Question about Intellian system

C

Coccolinu

Registered
Messages
9
Good day everyone,

I have an Intellian I6 marine satellite TV antenna with Edison piccollo s2+t2/c tv box and I need your help to figure out how can I set it up to find American tv channels.

I'm setting it up to the region on the main unit but I can't find these satellites on the tv box and can't search for the tv channels. Also I don't know how to access the main antenna unit I think I need some kind of program to be able to add new satellites to the list.

Also is there a way to set up access to the payed channels on THOR 5 without having a physical card in the tv box?

Thanks!
 
C

Coccolinu

Registered
Messages
9
But I can’t access any interface, I read that there is a program Aptus PC but I could not find it anywhere.
 
C

Coccolinu

Registered
Messages
9
Unfortunately I don't have the SW, maybe someone here has it and could share it, I would really appreciate it.

And following the manual I can add manually a satellite if I know all the information for the satellite but I can't add it in the TV Box afterwards because diseq is not working.
Sorry I am all new to this, maybe it is something basic but if you can explain it I m sure I'll understand :).
 
C

Coccolinu

Registered
Messages
9
Do you have anywhere I could find information about Satellites from US/Canada area so I can add it in the ACU and Picollo ?
 
C

Coccolinu

Registered
Messages
9
Thank you.

I think I don't understand fully on the website there.

When I try to input a new satellite on the ACU I need the following:
-Input the tracking frequency (MHz) and symbol rate (KHz) for vertical low band.
-Input the network ID (NID) for vertical low band.
-Input the tracking frequency (MHz) and symbol rate (KHz) for horizontal low band.
-Input the network ID (NID) for horizontal low band.
-Input the tracking frequency (MHz) and symbol rate (KHz) for vertical high band.
-Input the network ID (NID) for vertical high band.
-Input the tracking frequency (MHz) and symbol rate (KHz) for horizontal high band.
-Input the network ID (NID) for horizontal high band
-Select the Verification Method* of tracking satellite.
SIGNAL - use only signal level for tracking
DVB LOCK - use only DVB Lock signal for tracking
DVB DECODE - verify satellite using
DVB decoding method for tracking
DSS DECODE - decode only DSS Lock signal for tracking
AGC AFTER DECODE - for tracking Ka-Band satellite
-Select the Voltage Supply Method* to LNB. (AUTO is recommended)
UTO – Supply 13V or 18V to LNB
ONLY 13 V - always supply 13 V to LNB
ONLY 18 V - always supply 18 V to LNB
-Select the DISEQC Method*. (AUTO is recommended)
UTO – Supply 0KHz tone or 22KHz tone to LNB
ONLY 0 KHz – always supply 0KHz tone to LNB
ONLY 22 KHz – always supply 22KHz tone to LNB



Can I find these on the website? for example for https://www.lyngsat.com/Galaxy-19.html


Thank you for your patience.
 
C

Coccolinu

Registered
Messages
9
I’m not sure but I found on internet that is WorldView LNB. What frequency do you recommend? For north of USA.
 
S

Souldream

Registered
Messages
20
No sure ... but contact the company they will provide you link to download !

--> Alternatively, you can contact [email protected] and they will be able to provide you with a link to download the latest version.
 
You must log in or register to reply here.
Top