mipsel/ccam/ etc. help with setup

C

clem58

Registered
Messages
24
Hello guys, i am in a bit of a dilemma. I will tell the story so far.
Firstly, i have VIX 3.0 or later, i have installed enigma2-plugin-cams-cccam.2.2.1.0-r....

I don't know what i have to do next ie: do i install the ccam config file by mem stk?
I have DCC downloaded.

I am hoping that there is instruction that is compatible with the duo, i have instruction for the dreambox but these confuse me and don't seem compatible with duo, even though i am told they are the same.

I am willing if someone wouldn't mind setting up for me. I have been trying for 2mths to do this but have failed miserably :(

Thanks in advance for replies guys.
 
C

clem58

Registered
Messages
24
remote server i think, i don't have a card. As far as i remember i access FTP. thanks for your reply.
 
B

Brummie

Staff member
Administrator
Messages
5,794
press the blue button usually and select the cam with the > button change it to CCcam 2.2.1 and press ok or green to start it.
 
C

clem58

Registered
Messages
24
Brummie said:
press the blue button usually and select the cam with the > button change it to CCcam 2.2.1 and press ok or green to start it.
Click to expand...

No, nothing happening. can i download and install it? either by mem stk or load it through dcc?
 
B

Brummie

Staff member
Administrator
Messages
5,794
can you see CCcam 2.2.1 in the blue panel or blue button

if it installed ok it should be there,have you restarted enigma after installing it if not reboot then go back to blue button and try and start it again.
 
C

clem58

Registered
Messages
24
I went into soft cam setup.


Active:



select ccam.2.2.1

The box is ticked, but when i click start i get the following msg - No config files found, please setupccam first in /ets/ccam.config.

On the box itself it isn't available.
 
C

clem58

Registered
Messages
24
clem58 said:
I went into soft cam setup.


Active:



select ccam.2.2.1

The box is ticked, but when i click start i get the following msg - No config files found, please setupccam first in /ets/ccam.config.

On the box itself it isn't available.
Click to expand...

I checked IPK Installer enigma2-plugin-cams-ccam.2.2.1_1.0-r0_mipsel.ipk

is installed
 
B

Brummie

Staff member
Administrator
Messages
5,794
go here for your CCCam.cfg http://www.sat-universe.com/showthread.php?t=240395 download unzip and ftp it to etc\

if you have any special lines for CS you need to add,after you have installed it ftp to etc/ then scroll down and right click on cccam,cfg and choose edit,then paste your C: line at the top of it and exit it will say save click yes,then restart your cam.

i think you should have used a blackhole image much more user friendly
 
C

clem58

Registered
Messages
24
Thanks for all your time, gratefully appreciated. i will have to knock off, early start in morn. I see what you mean by user friendly. This seems to be a bit of a struggle compared to some of the utube vids i have seem ie using black hole or maybe even dreambox. Anyway thanks n nite nite
ps i will let you know how i get on :thum:
 
Last edited:
You must log in or register to reply here.
Top