51 7B052308 r (reader) lower_card [internal] Cannot open device: /dev/sci0
2017/04/01 19:34:51 4C6F5441 p (constcw) Local reader: biss (file: /usr/keys/constant.cw)
2017/04/01 19:34:51 3741FFCA r (reader) upper_card [internal] ERROR: Opening device /dev/sci1

PS2: missing right line in constantcw file for this
2017/04/01 19:35:12 4C6F5441 p (constcw) Searching CW for CAID 2600 PROVID 000000 SRVID 0004 ECMPID 0500 PMTPID 0103 VPID 0203
 
Last edited:

zoobihoobi

Registered
Messages
55
You mean, I need to remove lower_card and Upper_card reader in oscam.server file?

I did not get the point related to ecim pid 500 what needs to done
 

zoobihoobi

Registered
Messages
55
still ECM pid -> 0500

sample my log for BISS
Code:
2017/04/01 20:11:45 786A3642 c   (dvbapi) Demuxer 0 ecmpid 0 CAID: 2600 ECM_PID: 1FFF PROVID: 000000 
2017/04/01 20:11:45 786A3642 c   (dvbapi) Demuxer 0 found 1 ECMpids and 2 STREAMpids in caPMT
2017/04/01 20:11:45 786A3642 c   (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 2600 PROVID 000000 ECMPID 1FFF ANY CHID PMTPID 005A VPID 0064
2017/04/01 20:11:45 786A3642 c      (ecm) get cw for ecm:
2017/04/01 20:11:45 786A3642 c      (ecm)   80 00 06 00 01 00 64 00 6E 
2017/04/01 20:11:45 4B865770 p   (reader) casc ecm (BISS):
2017/04/01 20:11:45 4B865770 p   (reader)   80 00 06 00 01 00 64 00 6E 
2017/04/01 20:11:45 4B865770 p  (constcw) Searching CW for CAID 2600 PROVID 000000 SRVID 0001 ECMPID 1FFF PMTPID 005A VPID 0064
2017/04/01 20:11:45 4B865770 p  (constcw) Entry found: 2600@000000:0001:005A:1FFF:0000:C4 8D AF 00 8F DA 97 00 C4 8D AF 00 8F DA 97 00 
2017/04/01 20:11:45 2AF0667E r ecm:
2017/04/01 20:11:45 2AF0667E r 80 00 06 00 01 00 64 00 6E 
2017/04/01 20:11:45 2AF0667E r      (emu) Key not found: F 11FFF 00
2017/04/01 20:11:45 2AF0667E r      (emu) Key not found: F 11FFF 01
2017/04/01 20:11:45 2AF0667E r      (emu) Key not found: F 10064 00
2017/04/01 20:11:45 2AF0667E r      (emu) Key not found: F 10064 01
2017/04/01 20:11:45 2AF0667E r      (emu) Key not found: F 1006E 00
2017/04/01 20:11:45 2AF0667E r      (emu) Key not found: F 1006E 01
2017/04/01 20:11:45 2AF0667E r      (emu) Key not found: F 11FFF 00
2017/04/01 20:11:45 2AF0667E r      (emu) Key not found: F 11FFF 01
2017/04/01 20:11:45 2AF0667E r      (emu) ECM failed: Key not found
2017/04/01 20:11:45 786A3642 c      (ecm) LOCAL (2600@000000/0000/0001/09:F0ADF73644526F022213C2C08ED48452): found (5 ms) by BISS (P/11/11/11) - Kanal D+SIC+Snai Live/AlmaS
2017/04/01 20:11:45 786A3642 c      (ecm) cw:
2017/04/01 20:11:45 786A3642 c      (ecm)   C4 8D AF 00 8F DA 97 00 C4 8D AF 00 8F DA 97 00

