The Bigest Problem ,(( ON)) problem

[khaled22]

Hi,

The ((ON)) problem , two types :

1- Can be solev by new Flash software, and all know that........

2- Which not solved yet by any expert
This Type of ((ON)) Problem happen from two things
a-flash and soleved by new flash software or new dump
b-After you put the new flash the receiver work fine, but you can't see any scrampled channel, and you can't put new software
If you put new software, the ((ON)) problem will coming again....
in this case the problem in Front Panl chip (( MPC89E58)) , it mustbe programmed with new and true sofware
you can program this chip by MEGAWIN programmer
But the Bigest problem , that you can't find the True sofware for this chip
and there is no any one put or have this soft
So to solve this problem finally we must have true bin soft fro this chip
and i am searching in internet and i don't find it...
So this soft must be come from Experts or Hackers

 

[khaled22]

any one have the soft bin for this chip (( MPC89E58))........
The answer no................................ untill the moment
So that is why i am called Bigest Problem

 

[khaled22]

No, Reply at all !!!!!!!!!!!!!!!!
Where is Experts

 

[khaled22]

oh my god

At the moment there is no answer !!!!!!

 

[rag]

My Echolink 'C' chip receiver has also the same 'ON' problem. When switched on , after boot the front panel shows 'ON'. No update new software. No other functions work.

Earlier the 'B' chip has the same problem and it is solved by software.

Any software to solve the 'ON' problem for 'C' chip. Please help

 

[chafiq]

ON problem

I have an ALI B DVR reciever ( Vision X 207 ).When i have updated it with the latest flash, i got that ON displayed on the front panel and refuses to function.Is there any solution to this problem?
Thanks in advance.

 

[khaled22]

on problem

Hi,

The ((ON)) problem , two types :

1- Can be solev by new Flash software, and all know that........

2- Which not solved yet by any expert
This Type of ((ON)) Problem happen from two things
a-flash and soleved by new flash software or new dump
b-After you put the new flash the receiver work fine, but you can't see any scrampled channel, and you can't put new software
If you put new software, the ((ON)) problem will coming again....
in this case the problem in Front Panl chip (( MPC89E58)) , it mustbe programmed with new and true sofware
you can program this chip by MEGAWIN programmer
But the Bigest problem , that you can't find the True sofware for this chip
and there is no any one put or have this soft
So to solve this problem finally we must have true bin soft fro this chip
and i am searching in internet and i don't find it...
So this soft must be come from Experts or Hackers

hi
10 monthes ago with out any answer , or vr5eal solution for MEGAWIN chip in front panale of these receivers:mecry:

 

[rrr969]

Working with "on problem".
Search this with instructions:
JTAG_serieC.zip
J-TAG ALI FLASH 3329C READ WRITE.zip
301D_English_V1_0.pdf

 

[mohammed tanko]

hi
10 monthes ago with out any answer , or vr5eal solution for MEGAWIN chip in front panale of these receivers:mecry:

ON PROBLEM CAN BE SOLVED NOT BY RE-PROGRAMMING (( MPC89E58)),
BUT BY RE-PROGRAMMING THE (FLASH IC) USING A PROGRAMMER.

*FLASH IC'S ARE-
>SST(SST25VF080B)
>ATMEL(AT25DF161)
>ATMEL(AT26DF161, AT26DF161A)
AND SO ON.

THIS METHOD IS APPLIED IF JTAG OR UPGRADE WITH
PC - STB FAIL TO SYNCRONIZE!!!

FLASH FILES

 

[mohammed tanko]

this is the final solution to ((ON)) problem!!!

 

[nader4]

final solution

 

[khaled22]

ON PROBLEM CAN BE SOLVED NOT BY RE-PROGRAMMING (( MPC89E58)),
BUT BY RE-PROGRAMMING THE (FLASH IC) USING A PROGRAMMER.

*FLASH IC'S ARE-
>SST(SST25VF080B)
>ATMEL(AT25DF161)
>ATMEL(AT26DF161, AT26DF161A)
AND SO ON.

