Qviart DUAL Experimental Receiver

[zoomfx]

Hello all! Is there a change to re-upload the files from the original post? Or where can I find other copies?
All mediafire files are missing. Thanks.

 

[Ferret]

Hello all! Is there a change to re-upload the files from the original post? Or where can I find other copies?
All mediafire files are missing. Thanks.

What are the files you need ?

Links do die but there too big a file to upload here.

 

[kegnkiwi]

Good evening, I wanted to know if on the Android side our decoder supports diseqc 2.0 0 2.1? Thank you

Some people have reported success some have issues. Await the update.

 

[zoomfx]

What are the files you need ?

Links do die but there too big a file to upload here.

I've just got my Qviart Dual, installed firmware Qviart DUAL (1.06).bin and I'm looking for the best way to get 30w sat channels and iptv using aurora.apk with PTPro.IM.140 server

Where can I find the Serial Number? The one on the About->Status is not accepted.

What do you suggest? Thank you

 

[cokeaddict]

I've just got my Qviart Dual, installed firmware Qviart DUAL (1.06).bin and I'm looking for the best way to get 30w sat channels and iptv using aurora.apk with PTPro.IM.140 server

Where can I find the Serial Number? The one on the About->Status is not accepted.

What do you suggest? Thank you

Did you install 1.0.4 special before updating to 1.0.6 ?

 

[Ferret]

I've just got my Qviart Dual, installed firmware Qviart DUAL (1.06).bin and I'm looking for the best way to get 30w sat channels and iptv using aurora.apk with PTPro.IM.140 server

Where can I find the Serial Number? The one on the About->Status is not accepted.

What do you suggest? Thank you

You dont need aurora with 1.06.

Special 1.04
Factory reset
1.06

If you did not flash the special firmware before you flashed 1.06 your best to do as follows

Stock firmware 5.0
Factory Reset
Special 1.04
Factory Reset
1.06
Factory reset then set it up.

 

[Ferret]

Where can I find the Serial Number? The one on the About->Status is not accepted.

Menu-settings-about

Then highlight status and press the ok button.

 

[zoomfx]

Did you install 1.0.4 special before updating to 1.0.6 ?

Yes. I had 5.0, installed 1.0.4 and then 1.0.6. It seems to be working but I want to change the launcher and setup the channels

 

[zoomfx]

You dont need aurora with 1.06.

Special 1.04
Factory reset
1.06

If you did not flash the special firmware before you flashed 1.06 your best to do as follows

Stock firmware 5.0
Factory Reset
Special 1.04
Factory Reset
1.06
Factory reset then set it up.

Thank you. I think it's working with 1.06 but how can I change the launcher and setup a channels list?

 

[zoomfx]

Menu-settings-about

Then highlight status and press the ok button.

Yes I found it but metamango asks for a auth code part of the serial number that doesn't show

 

[drspiros]

Yes I found it but metamango asks for a auth code part of the serial number that doesn't show

Install an alternative launcher (like Aurora) to see the 4-digit number, then reboot normally to original launcher (but for the moment there is no use of metamango with 1.06 firmware).

 

[cokeaddict]

Yes I found it but metamango asks for a auth code part of the serial number that doesn't show

Go install ftv app, it will show the auth code part of the SN.

 

[kegnkiwi]

Whats this metamango is this where you turn the porn on and off?

 

[Ferret]

Whats this metamango is this where you turn the porn on and off?

Can knock up ChMax channel list and stuff.

 

[Khayr696]

Can knock up ChMax channel list and stuff.

If I'm not mistaken it is also an online editor and you can set the settings updates automatically. A friend of mine is trying it with a Cristor Tor decoder. Unfortunately for us owners of the qViart Dual we are a little penalized in certain aspects...

 

[drspiros]

Hi. Is there any solution for Netflix 4K or HD?

 

[Ferret]

Hi. Is there any solution for Netflix 4K or HD?

No and i doubt there ever will be.

 

[azerty9200]

Qviart DUAL is one of a supported Receiver on Forever Server IKS Account.

Finally, Qviart DUAL is one of a supported Receiver on Forever Server IKS Account.

How To Renew Forever Server IKS Account On my Supported Receiver Qviart DUAL?

After installing Qviart DUAL firmware cccam

Qviart DUAL (1.01).bin




And to know your SN you can install Speed-launcher-CLASS HD HD-1000000_V3.1.6_15072019.apk

https://www.mediafire.com/file/vjy2...-CLASS_HD_HD-1000000_V3.1.6_15072019.rar/file

and with the serial number of your device you can subscribe on Forever IKS Server



And to choose the startup launcher: Speed.apk,

you must install AZAMERICA_S2015_Open Settings.apk[/b]

https://www.mediafire.com/file/p39zfj4eyqrbtzx/AZAMERICA_S2015_Open_Settings.apk/file


Procedure :
1-open AZAMERICA_S2015_Open Settings
2-Apps & notifications
3-Default apps
4-Home app
5-choose MyLauncher


After first launcher boot
install channel list
and activate forever server with F1+000

and enjoy!

database_25.10.2022_Speed-CLASS HD HD-1000000_V3.1.6_15072019

MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.

www.mediafire.com

******************
We can also use the launcher Aurora.apk

another way to watch IKS channels from FOREVER server

and watch 4K movies in USB HDD with localplayer application

Aurora v1.0.1+Auto-Starter v1.0.9

MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.

www.mediafire.com

After installing Aurora.apk application

you need to install Auto-Starter-v1.0.9.apk and configure it.

