Viasat

J

Janro

Registered
Messages
16
batiradi77 said:
Viasat 093e paring all cards on HD reciever SD too_OSCAM no working after update.
Click to expand...
Even if you have a valid viasat 093E card paired with a reciever from Viasat, it not possble to use it for decoding HD channels on Ferguson Ariva 200/202/203/ or Ariva link@200

But it is possible to decode SD channels on the recievers Ferguson Ariva 200/202/203. To make it work you have to have the EMU firmware and put in the correct BOX-id in the conditional acess card menu with the valid card inserted. The boxid should be in the decimal format not hex-format. Once you have typed it in, the field where you typed it, will dissapear. Restart the box and the card will work

On Ariva link@200 with Oscam or with a standalone computer with Oscam, the boxid should be in the configuration file.
In this case the boxid should be in hex-format.

Se this example

[reader]
label = reader1
description = Easymouse
protocol = mouse
device = /dev/ttyUSB0
caid = 093E
boxid = 38BF6CD3 (This is HEX)
detect = cd
group = 1
emmcache = 1,3,2
ndsversion = 2

The box-id could be read out from the box, which the card is paired with. Translation of box-id between DEC and HEX is described somewhere else. If you use a calculator, you have to remove one digit to make i work.
 
You must log in or register to reply here.
Top