ipbox 9000hd and cccam

[michaelm]

hi guys can anyone of you image makers come up with a image with cccam full i can get one with working as client but none will work as client and server and closest was aaf image which freezes after about 20 mins and crashes and vodka as a client, i aprreciate all the wonderful work you already do and a lot of people come close but not 100%:thum:

 

[triplex1]

oscam is better my friend

 

[michaelm]

i beleive so i tried that but couldnt figure it out silly me and couldnt get it working will try again and see how i get on i couldnt figure out where to put l@nes for server/client

 

[triplex1]

put this and write on it your ip host,port,user,pass

[reader]
label=server1
protocol=cccam
device=IP,PORT
cccmaxhop=3
#caid = 0100,0500,0d00,0d05,0d02,1702,1801,1810,1833,09c4,0b00,1722, 0d22,1834,0d05,1815,0604,0d03,0d0c,1830,0622.0604.0d06
cccversion = 2.1.3
cccbuild = 3165
account=USER,PASS
#fallback=1
group=1

[reader]
label=server2
protocol=cccam
device=IP,PORT
cccmaxhop=3
#caid = 0100,0500,0d00,0d05,0d02,1702,1801,1810,1833,09c4,0b00,1722, 0d22,1834,0d05,1815,0604,0d03,0d0c,1830,0622.0604.0d06
cccversion = 2.1.3
cccbuild = 3165
account=USER,PASS
#fallback=1
group=2

[reader]
label=server3
protocol=cccam
device=IP,PORT
cccmaxhop=3
#caid = 0100,0500,0d00,0d05,0d02,1702,1801,1810,1833,09c4,0b00,1722, 0d22,1834,0d05,1815,0604,0d03,0d0c,1830,0622.0604.0d06
cccversion = 2.1.3
cccbuild = 3165
account=USER,PASS
#fallback=1
group=3

[reader]
label=server4
protocol=cccam
device=IP,PORT
cccmaxhop=3
#caid = 0100,0500,0d00,0d05,0d02,1702,1801,1810,1833,09c4,0b00,1722, 0d22,1834,0d05,1815,0604,0d03,0d0c,1830,0622.0604.0d06
cccversion = 2.1.3
cccbuild = 3165
account=USER,PASS
#fallback=1
group=4

 

[jud1255]

forgive my ignorance but where and how would i find this ?
put this and write on it your ip host,port,user,pass we all have to learn any help is definatley appreciated.
thanks jud
Ps looks like we running similar set-up

 

[nickepe]

Where do I put the aeskey in this configuration?

/Nickepe

 

[nickepe]

Newcamd.list to oscam, please help!

Ok, I´m frustrated...
How can I get my working mgcamd-configuration transfered to a working oscam-configuration? Image enigma2.

I have file camd3.config with this lines (among others):
# username: xxxxxx
# password: xxxxxx
# deskey: cardserver deskey (14 byte)
#SLOT=forshow.dyndns.org:4:1:1:1ORT1:USERASS:0102030405060708091011121314
#SLOT=watchtv.dyndns.org:4:1:1:1ORT2:USERASS:0102030405060708091011121314

I also have file newcamd.list with this lines:
CWS_KEEPALIVE = 300
CWS = forshow.dyndns.org PORT1 USER PASS 0102030405060708091011121314
CWS = forshow.dyndns.org PORT2 USER PASS 0102030405060708091011121314

This works perfect with emu mgcamd_135 but I have tried one hundred different oscam.server configurations without any luck.

Please, can someone provide the lines in a oscam.server file for me?
Do I have to change something in another file to, like oscam.user?

Thanks in advance.

/Nicke

 

[just4fun2]

S suppose you have an cccam server..so look at here

http://www.sat-universe.com/showthread.php?t=168554&highlight=oscam

 

[nickepe]

I am using PKT e2 image and have downloaded and installed oscam in plugins browser but I can´t find cccam server there.
I have found tar.gz for cccam elsewhere but can´t figure out how to install the damn thing.
then I have used tar but the only thing that comes up is two files: var.tar.gz and post_install_sifteam.sh and no cccam installed.
Please help?

 

[just4fun2]

I am using PKT e2 image and have downloaded and installed oscam in plugins browser but I can´t find cccam server there.
I have found tar.gz for cccam elsewhere but can´t figure out how to install the damn thing.
then I have used tar but the only thing that comes up is two files: var.tar.gz and post_install_sifteam.sh and no cccam installed.
Please help?