Procedure:

1-open Auto-starter
2-choose
Enable : Launch custom activity on device startup
3-Choose
Override Home key
Take over as being the device launcher
3-Custom activity
Choose the activity you would like to use as your home screen
4- Choose app
Aurora
5-exit

6-After reboot

You have this menu

Select a Home app
MyLauncher
Auto-Starter (with Aurora Launcher)
MKAdService (Qviart Launcher)

7-Choose Launcher
Select Just once


NB: to exit from MyLauncher, Aurora Launcher or MKAdService

with the remote control press home button

and the launcher selection menu will appear.

************************************************************

[size=14pt]With MyLauncher I managed to prepare my own list of channels[/size]

but you have to activate only 1 satellite for example Nilesat (7.0W) DISEqC1.0 LNB1

and deactivate the other LNB2, LNB3, LNB4 before performing the blind search


Procedure :

Menu
Installation
Satellite
Antenna settings

Satellite Nilesat (7.0W) DISEqC1.0 LNB1

Satellite Astra1 (19.2E) DISEqC1.0 LNB2

Satellite Hotbird (13.20E) DISEqC1.0 LNB3

Satellite Eutelsat 25B (26.0E) DISEqC1.0 LNB4


[size=12pt]And you need to delete All Radio Channels [/size]

Menu
Settings
STB
Default
Choose
Delete All Radio Channels


********************************
bienvenido

[size=18pt]Another method to enjoy IKS FOREVER Server with choice of one of 4 launchers[/size]

https://www.mediafire.com/file/li7r...afitti_Aurora-new-v.3.6.7-07.05.2020.rar/file

[size=12pt]Procedure :[/size]

1- install Activity-Launcher-1-14-4.apk

2-install Grafitti-dual-to-S2015_V3.3.3_07052020.apk

3-install Aurora-dual-to-MediaStar_MS-Diamond Z2_NewMenu(Aurora)_V3.6.7_07052020.apk

4-install PS4_dual-to-MediaStar_MS-Diamond Z2_OldMenu(PS4)_V3.6.7_07052020.apk

5-install Speed_dual-Class HD-1000000_V3.1.6_15072019.apk


6- open Activity-Launcher


Settings

activate

Hide private activities

exit

7-choose launcher

for example MyLauncher

and execute

Launch activity

OK

exit


to exit from Launcher to another push on Home botton from remote controller

That's all, enjoy!

:surfingvt8:




********************
[size=18pt]you can use the qviart tv application to watch encrypted channels[/size]

1-we install the qviart_database.db channels on the qviart tv application

2- we install the Aurora.apk application

3-we install the same qviart_database.db channels on Aurora and activate the Forever server : F1+000

4-By the remote control we choose Home botton

5-we choose an encrypted tv channel, for example beinsport fr 1

we wait a bit and it will work

that's all, enjoy!

1) good evening team, could you reactivate the links for me because they are inaccessible THANKS 2) I just received my qviart dual 4k, I updated it on the network with 5.00 qviart dual and I want to inject it with 1.06 and it rejects it telling me that it is corrupt, could you give me a good file thank you for reading me a+
1) bonsoir l'équipe pourrait-vous me réactiver les liens car ils sont inaccessibles merci 2) je viens de recevoir mon qviart dual 4k ,j'ai fait la mise à jour sur le réseau avec le 5.00 qviart dual est je veux lui injecter le 1.06 et il le rejete me disant qu'il est conrropu sauriez-vous me donner un bon fichier merci de me lire un+

 

[cokeaddict]

1) good evening team, could you reactivate the links for me because they are inaccessible THANKS 2) I just received my qviart dual 4k, I updated it on the network with 5.00 qviart dual and I want to inject it with 1.06 and it rejects it telling me that it is corrupt, could you give me a good file thank you for reading me a+
1) bonsoir l'équipe pourrait-vous me réactiver les liens car ils sont inaccessibles merci 2) je viens de recevoir mon qviart dual 4k ,j'ai fait la mise à jour sur le réseau avec le 5.00 qviart dual est je veux lui injecter le 1.06 et il le rejete me disant qu'il est conrropu sauriez-vous me donner un bon fichier merci de me lire un+

You need to go from 5.00 to 1.0.4 special before updating to 1.0.6

 

[azerty9200]

You need to go from 5.00 to 1.0.4 special before updating to 1.0.6

ok but mine are corrupt according to the qviart

ok mais les miens sont corrompus d'après le qviart