PS1: remove your ERROR readers
2017/04/01 19:34:51 7B052308 r (reader) lower_card [internal] ERROR: Opening device /dev/sci0 (errno=2 No such file or directory)
2017/04/01 19:34:51 7B052308 r (reader) lower_card [internal] Cannot open device: /dev/sci0
2017/04/01 19:34:51 4C6F5441 p (constcw) Local reader: biss (file: /usr/keys/constant.cw)
2017/04/01 19:34:51 3741FFCA r (reader) upper_card [internal] ERROR: Opening device /dev/sci1

PS2: missing right line in constantcw file for this
2017/04/01 19:35:12 4C6F5441 p (constcw) Searching CW for CAID 2600 PROVID 000000 SRVID 0004 ECMPID 0500 PMTPID 0103 VPID 0203

I removed lower and upper card reader in Oscam.server file
My constant.cw file is like this

PTV SPORTS Paksat (38.E)
TP: 4005 V 15550
SID:0004 / VPID:0203
Date 23/02/2017

2600:000000:0004:0103:1FFF:0203:F7 E9 A7 00 19 57 CD 00 F7 E9 A7 00 19 57 CD 00

Do I need to replace IFFF to 0500 for keys to work properly? or something else need to be updated?
 

zoobihoobi

Registered
Messages
55
Thanks a lot....
At last it worked. Channel is opening.

I updated 1FFF with 0500 and now constant.cw file is like this and it worked to opening the channel....

PTV SPORTS Paksat (38.E)
TP: 4005 V 15550
SID:0004 / VPID:0203
Date 23/02/2017

2600:000000:0004:0103:0500:0203:F7 E9 A7 00 19 57 CD 00 F7 E9 A7 00 19 57 CD 00

So it means constant.cw combination was not correct. ECMPID was wrong
 

zoobihoobi

Registered
Messages
55
Need help again. Today I was trying Pbnigma image for wetek play as openpli is very simple. I also tried openspa and this biss through oscam.server with constant.cw worked for both image.

Somehow it is not working for Pbnigma image. The other strange thing is that I am unable to open oscam webinterface from browser. When I see oscam.conf file. The ip is correct. I think Oscam.emu is not starting correctly. I can access all files through filezilla and can see oscam.server file correctly read for biss reader and constant.cw file is correctly placed in usr/keys location.

I think some issue in Oscam installed from Pbnigma plugin download page.

Since web interface is not working, how to share the log file

When I go Cam manager through Pb blue button menu. I can see Oscam.emu is green and showing your cam is active and cw0 and Cw1 is showing old key which was changed last month.

I know its getting complex :)
 

zoobihoobi

Registered
Messages
55
Somehow now webinterface is working but when I go to files section and click oscam.server. It shows nothing whereas fileZilla showing oscam.server file under etc/tuxbox/config_emu folder.

I managed to get log as well which is attached.

https://pastebin.com/rJUL2CYa
 

Rickk

Registered
Messages
2,375
(reader) Myconstantcw [constcw] proxy initialized, server /etc/tuxbox/scce/constant.cw:0
2017/04/04 19:25:31 746E765E p (constcw) Local reader: biss (file: /usr/keys/constant.cw)
2017/04/04 19:25:31 746E765E p (reader) biss [constcw] proxy initialized, server /usr/keys/constant.cw:0
2017/04/04 19:25:31 29E329E7 h (webif) webif: decompressed 169552 bytes back into 409864 bytes
2017/04/04 19:25:31 00000000 [Emu] info: FFDecsa parallel mode = 32
2017/04/04 19:25:31 29E329E7 h (webif) HTTP Server running. ip=0.0.0.0 port=14771
2017/04/04 19:25:31 233D7C3B r reading key file: /etc/tuxbox/config_emu/SoftCam.Key
2017/04/04 19:25:31 4B3972E1 p (net) can't resolve some.server.org, error: No address associated with hostname
2017/04/04 19:25:31 4B3972E1 p (reader) CCcam [cccam] proxy initialized, server some.server.org:12500
2017/04/04 19:25:31 233D7C3B r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2017/04/04 19:25:32 233D7C3B r (reader) emulator [emu] card detected
2017/04/04 19:25:33 233D7C3B r (reader) emulator [emu] found card system emu
2017/04/04 19:25:33 233D7C3B r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2017/04/04 19:25:33 233D7C3B r reading key file: /etc/tuxbox/config_emu/SoftCam.Key
with filezilla
softcam.key after /etc/tuxbox/config_emu/SoftCam.Key
constant.cw after /etc/tuxbox/scce/constant.cw:0
delete (reader) biss [constcw] proxy initialized, server /usr/keys/constant.cw:
------------------------------------------------------------
oscam user
------------------------------------------------------------
[account]
user = dvbapi
uniq = 3
keepalive = 1
au = 1
group = 1,10
------------------------------------------------------------
oscam server
------------------------------------------------------------
[reader]
label = ccw
protocol = constcw
device = /etc/tuxbox/scce/constant.cw
group = 10
-------------------------------------------------------------
[reader]
label = emulator
protocol = emu
device = emulator
caid = 090F,0500,0604,0E00,1010,2600,FFFF
detect = cd
ident = 090F:000000;0500:000000,030B00,023800,021110,007400,007800;0604:000000;0E00:000000;1010:000000;FFFF:000000;2600:000000;0100:000000
group = 1
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;0500:023800;0500:D00040;0500:030B00
 

