Hello . . .
At one year of purchase of the decoder in the signature, it also happens with different images, that during operation the decoder freeze and you need to turn off and on. The problem is frequent, so it is not bearable.
I tested these images: 2-6-DM800SE-SVN-110r0-ramiMAHER, OpenPLi 4.0, and the last used the: newnigma2-stable-lean-DM800SE-v4.0.16 -ramiMAHER # ssl84D of the excellent @ramiMAHER posted here.
The only attempt performed for now is to increase from the system menu, the fan speed, thinking that the freeze may depend on a CPU overheating, but the defect he has not solved. I could try to put the thermo-conductive paste between the CPU and heatsink, but I suspect that the problems are others, perhaps borne of RAM but you can not replace.
The ROM does not use external memory used as a buffer. I do not have active plug-ins that engage the RAM.
There is a remedy to this problem or should I consider discontinued the experience with Sunray?
At one year of purchase of the decoder in the signature, it also happens with different images, that during operation the decoder freeze and you need to turn off and on. The problem is frequent, so it is not bearable.
I tested these images: 2-6-DM800SE-SVN-110r0-ramiMAHER, OpenPLi 4.0, and the last used the: newnigma2-stable-lean-DM800SE-v4.0.16 -ramiMAHER # ssl84D of the excellent @ramiMAHER posted here.
The only attempt performed for now is to increase from the system menu, the fan speed, thinking that the freeze may depend on a CPU overheating, but the defect he has not solved. I could try to put the thermo-conductive paste between the CPU and heatsink, but I suspect that the problems are others, perhaps borne of RAM but you can not replace.
The ROM does not use external memory used as a buffer. I do not have active plug-ins that engage the RAM.
There is a remedy to this problem or should I consider discontinued the experience with Sunray?
