Problem with Qviart dual

kegnkiwi

Super VIP
Donating Member
Messages
887
This packages present present in the Android menu or do I need to install something else?...?
The special software from Qviart gives access to the forever sever, are you aware of what satellite packages this opens? You need to buy SP1 to be able to open these packages on the android side.
 

tamicia

Registered
Messages
46
are you aware of what satellite packages this opens?
I read something online but I didn't spend too much time on it, they talked about GTmedia decoders and that many s*y satellite channels could be opened.
Even using linux e2?
Or does it only work on Android?
What is SP1?
Then I'll stop here because the thread talks about something else and I don't want to lengthen it
 

kegnkiwi

Super VIP
Donating Member
Messages
887
It does not matter we can chat here. The dual is the only dual boot receiver on the market at the moment that can open lots of packages including the sky channels on 28.2, 19.e and 13e. It also opens up masses of channels on loads of satellites. This is on the android side and that is why its called special software. 1.07 is the latest. You have to purchase sp1 which can be found by googling forever sp1 but you must tell the people what receiver you have. This only works on the android side but as its a dual machine you can also run as you will know many images in multiboot as well. You can also view the viark thread on this forum as qviart is viark as there is loads of chat in there about the packages etc.
 

tamicia

Registered
Messages
46
Very interesting but for years I have only used e2 at home, with i*tv, for me it is much more convenient and fast. I only use Android sporadically, when I'm away from home. Thanks anyway
 

tamicia

Registered
Messages
46
Last question: where can I check the release of new special firmware releases? Is there a dedicated team/site or an "official" thread in addition to those present in this portal?
 
Last edited:

Ferret

Marching On Together !
Staff member
Administrator
Messages
17,502
Last question: where can I check the release of new special firmware releases? Is there a dedicated team/site or an "official" thread in addition to those present in this portal?
They get released here.

 

cokeaddict

Member
Messages
358
do I flash at startup (upde) of 1.04 and 1.07 or flash 1.04 and then update 1.07 with USB using the android menu?
Boot Android 5.0.0 then update via the menu to 1.04, then update from 1.04 via the menu to 1.07 and when complete, do a factory reset.
 

tamicia

Registered
Messages
46
ok, so 3 flashes are not necessary starting from the decoder turned off, it is sufficient to update from the android menu by choosing "update from usb"?
OK thank you
 
Top