TM5402 M3 help

[ebyard]

Hi

Have upgraded from an M2 to an M3; and got the latest patch.
Only thing is; do I need to install the add-on, and then upload keys as on the M2?

I have some PV channels working fine (e.g. 4.8E), others not, 7E channels clear, but no channels with BISS work. Will uploading a new SoftcamMotor.key file break the PV/7E channels?!

Thanks in advance

 

[barney115]

7E Channels work with patch no softcam required
SRG 13E Work with Patch no softcam required

PowerVU keys need to be manually added via Menu>System info >CAS Menu

Thanks xxxxxx Sat Hobby FOR THIS ..

1) go to MENU
2) go to System Information
3) go to CAS Menu
4) go and find an empty slot for example slot 90 press ok
　
5) select PowerVU

Scroll to Around slot 90 where powerVU Slots are located ..
　
CAS < PowerVU >
Ident 00000 for example enter 12092 [ Freq E! EurHD 9E ]

00 0000000000000000000 < enter your keys manually
01 0000000000000000000 < enter your keys manually
00 0000000000000000000
00 0000000000000000000
make sure when you make your SCAN enter correct transponder ## EXAMPLE## 12092 otherwise your channels will not work

BISS KEYS NEED To be Entered Manually via 8280 on Remote

Softcam.keys will only clear few channels minus any Biss feed channels !

Good luck : )

 

[iKeys]

Be aware it will not process multiple powervu decryptions with the same transponder. I chose the transponder with the strongest signal and changed the freq off by 5 so there was not IDENT conflict. Hopefully, this issue can be resolved in the future.

 

[manic01]

Add on built in on MK3 version.