Lastest Oscam for Coolstream HD1

oscam-svn8641-arm-coolstream-webif-libusb-Distribution

Changeset [8641] by depp0n
- implemented PPS for coolstream internal reader



Changeset 8640
Author:
theparasol
Message:
Loadbalancer rework by Blueven


Changeset [8639] by theparasol
Revert part of 8637 (see ticket 3307)

13.05.2013 Oscam1.20 svn8643

- Changeset [8643] by theparasol
- Enhanced the ratelimiter ecmunique with odd/even cycle check

thanks Azo_Alex

oscam-svn8645-arm-coolstream-webif-libusb-Distribution.tar.gz

Changeset 8645
Author:
theparasol
Message:

Add LBFix5 patch from Blueven


Changeset 8644
Author:
gf
Message:

griffin: Add 0x5506 to the list of supported CAIDs.

Patch by BigGyros? posted in ticket #3812.

oscam-svn8647-arm-coolstream-webif-libusb-Distribution

Changeset [8647] by theparasol
- Init ecm rc status to E_UNHANDLED


I upload this oscam, but I would be grateful if you check if this version of azo_alex works or not, because I personally have problems with svn8645 and svn 8647.

thanks

oscamarmcoolstream-8647 and oscamx86-8647

for those who had had trouble with the version of azo_alex


place this version uploaded by AngryCockroach that works for me perfectly.:


and also a version for 86

oscamarmcoolstream-8648

As I had, again problems with the compiled versions from azo_alex tested by me.

I enter willingly version inserted by AngryCockroach. That is tested perfectly functional on all cooolstream



Changeset [8648] by theparasol
- Loadbalancer fix for lb_value=0 problem tnx Blueven for providing patch


Changeset [8647] by theparasol
- Init ecm rc status to E_UNHANDLED

oscam-svn8652-arm-coolstream-webif-libusb-Distribution

this version azo_alex it is tested OK by me.


Changeset [8652] by theparasol
- Fixed a typo in webif antics config pages -> tnx Skyndas for reporting!

Changeset [8651] by theparasol
- Fixed a typo in webif readerstat pages -> tnx Skyndas for reporting!


Changeset [8650] by depp0n
- fixed compiler warning


Changeset 8649
Author:depp0n
Message:

Implemented "expected len" for T0 protocol: This dramatically accelerates card responses in coolstream internal reader, e.g.:

-> G02/G09 (0x09C7): 50ms (before: 80ms)
-> V13 (0x09C4): 120ms (before: 260ms)
-> V14 (0x098C): 70ms (before: 150ms)
-> V23 (0x098E): 110ms (before: 210ms)
-> ORF (0x0648): 95ms (before: 250ms)
-> ORF (0x0D05): 230ms (or even 125ms with mhz=1000) (before: 300ms)
-> ... and so on. All T0 cards should be perceptibly faster.

expected len for T1 and T14 are 0 which means its unknown (feel free to implement it if you know how to calculate expected len)
removed cool_timeout_init and cool_timeout_after_init. Both were a workaround and are no longer needed after this commit.

oscam-svn8656 and 8657 and 8658-arm-coolstream-webif-libusb-Distribution

Changeset [8658] by theparasol
- More fix for radegast protocol tnx goodsat for patch

Changeset 8657
Author:theparasol
Message:

Fix for connection timeout after EMM is send over cs378x

Tnx to skyjet for patch

Changeset 8656
Author:theparasol
Message:

Revert 8655 (loadbalancer knocking failed srvids on readers once)
Add new parameter in reader setup lb_whitelist_service

tnx to Blueven for providing patch

Changeset 8655
Author:theparasol
Message:
Loadbalancer:
One fast retry of a srvid on a reader that failed before if no matching readers were found.
If srvid fails again failfactor*reopenseconds are enforced on further no matching reader situations.
Tnx to Blueven for providing additional patch, report issues in forum!

oscam-svn8659-arm-coolstream-webif-libusb-Distribution

Changeset 8659
Author:theparasol
Message:

Removed check on min ecm count consecutively when oscam re-start and after retrylimit reached
Improved handling of retry limit in mode 2 & 3

More info in this ticket ​http://www.streamboard.tv/oscam/ticket/2682

Tnx Blueven for providing patch

oscam-svn8660-and 8661 e 8662 arm-coolstream-webif-libusb-Distribution

Changeset 8662
Author:Eggy123
Message:

Enable sharing of cards from local readers and cccam proxy readers into the
gbox network.
Please refer to the following thread:
​http://www.streamboard.tv/wbb2/thread.php?threadid=37309

Config changes:
oscam.conf now contains the server port of gbox
Example:
[gbox]
...
port = 1234
...

That means that the second port in devices in oscam.server is obsolete
Example:
[reader]
...
protocol = gbox
device = 192.168.1.2,9876
...