THIS METHOD IS APPLIED IF JTAG OR UPGRADE WITH
PC - STB FAIL TO SYNCRONIZE!!!

FLASH FILES

this is the final solution to ((ON)) problem!!!

Hi mate
if you program the flash memory with one of these files , the reciver will working
But can't open any scrambled, can't read AbraCadabra card , and can't working with any dongle
It will be FTA reciver with out EMU
So thats why , we must reprgram MPC89E58 chip in front panal of reviver ...... thats sure 200%
Did any one can put file dump for this chip (MPC89E58)??????????

 

[mohammed tanko]

Hi mate
if you program the flash memory with one of these files , the reciver will working
But can't open any scrambled, can't read AbraCadabra card , and can't working with any dongle
It will be FTA reciver with out EMU
So thats why , we must reprgram MPC89E58 chip in front panal of reviver ...... thats sure 200%
Did any one can put file dump for this chip (MPC89E58)??????????

THEN RE-UPGRADE THE STB WITH THE LATEST FIRMWARE, EVERYTHING WORK FERFECTLY (WILL READ ABRA. MENU 2020;2121 NAGRA AU. WORK WITH DONGLE MOREBOX AND SO ON. WORK WITH EMU 100%).

 

[khaled22]

THEN RE-UPGRADE THE STB WITH THE LATEST FIRMWARE, EVERYTHING WORK FERFECTLY (WILL READ ABRA. MENU 2020;2121 NAGRA AU. WORK WITH DONGLE MOREBOX AND SO ON. WORK WITH EMU 100%).

Hi
we are mean clone receivers not orginal receivers
clone recivers killed when you update it with last software
So we must reprogram front panal chip , before put new software for revivers.....
I hope you understand me
regards

 

[rrr969]

Only now I understand this subject.

I have clone (I didn't know that before) MOREBOX 301D.
I loaded bootloader and all chunk with Jtag many times, from the April night moresat fusked clones thru satellite.
Morebox as receiver is working (and we don't need it).
Morebox as dongle is not working. Every time after JTAG I see that first flash block is again filled with FFFFFFF...
I changed dongle boot, maincode (thru rs 232) to new, old, very old - I saw FFFFFFFF.... invariably again.
I made new dongle files around 20 times liquidating command to erase flash - all was to no avail.
So I thought that the problem is not that programme maincode makes "head check" and after a decision to suicide.
But that head chip MPC 89e58af is after sat attack constantly reprogrammed.
To prove that, I soldered MPC from morebox to echolink 3020 (moresat SD receiver, ali c) with the same type of MPC.
And echolonk 3020 committed suicide! (Checked two times).
So changing maincode of morebox can not help. I thought there is the way without changing MPC, but MPC itself erase flash, not boot or maincode.
After that I've soldered (use razor blade to lift chip if u don't know) different "MPC 89e58af" to morebox. I took 2 MPCs from receivers. But morebox can work only with special MPC 89e58af.
I don't know how it looks like.
With new MPCs I used, morebox had not "On Problem" and flash was not rewritten to FFFFFF...,
but now morebox is constantly stucked with ASH (no "solution" can help).

So really the solution to morebox "On Problem" is:
How to reprogramme front chip.

Mind, I soldered megawin from working (not blocked) moresat receiver el 3020 ali c with working EMU and twin protocol etc.,
but morebox didn't come to life properly (as fta receiver it is working, as dongle - not).

 

[rrr969]

Some important info is here
http://www.keil.com/dd/chip/3925.htm

 

[aliraza63]

HI I m facing the problem something like that
I have an echolink 888 fta super plus,showing stand by mode.
Its not also connecting with loader .i have test to upgrade with receiver to receiver also but not connecting any 1 have any idea ?. whats the problem

 

[sof940]

i solved the problem i psent 3 months to look for solution , the miracle is that you buy a new chip MPC89E58AF programmed from ALGERIA and to program again the flash IC SST25Vf016B and so on with original version ( it's very old 2007/2008 I think ) and program the eeprom 24C16 with a virgin program (like we buy it for the first one and not connected to dish ) very important to make a new date of first use , hope i've helped you guys