ON PROBALAM SOLVED ALL ECHOLINK AND CLONES 100% BY ZAWARI

[zawari]

ON PROBALAM SOLVED ALL ECHOLINK AND CLONES 100%

START LODER upgrade_ 2.0.0b. SELET BOOT LODER ABS FILE. BOOT LODER SUSSFULL OK AND 2 THIS FILE ADD ALL CUNKH OPEN AND SELET ali_dvbs_29C_030410 AND SEND FILE AND YOUR ALL ALI 3329C AND CLONES 100% OK ENJOY

http://www.4shared.com/file/Bt-1fXUl/3329-C_On_Problem_Solved_with_.html

http://www.mediafire.com/?dcp48e2eyp6qntq

 

[pippao]

The decoder not connect to serial port (the port com is ok)
thi's the message:

Open Serial Port..
Sync to serial port..
Target not connect or target is error status!

the decoder is ON the display.

by,,pippao

 

[selcuk1a]

thank's by zawari

program is tested ok...it's work..

 

[Satdz]

The decoder not connect to serial port (the port com is ok)
thi's the message:

Open Serial Port..
Sync to serial port..
Target not connect or target is error status!

the decoder is ON the display.

by,,pippao

Need the Jtag :mecry:

 

[saaimdilber]

dear zawari not ok with me this file please help thanks in adwance

 

[aftab5529]

problem in echolink

this software only work when your ic 3329c is not dead if dead then not connect to pc and not download your receiver so not resolve your problem.

 

[zeeshee]

Dear,

Please help me to find flash file for Echolink 700 fta+ & Jtag Program.
My STB halt on ON POSITION & did not start.

 

[zeeshee]

Dear FK,

Please help me to find flash file for Echolink 700 fta+ 3329b chip & Jtag Program.
My STB halt on ON POSITION & did not start.