oscam_emu_icam_patch

[Adriatic22]

This means that the owner of the server (b-server) does not have or does not use a card for Sky UK. If he still use, it is probably badly configured (timeout, not found or badcws (bad sids) with high ECM. You will still have to add a new server for Sky UK and test it with the one you are using. The problem is not the oscam or ncam configuration, but is in the servers in 99 % of the case.

 

[kegnkiwi]

You need to look at 11718 "enigma2-plugin-softcams-oscam_11718-emu-icam_all.ipk" to clear the uk sd channels. I have not seen another version of oscam clearing these channels.

 

[kegnkiwi]

To make this work it can be easy. I would start with a fresh image and install the ipk as shown above. Put your server line into oscam.server. Download a channel list with a good icam bouquet, I used vhannable rotating icam list. Go into the blue bouquets and choose the uk-icam channel bouquet and the list of channels should appear, choose a channel and it should clear.

Now with the latest images depending on what image you are using such as openatv or openpli you no longer need to download an icam channel list the standard channel list will work. Being a creature of habit I just use the channel list I have used for ages and it works fine. Sometimes if a channel wont clear in one list in choose the other.

 

[3satbox]

You need to look at 11718 "enigma2-plugin-softcams-oscam_11718-emu-icam_all.ipk" to clear the uk sd channels. I have not seen another version of oscam clearing these channels.

You sayin' I should try this one:

OSCam EMU with icam for SKY IT, UK, DE (Stream relay)

WORKING IMAGES ATV 6-7!!! 1. Accept OSCAM config files and enter old line in the reader. 2. in the Enigma settings/extras (ATV: MENU/SETTINGS/OPERATION & INTERFACE/ system settings): Set Integrate ECM in HTTP streams to YES Decrypt HTTP Streams NO Decrypt received HTTP streams NO 3. Install...

www.sat-universe.com

/or the the other that's posted next?

 

[3satbox]

Same thing "not found" in the log.
With only difference that with 11718 slyDe got those known freezers (that are not on 731)
I just don't get it.. if this one is right

Spoiler: co.de

 disablecrccws_only_for = 098D:000000;0963:000000;0960:000000;0961:000000;1884:000000;1813:000000;0500:060C00,060A00,050F00
dropbadcws = 1

Then this should be my problem

...You will still have to add a new server for Sky UK and test it with the one you are using. The problem is not the oscam or ncam configuration, but is in the servers in 99 % of the case.

??

 

[guli]

try with this version mate its the latest for sky uk . just replace and rename new bin to same name as old give permission 755 restart oscam off you go .

Once installed remember to go to webif stream relay & allow it then restart oscam all your sd channels will work good .