1-it is normal, every img have own setups, the PKT is not the same as SIF

2- there´s no REAL cccamd for ipboxbecause it seems to be only for MIPS & not for SH4 processor

3- the oscam is a very good & very stable emu; you can use it like server or as cccamd client or both

 

[Cr4z33]

So you people are saying that OSCAM is more stable than Incubuscamd when talking about working as a CCcam client?
Can you then help me?
I am already using OSCAM for a local SKY Italy card and there's a friend with a CCcam server that wants to give me some C lines.
What files do I have to edit and what to write in?
Btw I am using SiF Extreme v1.2 E2 in a IPBox 9000 HD.

 

[just4fun2]

you must have this in oscam server

[reader]
label = server1
protocol = cccam
device = xxxxx.dyndns.tv,12000
account = aaaaaa,bbbbbb
group = 1,2
fallback = 1
cccmaxhop = 3
caid = 0100,0500,1702,1830,1833,09c4,0D05,0622
#cccversion = 2.0.11
#cccbuild = 2892
cccversion = 2.1.4
cccbuild = 3598

Cline
user,pass
the right version of cccam is important ..that´s all, make a search her if you need more

 

[Cr4z33]

Thank you for your help.
I don't need then any other extra conf/file?
Can you tell me please if this is the right version of OSCAM considering that I am using a 093b card in the 1st slot?

Package: Oscam-93b
Version: 001-r5
Section: emucam
Architecture: sh4
Maintainer: oscam
MD5Sum: 6ed08d24733b178f602be50c9ca4f1ae
Size: 314170
Filename: Oscam-93b_001-r5_sh4.ipk
Source: none
Description: Oscam-pcsc-smargo-93b-nomagic

 

[nickepe]

you must have this in oscam server
Cline
user,pass
the right version of cccam is important ..that´s all, make a search her if you need more

In my case, not having cccam installed, just oscam, what protocol should I have?
Is newcamd a protocol?
I have it working with emu mgcamd135 with camd3.config and newcamd.list today.

Should I have something like this:
[reader]
label = server1
protocol = newcamdkey = 0102030405060708091011121314
device = xxxxx.dyndns.tv,12000
user = aaaaaa,bbbbbb
group = 1,2

or maybe like this:
[reader]
label = camd35-reader
protocol = camd35
device = xxxxx.dyndns.tv,12000
user = aaaaaa,bbbbbb
group = 1,2

or both?

 

[Cr4z33]

Oh my God you were talking about CCcam and not OSCAM, but I thought there's no build for IPBox?

 

[just4fun2]

In my case, not having cccam installed, just oscam, what protocol should I have?
Is newcamd a protocol?
I have it working with emu mgcamd135 with camd3.config and newcamd.list today.

[reader]
Label = server1
Protocol = newcamd
Key = xxxxxxxxxxxxxxxxxxxxxxxxxxxx
Device = IP,Port
Account = user,pass
Group = 1

[reader]
label = server2
protocol = camd35
device = xxxxx.dyndns.tv,12000
user = aaaaaa,bbbbbb
group = 1,2

I´m not expert so you must try & try again, google is a friend,

 

[nickepe]

Oh my God you were talking about CCcam and not OSCAM, but I thought there's no build for IPBox?

I had cccam working with AAF e2 Multimedia image but didn't like the image.
With sifteam and PKT e2 image I can't install cccam.
/Nickepe

 

[just4fun2]

I had cccam working with AAF e2 Multimedia image but didn't like the image.
With sifteam and PKT e2 image I can't install cccam.
/Nickepe

Hello, the cccam you talk about for ipbox is not a real CCCAM, it is MGCAMD with more scripts to control; look how much is big: 620216 bytes the same as mgcamd135, anyway it freeze like the other
Off course you can install it on PKT or SIF, but every img have own setup. for SIF there´s no pb i think search here on board

 

[nickepe]

Quote:
[reader]
Label = server1
Protocol = newcamd
Key = xxxxxxxxxxxxxxxxxxxxxxxxxxxx
Device = IP,Port
Account = user,pass
Group = 1

[reader]
label = server2
protocol = camd35
device = xxxxx.dyndns.tv,12000
user = aaaaaa,bbbbbb
group = 1,2

Thanks for above, oscam is working great with this setup!!! :thum:
Hopefully this supports dual tuners now...
/Nickepe