zoobihoobi

Registered
Messages
55
Thanks for the detailed answer. I will try in night but few clarificatio, do you want me add text you written in oscam. User and oscam.server file and also delete biss reader in oscam.server, right?
 

zoobihoobi

Registered
Messages
55
Thanks. It worked and now channel PTV sport is opening. So what was the actual issue?

Need one more help. Do you have any idea how to use PowerVu keys through this setup.

I need to use following PowerVu keys with existing Ptv keys entered in Constant.cw file and softcam.key file.

Sony Six SD Asiasat 7 (105.5E) TP.4180 V 30000
ECMKey=00: 113754C6C0CEE1
ECMKey=01: 0910927BE3F5CF

Asiasat 7 @ 105.5E FREQ : 4180 V 30000
P 0150 00 113754C6C0CEE1 ; SONY WAH
P 0180 00 113754C6C0CEE1 ; AS7 SD 4 Sony TV International Test Feed ( No Audio)
P 04A0 00 113754C6C0CEE1 ; AS7 HD 4 Vodafone Test Card
 

zoobihoobi

Registered
Messages
55
Hi

Before you answer for PowerVu. I need one clarification.
By setup you prescribed is reading keys from both constant.cw file and softcam.key

Is there a way it only reads from softcam.key As it will easy to maintain softcam.key

If I enter location of softcam.key in emu reader under device like

[reader]
label = emulator
protocol = emu
device = /etc/tuxbox/config_emu/SoftCam.Key
caid = 090F,0500,0604,0E00,1010,2600,FFFF
detect = cd
ident = 090F:000000;0500:000000,030B00,023800,021110,007400,007800;0 604:000000;0E00:000000;1010:000000;FFFF:000000;2600:000000;0 100:000000
group = 1
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;0500:023800;0500:D00040;0500:030B00

and remove ccw reader.

Will image read only from softcam.key?
 

zoobihoobi

Registered
Messages
55
I found this on the net for PowerVu to work with Oscam Emu.

Is it correct and still valid as date is 2015

http://drhans.tv/?q=node/97
http://drhans.tv/?q=node/97

But the problem is I have softcam key with valid PowerVu keys. So I need to apply same rule and it needs to be convert to constant.cw file considering service ID, ECIM PID, etc?

Is there any easy way to update and read only from SoftCam.Key file.
 

Tigertim

Registered
Messages
75
To run biss keys you can use the normal oscam, it support biss keys. You don[t need oscam emu for this.

Rename the softcam.key to constant.cw which should have valid biss keys and put it to usr/keys

Add this reader to oscam.server

[reader]
label = biss
protocol = constcw
device = /usr/keys/constant.cw
group = 1

does anyone know how to add this last bit to oscam server please, can't find anything on the net ?
trying to get biss encrypted sports feeds to work on vu+zero 4k with openvix image.
 
Top