unlock dm800 clone
Deutsch:
Thx vanescar
=================================
English:
Thanks vanescar
Deutsch:
Getestet von mir und funktioniert 100%
Verbinden Sie PC und Empfänger mit seriellem Kabel und ein Crossover-Netzwerkkabel
Nullmodem wenn Decoder direkte PC-zu-Pin oder Stifte, wenn mit einem Router oder Switch
einen Decoder ab
Start-Reparatur DM800
Start DreamUP_patched_by_forhike_and_natas
Klicken Sie auf das DM800-Reparatur-Center und gehen Sie wie eine normale DreamUp
das heißt, Sie treten und Macht des Decoders
Am Ende werden Sie den Fortschrittsbalken zu sehen, als ob durch Magie auf dem
Display der Dekoder 'recive IP, an dieser Stelle oder weiter mit der gleichen oder
Flashwizard DreamUp (Ich habe Flashwizard)
Thx vanescar
=================================
English:
Tested by me and working 100%
Connect PC and receiver with serial cable and a crossover network cable nullmodem
if decoder direct PC-to-pin or pins if using a router or switch
a decoder off
Start DM800-repair
start DreamUP_patched_by_forhike_and_natas
click on the DM800-repair center and proceed as a normal dreamUp
that is, click connect and power the decoder
at the end you will see the progress bar as if by magic on the display of the decoders' recive IP,
at this point or continue with the same or Flashwizard DreamUp (I used Flashwizard)
Thanks vanescar