The gbox_local_cards statement in oscam.conf has also become obsolete.
In case of errors please reduce the number of cards by various filtering
mechanisms (e.g. caid)



Changeset [8661] by Deas
extend group inputfield length in web-if. fixes #3329

Changeset 8660
Author:theparasol
Message:

LB Fix for viaccess multiple ecmpids on same caid/provid

For other cas systems this was already fixed but not for viaccess.
Now in case of caid 0x500 ecm[8] & ecm[9] is put into chid of stats.
That way a not found on a certain ecmpid cant trigger srvid blacklisting.

ecm[8]/ecm[9] isnt extensive tested so in case of issues report in forum!

oscam-svn8664-arm-coolstream-webif-libusb-Distribution.tar.gz

Changeset [8664] by theparasol
- Reverted by accident LB viaccess ecmpid fix of 8660 -> recommitted



Changeset 8663
Author:
theparasol
Message:

LB Tryfix9 ...ticket/2682

oscam-svn8667-arm-coolstream-webif-libusb-Distribution.tar.gz

Changeset [8667] by bowman
Fixed debug logging that wasn't platform independent



Changeset 8666
Author:bowman
Message:

Completed support for incoming udp cache updates from csp and added experimental outgoing push (untested)


Changeset 8665
Author:Eggy123
Message:

a) Fixed bug in hello logic: start counting card number at 0 again after hello packet send
b) Switch to next state only after last packet

svn compiled by Azo_Alex

oscam-svn8665-arm-coolstream-webif-libusb-Distribution

place also oscam-svn8665-arm-CoolStream-webif-libusb-Distribution always compiled by azo_alex.

For those who have problems with the 8666 and 8667 ...... LIKE ME

on my CoolStream, the svn8665 is the last working version, at least using those compiled by azo_alex

oscamarmcoolstream-8667

This version is compiled by AngryCockroach and is working perfectly on my CoolStream.



I post this version, because the version of Azo_Alex, previously posted in :
http://www.sat-universe.com/showpost.php?p=1037507&postcount=1392

has problems on my CoolStream.(as notice of my post 1393)

I thanks AngryCockroach for this solution.

Oscam1.20 svn8668

- Changeset [8668] by bowman
Skip push to csp if source is remote cacheex for now (might cause loops).
Added sending of cache pings.

thanks Azo_Alex

oscam-svn8669-arm-coolstream-webif-libusb-Distribution.tar.gz

in the absence of your feedback, post the following versions of azo_alex that do not work on my CoolStream.





For those who had the same problems, download versions of AngryCockroach posted by me above http://www.sat-universe.com/attachment.php?attachmentid=337014&d=1369860439



Changeset 8669
Author:bowman
Message:

Added the last request type used by csp clusteredcache and cleaned things up a bit. Further discussion/testing needed proceed.

oscam-svn8675-arm-coolstream-webif-libusb-Distribution.

in the absence of your feedback, post the following versions of compiled by azo_alex that do not work on my CoolStream.





For those who had the same problems, download versions of AngryCockroach posted by me above (post 1394)

http://www.sat-universe.com/showpost.php?p=1037943&postcount=1394


Changeset [8675] by docman
Documentation update for 'ecmfmt': new option ONID.



Changeset [8674] by docman
Documentation update for CSP: TCP -> UDP.


Changeset [8673] by docman
Added new parameter 'lb_nfb_readers' to 'oscam.user', now TXT and HTML … etcetera



Changeset [8672] by docman
Added new parameter 'lb_nfb_readers' to 'oscam.user'.



Changeset [8671] by docman
Documentation update for gbox port definitions.



Changeset [8670] by manio
cosmetics: fix MHz spelling Hertz is a unit from SI and need to preserve … etc

oscam-svn8679-arm-coolstream-webif-libusb- AND oscamarmcoolstream-8678

in the absence of your feedback, post the following versions 8679 compiled by azo_alex that do not work on my CoolStream.





For those who had the same problems, download versions of AngryCockroach oscamarmcoolstram8678 posted by me here(it is perfect).

Changeset [8679] by Deas
adjust a few more text alignments in web-if

Changeset [8678] by Deas
fix some typo´s - see #3324. tnx to skyndas


Changeset [8677] by bowman
Allow for larger ping regs/replies (possible multics fix).



Changeset 8676
Author:bowman
Message:

Added csp cache peer ping times in webif (mode column). E.g: csp (12 ms). Will be shown for all csp cache peers with confirmed working bidirectional traffic.

oscam-svn8682-arm-coolstream-webif-libusb-Distribution

this version of azo_alex
is finally fully functional on my CoolStream
thanks AZO


Changeset 8682
Author:theparasol
Message:

Tryfix azbox support
Fix dvbapi part on latest code analysis posted by Gorgone


Changeset 8681
Author:
theparasol
Message:

Fix for conax PairingECMRotation issues

The ATR doesnt report correct WI, perhaps since it should only work in certified boxes and they know how to handle.
Tnx to Andyou for reporting and testing!

Changeset 8680
Author:
theparasol
Message:

Added CA PMT Server support (PMT6: PIP on DM7025 reported to have issues)
Revised the ecm requesting and ecm response handling
EMM start and handling changed (now emm on expired cards and FTA channels)
Revised the handling of controlwords (using wrong index should not happen anymore)

Reopenonzap:

Some users report that VU+ boxes needs this checked otherwise issues after a timeout response

This patch is checked by many regular users of streamboard and considered trunk ready.

oscam-svn8687-arm-coolstream-webif-libusb-Distribution

this version of azo_alex
is tested fully functional on my CoolStream thanks AZO_alex


Changeset 8687
Author:
depp0n
Message:
hide debug spam

file: 1 edited

trunk/module-dvbapi.c (11 diffs)

Changeset [8686] by depp0n
- fix "fake CAT" on free4air channels




Changeset 8685
Author:
bowman
Message:
Added csp setting: allow_reforward (default 0, no). Reforward other cacheex updates to csp peers (use with care, will cause loops).
Location:
trunk
Files:
5 edited

globals.h (1 diff)
module-cacheex.c (1 diff)
module-webif.c (1 diff)
oscam-config-global.c (2 diffs)
webif/config/cache_cacheexcsp.html (1 diff)

Changeset [8684] by docman
Updated documentation for gbox TCP -> UDP.

Changeset [8683] by docman
Removed 'decodeforever' from documentation.