Enigma2 on nand

anwar saheb

Registered
Messages
632
mach3 thanks for reply.how do i know that the openatv is on nand?can we use openmultiboot plugin?i extracted the files to sd,waited so long ,nothing happened?no booting?
 

lolo1

Registered
Messages
10
The flashing of E2 nand image is same as Android. Download the nand image from here and unzip the file, you will get these 4 files. (If there is no .zip at the end of nanad image file name then add .zip at th end.)

aml_autoscript
factory_update_param.aml
recovery.img
recovery.zip

Format a memory card fat32 and copy all the 4 files onto memory card and insert it into wetek.
Switch off the wetek box
Insert pin into small hole at back of wetek and keep it pressed and plug the power cable, hold the button pressed for about 20 seconds and it will start flasing the image. done
 

1999gtv

Registered
Messages
5
all the files above are there except recovery zip?
suggest a nand image that has all the above.
thanks lolo1

Will say recovery zip or update_zip depending on the image as long as you have 4 files you are good to go.Also on windows I do not use sdcard formatter instead I go to my computer find sd card then I right click on sdcard and check format as fat 32
 

mach73

Registered
Messages
1,047
How to:
- copy the files in this folder (NOT the folder) to FAT32 formatted micro SD card.
- power off WetekPlay
- insert the micro SD card
- press and hold RESET hole on the lower side of the box. Use toothpick or Wetek Reset Tool
- while still holding reset, power on the box
- wait until android update animated logo appears, release reset

Notes:
- the image contains the latest bootloader. If you wish to preserve, for some reason, the old u-boot
bootloader, please seek the other version of PBnigma NAND version.
- Kodi is not included in the image, can be downloaded separately


Thanks PB team...
 

mach73

Registered
Messages
1,047
From pcz

Hi Folks.

About the screen problem. I don't want to talk about the technical background, but this problem is kernel boot parameter related. So that's why working good for some people, and there was problem to others. Anyway, I solved it, and you can download the update from here:
https://mega.nz/#!g8VhGDyR!JkAlbAbtRp9PDvWkk1Yc-Vd2W3PRphaWAoErwWiswrA

I made also an updated Kodi v16 package, now with OE repo added:
https://mega.nz/#!xh1zTL5B!yvvvWvlKvNUbX-g9z49yJarSjZfU5iNZ-YFSiF9IStw

I also made an Kodi v15.2 package for those who want to revert back to v15:
https://mega.nz/#!NgdWlDZA!gvDeVTsE5ZnVgJR3vTWgMsK5bJAA_zJWuIGfQ2oGMfg
 
Top